COMPUTHERM マニュアルとユーザーガイド

コンピューターサーム is a specialized brand dedicated to modern heating and cooling control technology. Manufactured by Quantrax Ltd., COMPUTHERM products are engineered to deliver precise temperature regulation, ensuring both comfort and significant energy savings.

主な製品ラインは次のとおりです。

• Wi-Fi & Digital Thermostats: Advanced controllers like the E-Series and Q-Series that offer programmable schedules and remote access via smartphone apps.
• Zone Controllers: Devices such as the Q4Z and Q10Z that allow heating systems to be divided into multiple independent zones for optimized efficiency.
• 循環ポンプ: Energy-efficient pumps (CPA/DPA series) designed for radiator and underfloor heating systems.
• Fan Coil Thermostats: Specialized controls for 2-pipe and 4-pipe fan coil systems.

From simple mechanical thermostats to complex multi-zone smart home integrations, COMPUTHERM provides versatile compatibility with standard boilers and HVAC equipment.

• How do I connect my COMPUTHERM Wi-Fi thermostat to the internet?

  To connect a COMPUTHERM Wi-Fi thermostat (e.g., E Series), downoad the mobile app, ensure your phone is on a 2.4 GHz Wi-Fi network with GPS enabled, and put the thermostat into pairing mode (usually by holding a button until the Wi-Fi icon flashes fast). Then follow the "Configure" steps in the app.

• Can COMPUTHERM thermostats control multiple heating zones?

  Yes, by using zone controllers like the COMPUTHERM Q4Z or Q10Z, you can divide your heating system into several zones. This allows individual thermostats to control specific areas independently, opening zone valves and starting the boiler only when needed.

• What should I do if the thermostat is not switching the boiler?

  First, check the batteries (if applicable) and the power supply to the receiver unit. Ensure the thermostat is paired with the receiver (for wireless models). Also, verify the wiring connections at the boiler (NO and COM terminals) and ensure the set temperature is higher than the current room temperature.

• How do I reset my COMPUTHERM thermostat to factory defaults?

  The reset procedure varies by model. For many digital models, there is a RESET button (often requiring a pin to press) or a specific button combination found in the "Settings" menu under "FAC" or similar codes. Consult your specific user manual for the exact steps.