Compatibility Mode 3 (PS5®/PS4®/PC)
This manual section explains how to select Compatibility Mode 3 on supported PlayStation®5 and PlayStation®4 consoles by using the device MODE button and observing the LED status above the PS button.
Compatibility Mode 3 — LED Status
| ターゲット | LEDインジケーターの色 |
|---|---|
| PS5®本体 | 赤 |
| PS4®本体 | 青 |
| PC (Windows® 10/11) 2 | 緑 |
- Mode selection method: を押し続けます モード ボタン 3秒 to enter Compatibility Mode 3.
- Mode cycling: を押す モード ボタンを押してモードを切り替えます。
- 選択の確認： 待って 5秒 until the LED located above the PS button stops flashing.
How to Select Compatibility Mode 3
- を押し続けます モード ボタン 3秒 入る Compatibility Mode 3.
- を押す モード ボタンを押して、利用可能なモードを切り替えます。
- To confirm your selection, 5秒待つ until the LED located above the PS button stops flashing.
- Match the LED color to your system: 赤 (PS5®), 青 (PS4®), or 緑 (PC on Windows® 10/11).
PlayStation®5 consoles / PlayStation®4 consoles
取扱説明書
ユーザーマニュアル
https://support.thrustmaster.com/product/t-flight-hotas-neo-p
PS5® consoles / PS4® consoles
MODE 3 Selection
を押す モード button for 3 seconds to enter the compatibility mode 3 (see table below).
を押す モード button to cycle through the different modes. To confirm the selection, wait 5 seconds until the LED located above the PS ボタンの点滅が止まります。
| COMPATIBILITY MODE 3 | LEDステータス |
|---|---|
|
PS5® |
赤色LEDインジケータ |
|
PS4® |
青色LEDインジケーター |
|
PC2 パソコンXNUMX |
緑色のLEDインジケータ |
1 別売り
2 Also compatible with PC (Windows® 10/11). PC compatibility not tested nor endorsed by Sony Interactive Entertainment.
3 For more information on how to select the compatibility mode, please consult the user manual available at: <a href=
トラブルシューティング
- LED keeps flashing: After cycling modes, confirm the selection by waiting 5秒 until the LED above the PS button stops flashing.
- Wrong console selected: Re-enter Compatibility Mode 3 by pressing and holding the モード ボタン 3秒, then cycle modes until the LED color matches your target (赤 for PS5®, 青 for PS4®, 緑 for PC/Windows® 10/11).
- PC expectations: PC compatibility is noted as also compatible with PC (Windows® 10/11), but it is stated as not tested nor endorsed by Sony Interactive Entertainment.
よくある質問
- How do I enter Compatibility Mode 3?
- Press and hold the MODE button for 3 seconds to enter Compatibility Mode 3.
- How do I switch between compatibility modes?
- Press the MODE button to cycle through the different modes.
- How do I confirm the selected mode?
- Wait 5 seconds until the LED located above the PS button stops flashing.
- What LED color corresponds to PS5® in Compatibility Mode 3?
- The PS5® console mode uses a Red LED indicator.
- What LED color corresponds to PS4® in Compatibility Mode 3?
- The PS4® console mode uses a Blue LED indicator.
- What LED color corresponds to PC (Windows® 10/11)?
- PC (Windows® 10/11) uses a Green LED indicator, and PC compatibility is described as also compatible but not tested nor endorsed by Sony Interactive Entertainment.
ドキュメント / リソース
| T128P Steering Controller |
参考文献
- support.thrustmaster.comsupport.thrustmaster.com
- support.thrustmaster.com/support.thrustmaster.com
- support.thrustmaster.com/product/t-flight-hotas-neo-psupport.thrustmaster.com
- support.thrustmaster.com/으로support.thrustmaster.com
- P65Warnings.ca.govwww.p65warnings.ca.gov
- スラストマスター.comwww.thrustmaster.com
- ユーザーマニュアルmanual.tools