TCP ISREMOTE Remote Control
製品仕様
- ブランド: TCP
- 製品: リモコン
- Model: ISREMOTE
- Works with any IS Motion Sensor
- Customization of luminaires
The TCP IS Remote works with any IS Motion Sensor to allow easy customization of any of your luminaires.
Remote Usage Instructions
LEDの明るさ
Set the brightness level when occupancy is sensed and luminaire is switched on.
感度
Adjust the occupancy sensing sensitivity of the sensor.
ホールド時間
Set the duration the sensor remains at full brightness before turning off or entering standby mode.
日光センサー
Preset threshold levels for the daylight sensing functions.
*In applicable sensors only
スタンバイ暗
Adjust the lux value to act as the daylight threshold. This feature enables daylight sensor functionality in all applications. (Only applicable in certain sensors)
待機時間
To set the bi-level dimming after the initial hold time. Setting standby dim level at 0% means the device will turn off after the initial hold time (Standard mode). Setting standby dim level to the other provided options will place the device in bi-level mode.
Set the current lux value as the daylight threshold. This feature enables the daylight sensor to function in all applications.
*In applicable sensors only
The daylight sensor is turned off and the sensor functions in standard or bi-level dimming mode.
オン/オフボタン
Press the ON/OFF button, the light goes to permanent on or permanent off mode, and the sensor is disabled (Must press the AUTO button to quit this mode for setting).
Display the current/latest setting parameters in LED indicators (the LED indicators will turn on for showing the setting parameters).
リセットボタン
Press RESET button, all settings go back the settings of the dip switch in sensor.
選択ボタン
Select active parameter for editing after pressing DISP. The selected function will flash.
OKボタン
Select OK to save the selected settings to the remote.
Settings will be saved to the remote but will still need sent to the device
SEND Button
Press the SEND button to upload the current settings to the fixture (Press DISP to see current settings.) The fixture will flash on/off to confirm the settings have been received.
モードで変更および保存できるプリセット パラメータを備えた 4 つのシーン モード。
自動ボタン
Press AUTO button, the sensor starts to function and all settings remain the same as the latest status before the light is switched on/off.
TEST 2s Button
The button TEST 2s is for testing purpose sensitivity only after you choose sensitivity thresholds, then you press the TEST 2s button.
The sensor goes to test mode (hold time is only 2s) automatically, meanwhile the standby period and daylight sensor are disabled. Press AUTO button to quit from this mode.
LEFT/RIGHT Buttons
Navigate to LEFT and RIGHT to choose between options of the selected parameters in LED indicators
上下ボタン
Open and close smart daylight sensor. Press UP or DOWN, enter in the setting condition, the parameter LEDs of remote control will flash to be selected, press this button to open or close smart daylight sensor.
*In applicable sensors only
美しい光に照らされたテクノロジー
30 年以上にわたり、TCP はエネルギー効率の高い照明を設計、開発し、市場に提供してきました。最先端のテクノロジーと製造専門知識のおかげで、当社は何十億もの高品質の照明製品を出荷してきました。 TCP なら、市場のニーズを満たすように設計された照明製品、つまり、スイッチを入れるたびに環境を変化させ、暖かみで包み込むような美しさを生み出す照明製品をご利用いただけます。
TCP が提供できる品質とケアの詳細については、800.324.1496 までお電話いただくか、次のサイトにアクセスしてください。 tcpi.com
325 Ｃamp私たち博士 |オハイオ州オーロラ 44202 |電話: 800.324.1496 |電話: 877.487.0516
よくある質問
Q: How do I know if my sensor is compatible with the TCP IS Remote?
A: The TCP IS Remote works with any IS Motion Sensor, ensuring compatibility for customization of luminaires.
Q: Can I adjust the daylight sensing functionality of my luminaire?
A: Yes, you can set threshold levels and adjust the sensitivity of the daylight sensor in applicable sensors.
ドキュメント / リソース
 |
TCP ISREMOTE Remote Control [pdf] 取扱説明書 ISREMOTE, ISREMOTE Remote Control, ISREMOTE, Remote Control, Control |