scentify V2 Lux Diffuser User Manual

scentify V2 Lux Diffuser

警告

製品を使用する前にすべての説明書をお読みください。

(DANGER]

• Use in environments between -10°C and 50°C only. Operation outside this ange may damage the product and cause satety hazards. For use below 2000m altitude only
• Use only the specified rated voltage. Otherwise, safety risks may occur.
• バッテリー パックまたは機器を火気や高温にさらさないでください。

[警告]

• Use only the recommended vaporizing medium. Other substances may produce toxic gases or pose a fire risk.
• Use only in conjunction with the supplied power supply device.
• Use only the safe ultra-low voltage specified by the appliance to prevent malfunction.
• If the supply cord is damaged, replace it with a special cord o ssemblv available trom the manutacturer or service agent on . Rechargeable batteries may only be replaced by qualified personne drv batteries excepted’ Do not tamper with original operating devices or functions.
• RED Article 10 (2)
• This product can be used across EU member states RED Article 10 (10)
• 本体と製品間のRF距離は20cmです
• Frequency Range: 2402-2480M Hz
• Max.RF Output Power: -1.92 dBm

FCC声明

このデバイスは、FCC 規則のパート 15 に準拠しています。操作には次の XNUMX つの条件が適用されます。

1. このデバイスは有害な干渉を引き起こすことはありません。
2. このデバイスは、望ましくない動作を引き起こす可能性のある干渉を含め、受信したあらゆる干渉を受け入れなければなりません。

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference hv one or more of the followine measures*

• Reorientorは受信アンテナを再配置します。
• 機器と受信機間の距離を広げます。
• 受信機が接続されている回路とは別のコンセントに機器を接続します。
• 販売店または経験豊富なラジオ/テレビ技術者にご相談ください。

FCC の注意:

Any changes or modifications not expressly approved by th arty responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. Not applicable

RF曝露

このデバイスは、管理されていない環境に対して定められた FCC 放射線被ばく制限に準拠しています。 この装置は、ラジエーターと身体の間の少なくとも 20cm の距離を保って設置および操作する必要があります。

ISED 声明

このデバイスには、カナダのイノベーション、科学、経済開発省のライセンス免除 RSS に準拠したライセンス免除の送信機/受信機が含まれています。操作には次の 2 つの条件が適用されます。

1. このデバイスは干渉を引き起こすことはありません。
2. このデバイスは、デバイスの望ましくない動作を引き起こす可能性のある干渉を含む、あらゆる干渉を受け入れる必要があります。 デジタル機器はカナダのCAN ICES – 3(B)/NMB – 3(B)に準拠しています。

技術仕様

• Product Name Lux Diffuser V2
• Model Scentify Lux
• Diffuser V2
• Dimensions 10 × 8 × 4in
• Oil capacity 200ml
• 巻tage 6.3W
• Power Consumption 100ml

重要

Do not pour oil directly into the device Keep upright at all times Tilting may cause damage

はじめる

ボタンコントロール

力
ディフューザーのオン/オフを切り替えるには、3 秒間押し続けます。

強度を調整する

• Press+ to increase intensity.
• Press_ to decrease intensity

アンビエント照明
Short press the power button to cycle through light colors.

工場出荷時設定にリセット
Press and hold + and -buttons simultaneously to restore factory settings.

強度レベル

CONNECTING YOUR DIFFUSER – BLUETOOTH

1. Open the Scentify App
   • Tap Bluetooth Connection
   • See Connection Tips below if your diffuser does not appear
2. Select Your Diffuser
   • Choose your diffuser from the device list
3. パスワードを入力してください
   • Enter the default password: 8888 Tap Login
4. Change password (optional)
   • Tap the About tab
   • Tap Change Password
5. Edit Device Name (optional)
   • Tap the device name or label to edit it
   • 保存をタップ接続のヒント
     • お使いの携帯電話でBluetoothが有効になっていることを確認してください
     • Allow Bluetooth permissions when prompted
     • Stay close to the diffuser during setup
     • If permissions were denied, enable Bluetooth access in your phone settings
     • Make sure the diffuser is powered on before connecting
6. Change Light color
   • Tap the color icons to change the color of the diffuser logo light.
7. 明るさを調整する
   • Tap Brightness to adjust the logo light brightness (Off, Low, or High).
8. 調整する
   • When the bottle is empty, tap Calibrate to reset the oil level to 0% Refill the bottle with oil (up to 200ml)
   • The diffuser will automatically synchronize and track the remaining oil level based on the amount added
9. オン/オフボタン
   • Tap to turn the diffuser on or off
10. スケジュールを選択
    • Tap a schedule to edit settings
    • Tap + to add a new schedule Swipe left to delete a schedule
11. Set Operating Hours
    • Select the start and end time for your schedule
12. Select Repeat Days
    • Choose the days you want the diffuser to run
    • All days are selected by default
13. 強度を調整する
    • Use – or+ to adjust intensity levels
14. Create Custom Intensity
    • Set custom spray and pause durations
15. 設定を保存
    • Tap Save to apply your schedule and settings

CONNECTING TO APP – WIFI

1. Open the Scentify App
   • Tap WiFi Connection
   • Make sure your phone is connected to a 2.4GHz WiFi network
2. Login or Create an Account
   • Login to your existing account Or create a new account
3. Add Your Diffuser
   • [デバイスの追加]をタップします
   • Select your diffuser from the device list
   • 追加をタップ
4. WiFiネットワークを選択してください
   • Choose your WiFi network Enter your WiFi password
   • Make sure your phone is connected to the same network
   • NOTE: Only 2.4GHz WiFi networks are supported.
5. セットアップを完了する
   • Wait while the app connects the diffuser to the cloud and initializes the device. Keep your smartphone and diffuser close to the router during setup. When setup is complete, enter a custom name for the diffuser if desired. Tap Confirm to finish.
6. デバイス設定を構成する
   • Tap your diffuser to access Device Control For scheduling, intensity settings, calibration, and other app functions, see the Bluetooth Setup & App Settings page

接続のヒント

• Make sure Bluetooth and WiFi are enabled on your phone
• Use a 2.4GHz WiFi network during setup
• Make sure your phone is connected to the same WiFi network you are connecting the diffuser to
• Allow Bluetooth and Location permissions when prompted
• Stay close to the diffuser during setup
• If permissions were denied, enable Bluetooth and Location access in your phone settings
• Make sure the diffuser is powered on before connecting

トラブルシューティング

クリーニング

1. Remove the oil bottle from the diffuser.
2. Empty any remaining fragrance oil from the bottle.
3. Fill the bottle with isopropyl alcohol (rubbing alcohol). For a deeper cleaning, warm water and white vinegar may also be used.
4. Remove the bottle and empty any remaining liquid
5. Run the diffuser at the highest intensity setting for approximately 15 minutes to flush the internal system.
6. Remove the bottle and empty any remaining cleaning solution.
7. Allow all parts to fully dry before refilling with fragrance oil.

メンテナンスと保管

• Power off the diffuser when the bottle is empty.
• Remove the oil bottle before transporting or storing the diffuser.
• Store the diffuser upright in a cool, dry location at normal room temperature. Clean the diffuser periodically to maintain optimal performance.
• Inspect the bottle, tubing, and seals periodically for wear or damage.

RESET THE DIFFUSER

Press and hold the + and – buttons simultaneously for approximately 5 seconds to restore factory settings.

Need Additional Help? Contact support at info@scentify.com