QUIN D520BT Label Printer User Guide

QUIN D520BT Label Printer

以上view 主な仕様

This printer is a Bluetooth thermal label printer ideal for shipping labels, barcodes, warehouse tags, and e‑commerce use. It doesn’t require ink (uses thermal printing technology).

コア仕様

• 印刷技術: Thermal (inkless) printing — no ink or toner needed.
• 最大印刷速度: Up to ~150 mm/sec.
• 解決： ~203 dpi (sharp, high‑contrast output).
• サポートされているラベル幅: ~20 – 115 mm (fits common 4″ shipping labels).

接続性:

• ブルートゥース (wireless printing from phones/tablets)
• USB (wired connection to computers)
• 携帯 & Desktop Support: Works with iOS/Android devices and Windows/Mac through the Labelife app/software.
• ポータブル&コンパクト: Lightweight design (~1100 g) with a built‑in label bin for ~500 labels.
• 使用例: Shipping labels, barcodes, warehouse tags, Amazon FBA labels, badges, and general office/retail labels.

セットアップとインストール

1. Download App/Software
   • 検索する the Labelife app on the App Store or Google Play for Bluetooth printing.
   • For PC/Mac, install the Labelife editor/driver from official support pages.
2. プリンターの接続
   • Turn on the printer and open Labelife.
   • Pair it inside the app (not in the phone’s Bluetooth menu).
   • When the app shows a green check, the printer is connected.
3. ラベルをロード
   • Open the top cover and correctly place the label roll (thermal side facing up).
   • Ensure the labels are aligned for smooth feeding.
4. 印刷
   • Choose or design your label in the app/editor and send it to print.

一般的なトラブルシューティング

1. Paper Jam or App Alerts
   • Make sure the label is correctly loaded and straight.
   • Check that the paper size set in the app matches the actual label used.
   • Clean the print head and paper sensor with 75% alcohol pads if dusty.
   • Fully close the top cover until it clicks.
2. 点滅する赤信号
   • Indicates a paper jam or dirt affecting the print head — clean and reset.
3. Bluetooth接続の問題
   • Pair from inside Labelife, not via phone Bluetooth settings.
   • Update the Labelife app to the latest version.
4. Incorrect Print Size / Skipped Labels
   • Recalibrate label sensing inside the app if using gap/mark separated labels.
   • Restart the printer and reinsert the label.

お手入れとメンテナンスのヒント

To keep your D520BT working reliably over time:

• 定期的な清掃
  • Print Head: Wipe gently with isopropyl alcohol (90%+) to remove residue.
  • Sensors & Rollers: Use compressed air to blow out dust.
  • Exterior: Clean with a soft cloth; avoid harsh chemicals.
• 定期点検
  • Inspect label guides and rollers for wear or label debris.
  • Replace worn or damaged label rolls and parts when needed.
• ソフトウェアアップデート
  • Keep the Labelife app and printer firmware (if available) updated for best compatibility and performance.
• 予防保守
  • Schedule weekly quick cleanings if used heavily (warehouses/shops).
  • Avoid printing dusty or dirty labels, which can degrade print head life.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…