LTECH KMS1 Switch Module
製品紹介
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
技術仕様
| モデル | KMS1 |
|---|---|
| ワイヤレスタイプ | スレッドよりも物質 |
| チャンネルを切り替える | 1CH |
| 営業巻tage | 100-240V~、50/60Hz |
| Max. load parameters of the relay | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| リレーサージ電流 | 70A@10ms |
| 動作温度 | -25°C〜50°C |
| 製品サイズ | 長さ45×幅45.5×高さ20.5(mm) |
| 製品重量 | 38グラム |
| 標準 | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
製品画像
寸法
- 単位: mm
- 寸法: 45 x 45.5 x 20.5
配線図
- Mechanical Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
- Push Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
NFC照明アプリを使用する
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
パラメータの編集
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
対応機種
セットアップ例ample
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
アクセサリを追加
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
制御装置
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
高度な機能
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
工場出荷時の設定に戻す
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
パワーオンリセット
停電の場合tage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
注意
- 製品の設置と試運転は、資格のある専門家が行う必要があります。
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- 放熱性が良好であれば、製品の寿命が延びます。換気を良くしてください。
- ワーキングボリュームかどうかを確認してくださいtag使用されるeは、製品のパラメータ要件に準拠しています。
- 使用するワイヤーの直径は、接続する照明器具に負荷をかけ、しっかりと配線できる必要があります。
- 製品の電源を入れる前に、照明器具に損傷を与える原因となる誤った接続の場合に備えて、すべての配線が正しいことを確認してください。
- 万が一、故障した場合は、ご自身で修理しないでください。 ご不明な点がございましたら、サプライヤーにお問い合わせください。
保証契約
保証期間は納品日から2年間です。保証期間内に品質上の問題が発生した場合、無料で修理または交換サービスが提供されます。
保証の除外
- 保証期間を超えています。
- 高容量による人工的な損傷tage、過負荷、または不適切な操作。
- 深刻な物理的損傷のある製品。
- 自然災害や不可抗力によって生じた損害。
- 保証ラベルとバーコードが破損しています。
- No contract signed by our company.
ドキュメント / リソース
 |
LTECH KMS1 Switch Module [pdf] 取扱説明書 KMS1 Switch Module, KMS1, Switch Module, Module |