製品終了view
The uwant B400 is a portable carpet and upholstery cleaner designed for deep cleaning with both steam and hot water capabilities. It features strong suction and a convenient 2-in-1 water tank system for efficient and easy use across various surfaces.
設定
Before first use, ensure all components are present and undamaged. The cleaner is designed for quick assembly.
- コンポーネントを解凍します: Remove the main unit, hose, cleaning heads, and solution from the packaging.
- ホースを取り付ける: Securely connect the flexible hose to the main unit's designated port.
- Select Cleaning Head: Choose the appropriate cleaning head for your task (e.g., wide brush for carpets, narrow for crevices, or steam brush for specific steam cleaning). Attach it firmly to the end of the hose.
- 水タンクに水を入れる: The 2-in-1 water tank integrates both clean and dirty water compartments. Remove the tank, open the clean water cap, and fill with water (up to 1.2 liters). Add 1 ounce of uwant Textile Cleaning Solution per 34 ounces of water. Securely close the cap and reinsert the tank into the unit.
Figure 1: The 2-in-1 water tank allows for easy filling and emptying in one step.
操作手順
The uwant B400 offers both hot water and steam cleaning modes for versatile stain removal.
- 電源オン: Plug the unit into a power outlet. Press the power button on the main unit.
- モードの選択： On the handle, press the hot water button once for hot water mode (149°F). Press the steam button twice for steam mode (212°F). Allow approximately 35 seconds for the unit to heat up for steam.
- クリーナーを塗る： For stubborn stains, apply cleaning solution directly to the stain before activating the machine.
- きれいな表面: Press the trigger on the cleaning head to dispense water or steam. Move the cleaning head slowly over the stained area, scrubbing as needed. The powerful 18Kpa suction will extract the dirty water into the waste compartment of the 2-in-1 tank.
Figure 2: Deep cleaning with both hot water (149°F) and steam (212°F) modes.
Figure 3: Step-by-step guide for stubborn stain removal.
Video 1: Official demonstration of the uwant B400 Carpet Steam Cleaner in action.
メンテナンス
定期的なメンテナンスにより、クリーナーの最適なパフォーマンスと寿命が確保されます。
- 水タンクを空にしてきれいにする: After each use, remove the 2-in-1 water tank. Empty the dirty water from its compartment and rinse both compartments thoroughly with clean water. Allow to air dry before reassembling.
- Self-Cleaning Hose: The unit includes self-cleaning accessories. Attach the self-cleaning tool to the hose nozzle and run clean water through the system to flush out any residue from the hose.
- 添付ファイルを消去: Detach and rinse all cleaning heads and brushes under running water. Remove any trapped debris or hair.
Figure 4: The self-cleaning hose feature helps maintain hygiene and prevents clogs.
トラブルシューティング
問題が発生した場合は、次の一般的な解決策を参照してください。
- 吸引なし: Check if the 2-in-1 water tank is correctly seated. Ensure the dirty water compartment is not full. Verify the hose and cleaning head are securely attached and free from blockages.
- 水/蒸気供給なし: Ensure the clean water tank is filled and properly installed. Check if the selected mode (hot water or steam) has completed its heating cycle (indicated by the light). Verify the trigger on the cleaning head is fully pressed.
- ユニットの電源が入らない: Confirm the power cord is securely plugged into a working outlet. Press the main power button firmly.
- 洗浄結果が悪い: Ensure you are using the recommended uwant Textile Cleaning Solution. Pre-treat stubborn stains. Use the appropriate cleaning head and apply consistent, slow passes over the area.
仕様
- ブランド： 欲しい
- モデル名: B400
- 色： グレー
- 商品の重量: 4.83 ポンド
- 製品寸法: 奥行き12.2インチ x 幅6.3インチ x 高さ11.61インチ
- 容量： 1.2 Liters (2-in-1 Water Tank)
- 吸引力: 18Kpa
- Steam Mode Temperature: 最高212°F
- Hot Water Mode Temperature: 最高149°F
- 電源: AC
保証とサポート
uwant provides a 1-year warranty for the entire product. For any inquiries or assistance, 24/7 after-sale support is available. Please refer to the contact information provided in your product packaging for direct support.
