1. はじめに
This manual provides essential information for the safe and efficient operation of your VEVOR Laser Engraver L8. This Class 1 laser engraving and cutting machine features a 20W laser output, a 15.7 x 15.7 inch (400 x 400 mm) working area, and a maximum engraving speed of 30,000 mm/min. It is designed for engraving and cutting various materials such as wood, leather, paper, and acrylic. Please read this manual thoroughly before using the device.
2. 安全情報
Your VEVOR Laser Engraver L8 is a Class 1 laser product, designed with comprehensive safety features. Adhering to these safety guidelines is crucial to prevent injury and damage.
- 目の保護: The machine features a protective enclosure that filters laser light. Always ensure the enclosure is closed during operation. Never look directly at the laser beam.
- 緊急停止： An emergency stop button is provided for immediate shutdown in case of an unexpected event. Familiarize yourself with its location.
- Tilt Stop: The machine is equipped with a tilt stop mechanism that automatically halts operation if the device is tilted beyond a safe angle.
- 制限スイッチ： Integrated limit switches prevent the laser head from exceeding the working area, enhancing operational safety.
- セキュリティロック: A security lock mechanism is included to prevent unauthorized use.
- Smoke and Fumes: The enclosure helps block smoke. Ensure adequate ventilation in your workspace.
- 材料の適合性: Only engrave or cut materials specified as safe. Avoid highly reflective or transparent materials without proper preparation (e.g., black coating). Do not attempt to cut metals or transparent/translucent acrylic.
3. セットアップ
The VEVOR Laser Engraver L8 is designed for ease of use and comes largely pre-assembled, ready to use out of the box. Follow these steps for initial setup:
- 開梱: Carefully remove the engraver and all accessories from the packaging. Inspect for any shipping damage.
- 配置: Place the machine on a stable, level surface in a well-ventilated area. Ensure sufficient space around the unit for operation and maintenance.
- 電源接続: Connect the power adapter to the machine's DC24V socket and then to a suitable power outlet.
- ソフトウェアのインストール: Install the appropriate software on your computer. The engraver supports LaserGRBL (Windows, for low-speed devices only), LightBurn (Mac OS/Windows, paid license required), and CutLabX (Mac OS/Windows/App).
- 接続性: Connect the machine to your computer via USB or utilize Wi-Fi for CutLabX App (App only).
4. 操作手順
Operating your VEVOR Laser Engraver L8 involves preparing your design, setting up the machine, and initiating the engraving or cutting process.
- デザイン準備: Create or import your design using compatible software (LightBurn, LaserGRBL, CutLabX). Adjust settings such as power, speed, and passes according to the material and desired outcome.
- マテリアルの配置: Place your material securely on the honeycomb workbench within the 15.7 x 15.7 inch working area.
- Auto Positioning: Utilize the built-in HD camera for precise auto-positioning of your design on the material, minimizing waste.
- フォーカス調整： Ensure the laser is properly focused on the material surface for optimal results.
- 運用開始： Close the protective enclosure. Initiate the engraving or cutting process through your software. Monitor the process closely.
- オフライン彫刻: The machine supports offline engraving, allowing you to operate without a continuous computer connection once the file 読み込まれます。
5. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your VEVOR Laser Engraver L8.
- クリーニング： Regularly clean the lens of the laser module with a soft, lint-free cloth and appropriate cleaning solution. Keep the working area and internal components free of dust and debris.
- レールとベルトの検査: Periodically check the aluminum frame, optical axis rails, and drive belts for wear or damage. Ensure they are clean and move smoothly.
- 排気システム: Ensure the smoke exhaust fan is clear of obstructions and functioning effectively to maintain proper ventilation.
- ファームウェアの更新： VEVOR公式をチェック website or software for any available firmware updates to ensure your machine operates with the latest features and improvements.
6。 トラブルシューティング
このセクションでは、発生する可能性のある一般的な問題に対する解決策を示します。
- マシンの電源が入らない: Check the power cable connection and ensure the power outlet is functional. Verify the power switch is in the 'ON' position.
- レーザーが発射されない: Ensure the protective enclosure is fully closed. Check software settings for laser power and enable status. Verify the laser module is securely connected.
- 彫刻/切断品質が悪い: Adjust laser focus. Verify material settings (power, speed, passes) in your software. Clean the laser lens. Ensure the material is flat and securely placed.
- マシンがコンピューターに接続されない: Check USB cable connection or Wi-Fi settings. Ensure correct drivers are installed for your operating system. Restart both the machine and computer.
- 予期せぬ停止: Check for error messages in the software. Ensure no safety features (e.g., tilt sensor, lid-open sensor) have been triggered.
If issues persist, refer to the software documentation or contact VEVOR customer support.
7. 仕様
| 特徴 | 仕様 |
|---|---|
| 商品型番 | L8 |
| レーザータイプ | Single Blue Light, Diode |
| レーザー出力 | 20W |
| レーザークラス | 1年生 |
| レーザー波長 | 455 nm |
| レーザースポットサイズ | 0.12×0.15ミリ |
| 有効作業面積 | 15.7 x15.7インチ/400 x 400 mm |
| 最大彫刻速度 | 30000mm/分 |
| ソフトウェアの互換性 | LaserGRBL (Windows), LightBurn (Mac OS/Windows, Paid License Required), CutLabX (Mac OS/Windows/App) |
| 正味重量 | 33.7 ポンド / 15.3 kg |
| 製品寸法 | 24.1 x 25.0 x 9.8 インチ / 612 x 634 x 250 mm |
8. 保証とサポート
保証情報、技術サポート、サービスに関するお問い合わせは、公式VEVORにお問い合わせください。 website or contact VEVOR customer service directly. Specific warranty terms and support procedures may vary and are typically provided with your purchase documentation.
VEVOR公式 Webサイト： www.vevor.com
