Alpine BRV-S65 6.5" BassRev™ Speaker Set Instruction Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine BRV-S65 6.5" BassRev™ Speaker Set. Designed for optimal audio performance, these speakers integrate advanced technologies to deliver clear, powerful sound in your vehicle. For best results, please read this manual thoroughly before installation and use.

製品終了view

The Alpine BRV-S65 speakers are part of the BassRev series, engineered to work seamlessly with Alpine's Optimate DSP amplifiers for enhanced audio tuning and performance. This series focuses on delivering extended low frequencies and balanced tonal playback.

図1: 前面 view of the Alpine BRV-S65 6.5 inch BassRev speaker, showcasing the cone and surround design.

図2：背面 view of the Alpine BRV-S65 6.5 inch BassRev speaker, showing the magnet and terminals.

主な特徴:

• Powerful & Efficient Performance: Delivers 150W peak and 50W RMS with a 4-ohm impedance (DCR 3.7 ohms) for clean, distortion-free sound.
• OPTIM Sync Technology: Features Alpine’s dynamic bass boost algorithm and built-in pre-EQ for extended low frequencies and balanced tonal playback at all volumes. This technology is designed to work optimally with Alpine's PXE-C80-88 DSP amplifier。
• H.E.D.G.E Surround Design: High Excursion Design Gathered Edge provides symmetrical cone movement for greater output and deeper, more accurate bass. This unique rubber surround increases output and low-frequency extension.
• Premium Build & Materials: Rigid polypropylene-mica cone construction with a sleek gunmetal topcoat enhances both performance and in-car aesthetics.
• Wide, Unified Soundstage: Phase Sync’d coaxial design aligns acoustic output between the woofer and tweeter for seamless sound dispersion and an immersive listening experience.

製品終了view ビデオ：

セットアップとインストール

The Alpine BRV-S65 speakers are designed for straightforward installation in most vehicles. For optimal performance, it is highly recommended to pair these speakers with an Alpine Optimate DSP amplifier, such as the PXE-C80-88. This amplifier provides built-in tuning profiles specifically calibrated for BassRev speakers, simplifying the setup process and ensuring the best possible sound quality.

• Component Speakers: The BRV-S65 is a coaxial speaker system. For component systems in the BassRev series, no passive crossover is included. This design allows for full active tuning via a DSP, providing precise control over each speaker element.
• DSP Integration: When using an Optimate DSP amplifier, select the appropriate speaker size and type from the amplifier's menu. This will apply the pre-tuned settings for optimized audio output.
• 取り付け: Ensure proper mounting in your vehicle's speaker locations. The speakers are designed for flush mount installation. Refer to your vehicle's specific audio system requirements for exact fitment.
• 配線： スピーカーを amplifier using appropriate gauge speaker wire. Ensure correct polarity for all connections.

手術

Once installed and connected, operate your Alpine BRV-S65 speakers through your vehicle's head unit and connected amplifier. Adjust volume and audio settings (bass, treble, balance, fader) as desired. If using an Alpine Optimate DSP amplifier, utilize its advanced tuning capabilities to customize your sound experience further.

• Avoid excessive volume levels for prolonged periods to prevent speaker damage and hearing loss.
• スピーカーの接続が確実に保たれているか定期的に確認してください。

メンテナンス

The Alpine BRV-S65 speakers require minimal maintenance. Keep the speaker grilles free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive cleaners, as these can damage the speaker cone or surround materials.

• Ensure no foreign objects obstruct the speaker cone's movement.
• Inspect wiring periodically for any signs of wear or damage.

トラブルシューティング

If you experience issues with your Alpine BRV-S65 speakers, consider the following common troubleshooting steps:

• 音が出ない: ヘッドユニットから amplifier and from the ampスピーカーへの接続を確認してください。 amplifier is powered on and functioning correctly. Verify audio source selection.
• 歪んだ音: 音量を下げてください。 amplifier gain settings; excessive gain can cause distortion. Ensure speaker wires are not frayed or shorting. Verify that the speakers are not over-powered or under-powered by the amplifier。
• 弱い低音: Confirm correct polarity of speaker connections. If using a DSP, ensure the bass boost and low-pass filter settings are configured appropriately.
• 断続的な音: Inspect all connections for looseness. Check for any kinks or damage in the speaker wiring.

If problems persist after performing these checks, consult a professional car audio technician or contact Alpine customer support.

仕様

箱の中身

• 1x Alpine BRV-S65 6.5" BassRev™ Speaker Set

保証とサポート

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Alpine webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。