1.製品オーバーview
The GEYA GRT6-B1 is a compact, electronic adjustable delay off time relay designed for various industrial and domestic applications. It features a single pole double throw (1NO1NC) output and is suitable for DIN rail mounting. The delay time can be conveniently set using the panel knobs, offering a wide range from 0.1 seconds to 10 days.
- 高性能: Delay settings are easily adjustable via panel knobs for intuitive operation.
- 機能モード: Supports Delay OFF (Function B) operation.
- 時間範囲： Adjustable from 0.1 seconds to 10 days, divided into 10 distinct ranges.
- Relay Status Indication: Equipped with LED indicators; a green light for power and a red light for working status.
- コンパクトなデザイン: Ultra-small size, only 18mm width, designed for 35mm DIN rail mounting.
図1: 前面 view of the GEYA GRT6-B1 Delay Off Time Relay, showing control knobs and LED indicators.
2. 安全情報
Please read this manual carefully before installation and operation. Failure to follow these instructions may result in equipment damage, personal injury, or death. Always observe local and national electrical codes.
- 設置とメンテナンスは資格のある担当者のみが行う必要があります。
- 配線やメンテナンスを行う前に、必ず電源を切ってください。
- 正しいボリュームを確認するtagデバイスを接続する前に、電源と電流定格を確認してください。
- 指定された動作条件を超える環境でデバイスを操作しないでください。
- デバイスを湿気、ほこり、極端な温度から保護してください。
3.製品の寸法
The GRT6-B1 relay features a compact design suitable for space-constrained installations. Refer to the diagram below for detailed dimensions.
Figure 2: Detailed dimensions of the GEYA GRT6-B1 relay in millimeters.
4.設置と配線
4.1 取り付け
The GEYA GRT6-B1 is designed for standard 35mm DIN rail mounting. Ensure the rail is securely fastened and provides adequate space for ventilation and wiring.
4.2配線接続
Connect the power supply and load according to the wiring diagrams provided. The GRT6-B1 model features A1(+) and A2(-) for supply terminals, S for trigger terminal, and 15, 16, 18 for the 1SPDT output contacts (15-16 normally closed, 15-18 normally open).
Figure 3: Terminal layout and LED indicators for GRT6-A1 and GRT6-B1 models.
図4：例ample wiring diagrams for GRT6-A1/B1 (1SPDT) and GRT6-A2/B2 (2SPDT) models.
4.3 インストールデモビデオ
Watch this video for a visual guide on connecting power and load to the GRT6-B1 relay.
Video 1: This video demonstrates the power connection, load access, time setting, and operation of the GEYA GRT6-B1 delay off time relay with a light bulb.
5. 操作手順
5.1 Function Mode (Delay OFF)
The GRT6-B1 operates in Delay OFF mode (Function B). In this mode, when input voltage U is applied, the relay contacts change state immediately and timing begins. When the delay time is complete, the contacts return to their shelf state. If input voltage U is removed before the delay is complete, the contacts return to their shelf state immediately. The trigger switch is not used in this function.
Figure 5: Timing diagrams for Delay ON (A) and Delay OFF (B) functions.
5.2 時間設定
The delay time is set using two rotary knobs on the front panel: one for the time range and one for the percentage of that range.
- Adjust Time Range Knob: Select the desired time range (e.g., 10s, 1m, 1h, 1d, 10d).
- Adjust Percentageノブ: Fine-tune the delay time within the selected range by setting a percentage (e.g., 50% of 10s = 5 seconds).
例えばample, to set a delay of 5 minutes:
- Adjust the time range knob to '10m' (10 minutes).
- Turn the percentage knob to '50%' (50% of 10 minutes = 5 minutes).
Figure 6: Illustration of time setting using the time range and percentagノブ。
6. 技術仕様
The following table details the technical specifications for the GEYA GRT6 series relays, including the GRT6-B1 model.
| 技術的パラメータ | GRT6-A1/B1 | GRT6-A2/B2 | GRT6-At/Bt |
|---|---|---|---|
| 関数 | A:delay ON; B:delay OFF | ||
| 供給端子 | A1-A2 | ||
| 巻tage範囲 | AC/DC 24-240V (50-60Hz) | ||
| 重荷 | AC0.7～3VA/DC0.5～1.7W | AC最大6VA/1.9W | |
| 巻tage範囲 | AC 230V（50-60Hz） | ||
| 電源入力 | AC最大6VA/1.3W | AC最大6VA/1.9W | |
| 供給量tageトレランス | -15%; +10% | ||
| 供給表示 | 緑色LED | ||
| 時間範囲 | 0.1s-10days, ON, OFF | ||
| 時間設定 | ポテンショメーター | ||
| 時間偏差 | 10%-機械設定 | ||
| 繰り返し精度 | 0.2%設定値安定性 | ||
| 温度係数 | 0.05%/°C, at=20°C (0.05%/°F, at=68°F) | ||
| 出力 | 1×SPDT | 2×SPDT | 1×SPDT(del)+1SPDT(ins) |
| 現在の評価 | 10A / AC1 | ||
| スイッチングボリュームtage | 250VAC / 24VDC | ||
| 最小遮断容量DC | 500mW | ||
| 出力表示 | 赤色LED | ||
| 機械寿命 | 1×107 | ||
| 電気寿命（AC1） | 1×105 | ||
| リセット時間 | 最大200ミリ秒 | ||
| 動作温度 | -20°C ～ +55°C (-4°F ～ 131°F) | ||
| 保管温度 | -35°C ～ +75°C (-22°F ～ 158°F) | ||
| 取付方法／DINレール | DIN レール EN/IEC 60715 | ||
Figure 7: Technical specifications for GEYA GRT6 series time relays.
7。 トラブルシューティング
If the relay does not function as expected, consider the following common issues:
- No Power Indication (Green LED off): 電源の接続を確認し、電圧を確認してくださいtage is within the specified range (AC/DC 24V-240V).
- 負荷が切り替わらない: Verify the load wiring. Ensure the load's voltage and current requirements do not exceed the relay's contact ratings (10A/AC1, 250VAC/24VDC). Check if the red LED indicates working status.
- 遅延時間が正しくありません: Re-check the settings on both the time range and percentage knobs. Ensure they are set according to your desired delay.
- 断続動作: Inspect all wiring for loose connections. Ensure the operating environment is within the specified temperature and humidity limits.
If issues persist, consult a qualified electrician or contact GEYA customer support.
8. メンテナンス
The GEYA GRT6-B1 relay is designed for reliable, long-term operation with minimal maintenance. Follow these guidelines:
- クリーニング： デバイスを清潔に保ち、ほこりやゴミを取り除いてください。清掃には乾いた柔らかい布を使用してください。液体クリーナーは使用しないでください。
- 検査： 配線接続部の締め付け具合や摩耗、損傷の兆候がないか定期的に点検してください。
- 環境： Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature aging or malfunction.
9. 保証とサポート
GEYA products are manufactured to high-quality standards and come with a standard warranty against manufacturing defects. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official GEYA website. When contacting support, please have your product model (GRT6-B1) and purchase information available.