uwant Wet Dry Vacuum Cleaner D600 Instruction Manual

1. はじめに

The uwant Wet Dry Vacuum Cleaner D600 is an all-in-one cleaning solution designed for hard floors. It combines vacuuming and mopping functionalities, featuring advanced self-cleaning, odor removal, and efficient drying capabilities. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new appliance.

2. 主な特徴

• UWANT Push-in Design: Effortlessly docks into the base station for convenient storage and charging without leaving water marks.
• Triple Odor Removal: Features dual odor-removal sticks to keep water odor-free for up to 7 days and an IPX6+ washable roller brush with 100℃ hot water and air sterilization.
• Smart RGB Self-Cleaning Base Station: Provides one-stop cleaning with color-coded lights for dust cleaning (green), deep cleaning (blue), UV-C sterilization (purple), and infrared-assisted hot air drying (red).
• Lower than 13cm Lay-Flat: Designed to reach under low furniture like sofas and beds, ensuring no missed spots.
• 23000Pa Strong Suction with 3 Modes: Includes Smart Cleaning Mode (AI-adjusted suction), MAX mode (for tough stains), and Dry mode (for dry debris without water).
• Triple Water Levels and 50-Minute Runtime: Offers three water levels for different cleaning needs and a long-lasting battery for up to 280㎡ coverage. Its 3-side design cleans close to walls.
• 0 Gravity Handle: Ergonomically designed for easy operation with minimal wrist strain, adapting to different heights and angles.

3. 箱の中身

Your uwant D600 package includes the following components:

• uwant Wet Dry Vacuum Cleaner D600 main unit
• Self-cleaning base station
• 電源アダプター
• 2 x Roller brushes (one pre-installed, one spare)
• 2 x HEPA filters (one pre-installed, one spare)
• 洗浄液
• クリーニングブラシ
• ユーザーマニュアル

Figure 1: uwant D600 Wet Dry Vacuum Cleaner and included accessories.

4. セットアップ

1. ハンドルを組み立てる: ハンドルを掃除機本体にカチッと音がするまでしっかりと差し込みます。
2. Place the Base Station: Position the self-cleaning base station on a flat, dry surface near a power outlet.
3. 接続電源： Plug the power adapter into the base station and then into a wall outlet.
4. ユニットを充電する: Place the vacuum cleaner onto the base station. The push-in design allows for easy docking. The unit will begin charging automatically.
5. きれいな水タンクを満たします。 Remove the clean water tank from the main unit. Fill it with clean water and add the recommended amount of uwant Deep Cleaning Solution (30ml per 1 liter of water). Reattach the tank securely.

5. 操作手順

電源のオン/オフとモードの選択

• 電源オン: Press and hold the power button on the handle to turn on the vacuum cleaner.
• モード選択: Use the mode button to cycle through Smart Cleaning Mode, MAX mode, and Dry mode. The digital display will indicate the current mode.
• 電源を切る： 電源ボタンを押したままにして、デバイスの電源を切ります。

水位調整

The vacuum cleaner offers three water levels to suit different cleaning needs:

• 減水: Ideal for light dust, hair, and minor puddles on wooden floors.
• Medium Water: Suitable for tile and hard floors, effectively clearing food debris and daily messes.
• High Water: Provides maximum power for dried spills, sauces, and stuck-on grime.

Figure 2: Three adjustable water levels for varied cleaning tasks.

Lay-Flat and Edge Cleaning

• 180°フラット設計: The vacuum can lay almost completely flat (lower than 13cm) to easily clean under furniture.
• トリプルエッジクリーニング： The unique design allows for thorough cleaning along walls and into corners, leaving no dirt behind.

Figure 3: The 180° lay-flat design allows access to low-clearance areas.

Figure 4: The 3-edge design ensures thorough cleaning along edges and corners.

6. メンテナンス

Smart RGB Self-Cleaning Base Station

After each use, return the vacuum cleaner to its base station. The Smart RGB Self-Cleaning Base Station will automatically initiate a cleaning cycle for the roller brush and internal components. The process involves four stages indicated by different light colors:

• 緑色のライト: Basic dust cleaning.
• 青色光: Deep cleaning of the roller.
• パープルライト： UV-C sterilization.
• 赤信号: Infrared-assisted hot air drying (100℃) for 100% dry and clean results.

Figure 5: The base station's RGB lights indicate the self-cleaning stage.

Cleaning the Dirty Water Tank and Roller Brush

• Empty Wastewater: Regularly empty the dirty water tank. The integrated deodorizer stick helps keep the wastewater odor-free for up to 7 days.
• リンス成分: The roller brush and its motor are IPX6+ waterproof, allowing for direct rinsing under water to prevent bacteria buildup. The base station tray is also removable for easy cleaning.

Figure 6: The triple odor removal system includes deodorizer sticks and a washable roller brush.

7。 トラブルシューティング

• 洗浄性能が低い: Ensure the clean water tank is filled with water and cleaning solution. Check if the dirty water tank is full and needs emptying. Clean the roller brush and filter regularly.
• 不快な臭い: Utilize the deodorizer sticks in the dirty water tank. Ensure the roller brush and all removable parts are thoroughly cleaned and dried after use. Run the full self-cleaning cycle with hot air drying.
• 吸引力の低下: Check for blockages in the suction path or the roller brush area. Ensure the filter is clean and properly installed.
• バッテリーが充電されていません: Verify that the vacuum cleaner is correctly docked in the base station and the power adapter is securely plugged into a working outlet.

8. 仕様

9.保証とサポート

The uwant Wet Dry Vacuum Cleaner D600 comes with a 1-Year Whole Machine Warranty. For any inquiries or assistance, 7×24 hour after-sales service is provided to offer round-the-clock support.

10. 製品ビデオ