Skullcandy Uproar ワイヤレスイヤホン 取扱説明書

1. はじめに

Welcome to the Skullcandy Uproar Wireless Earbuds user manual. This guide provides detailed instructions on how to set up, operate, and maintain your new earbuds. The Skullcandy Uproar earbuds offer a powerful audio experience with features designed for convenience and durability.

• Massive 46-Hour Battery + Rapid Charge: Enjoy extended listening with up to 46 hours of total battery life. A quick 10-minute charge provides 2 hours of playback.
• 非常にクリアな通話: Quad microphones with Environmental Noise Cancellation (ENC) ensure clear communication in various environments.
• Immersive Skullcandy Sound: Equipped with 10mm drivers for rich bass and clear highs, enhancing your music, movie, and podcast experience.
• Seamless Multipoint Connectivity: Easily switch between two paired devices, such as your smartphone and laptop, without needing to disconnect and reconnect.
• Built for Everyday Life: Designed to be sweat and water resistant, featuring low-latency Bluetooth v5.4, convenient Type-C charging, and intuitive touch controls.

2. 箱の中身

Your Skullcandy Uproar Wireless Earbuds package includes the following items:

• Skullcandy Uproar Wireless Earbuds
• 充電ケース
• USB-C充電ケーブル
• Ear Gels (Small, Medium, Large)
• ユーザーマニュアル（クイックスタートガイド）

Image: Skullcandy Uproar Wireless Earbuds and Charging Case. The earbuds are black, with the Skullcandy skull logo visible. The charging case is also black, with the Skullcandy logo on the front.

3. セットアップ

3.1 電源のオン/オフ

Your earbuds come with a partial charge, allowing you to start using them immediately.

• 電源オン: Remove the earbuds from the charging case. They will automatically power on. Alternatively, press and hold the multifunction button on either earbud for 2 seconds. You will hear a voice prompt say "Power On, Ready to Pair."
• 電源を切る： Place the earbuds back into the charging case and close the lid. They will automatically power off.

3.2Bluetoothペアリング

The earbuds will automatically enter pairing mode when powered on for the first time or when manually put into pairing mode.

1. 手動ペアリング： To manually enter Bluetooth pairing mode, press and hold the multifunction button on either the left or right earbud for 3 seconds.
2. デバイスに接続します: Open the Bluetooth settings on your smartphone or other Bluetooth-enabled device. Look for "Uproar" in the list of available devices and select it.
3. ペアリングの確認: Confirm the pairing request on your device. Once successfully paired, you will hear a voice prompt say "Connected."

Image: A person wearing a Skullcandy Uproar Wireless Earbud in their right ear, demonstrating the fit and design.

4. 充電

To charge your Skullcandy Uproar earbuds and their case:

• イヤホンを充電ケースに入れます。
• Connect the included USB-C charging cable to the USB-C port on the charging case.
• ケーブルのもう一方の端を互換性のある USB 電源に接続します。
• ケースの LED インジケーターに充電状態が表示されます。

Image: Skullcandy Uproar Wireless Earbuds placed inside their open charging case, showing the charging contacts.

5。 操作制御

The Skullcandy Uproar earbuds feature intuitive touch controls on both the left and right earbuds for various functions.

5.1 基本的な制御

• ボリュームアップ： Press the multifunction button on the 右 イヤホンを1秒間押し続けます。
• ボリュームダウン： Press the multifunction button on the 左 イヤホンを1秒間押し続けます。
• 再生/一時停止: Single tap the multifunction button on どちらか イヤフォン。
• トラックフォワード: Triple tap the multifunction button on the 右 イヤフォン。
• 後方追跡： Triple tap the multifunction button on the 左 イヤフォン。
• 通話に応答: Single tap the multifunction button on どちらか イヤフォン。
• 通話を拒否: Press the multifunction button on どちらか イヤホンを1秒間押し続けます。
• 通話終了: Double tap the multifunction button on どちらか イヤフォン。

5.2つのEQプリセット

The earbuds offer different Equalizer (EQ) modes to optimize your audio experience.

• EQモードの切り替え： Double tap the multifunction button on どちらか the left or right earbud. Continue double tapping to cycle through the modes.
• 利用可能なモード: Music Mode, Movie Mode, Podcast Mode.

5.3 マルチポイントペアリング

Multipoint pairing allows your earbuds to connect to two devices simultaneously.

• 有効化/無効化: Press the multifunction button on 両方 earbuds simultaneously for 1 second.

5.4 低遅延モード

This mode reduces audio delay, ideal for gaming or watching videos.

• 有効化/無効化: Tap the multifunction button on the 左 earbud four times.

5.5 Activate Native Assistant

Access your device's voice assistant (e.g., Siri, Google Assistant).

• 活性化： Tap the multifunction button on the 右 earbud four times.

6. メンテナンス

To ensure the longevity and optimal performance of your Skullcandy Uproar earbuds:

• クリーニング： イヤホンと充電ケースは、柔らかく乾いた布で定期的に拭いてください。刺激の強い化学薬品や研磨剤の使用は避けてください。
• イヤージェル: Remove and clean the ear gels periodically with mild soap and water. Ensure they are completely dry before reattaching.
• ストレージ： 使用していないときは、ほこりや損傷から保護するために、イヤホンを充電ケースに保管してください。
• 耐水性: While sweat and water resistant, avoid submerging the earbuds in water. Dry them thoroughly if they get wet.

7。 トラブルシューティング

イヤホンに問題が発生した場合は、次の手順を試してください。

7.1 Resetting Earbuds

If you experience connectivity issues or other malfunctions, performing a factory reset may resolve the problem.

• 工場出荷時設定へのリセット： Press and hold the multifunction button on どちらか the left or right earbud for 8 seconds. This will restore the earbuds to their original factory settings.

7.2一般的なトラブルシューティング

• 電源なし: イヤホンと充電ケースが完全に充電されていることを確認してください。
• ペアリングの問題: Make sure Bluetooth is enabled on your device and the earbuds are in pairing mode. Try forgetting the device from your phone's Bluetooth list and re-pairing.
• 音が出ない: デバイスとイヤホンの両方の音量レベルを確認してください。イヤホンが正しく接続されていることを確認してください。

8. 仕様

9. Official User Guide Video

For a visual guide on setting up and using your Skullcandy Uproar Wireless Earbuds, please refer to the official user guide video below. This video covers unboxing, powering on/off, Bluetooth pairing, basic controls, EQ presets, multipoint pairing, low latency mode, native assistant activation, and resetting.

10. 保証とサポート

For warranty information, product support, or to address any issues not covered in this manual, please visit the official Skullcandy support webサイト。

サポート Webサイト： https://support.skullcandy.com

It is recommended to contact customer support before filing a warranty claim, as many issues can be resolved quickly with direct assistance.