DEERC リモートコントロール救助ヘリコプター SQN-002 取扱説明書

導入

The DEERC Remote Control Rescue Helicopter SQN-002 offers a realistic and engaging flight experience, inspired by actual emergency aircraft. Designed for both beginners and experienced enthusiasts, this helicopter features aerodynamic rotor blades, a detailed cockpit, and rescue markings. It serves as an excellent introduction to aviation and STEM concepts, providing stable and precise control for indoor and outdoor use in calm conditions.

Image: The DEERC Remote Control Rescue Helicopter SQN-002 in its red variant, showcasing its realistic design and LED lights during flight.

箱の中身

Upon unboxing your DEERC Remote Control Rescue Helicopter SQN-002, you will find the following components:

• 1 x RC Helicopter
• 1×リモコン（電池は含まれていません）
• モジュラーバッテリー2個
• 4 x Main Rotor Blade (A/B)
• テールローターブレード×2
• 1 x USB-C充電ケーブル
• ドライバー x 1
• 製品マニュアル x 1

Image: A visual representation of all items included in the DEERC Remote Control Rescue Helicopter SQN-002 package, laid out neatly.

設定

1. バッテリーの充電: Use the provided USB-C charging cable to fully charge both modular batteries. The LED indicator on the cable will typically change color or turn off when charging is complete.
2. Install Helicopter Battery: Carefully insert one charged modular battery into the helicopter's battery compartment. Ensure it is securely connected and the compartment cover is closed.
3. リモートコントローラーの電池を取り付けます。 Open the battery compartment on the remote controller using the provided screwdriver. Insert 3 AAA batteries (not included), ensuring correct polarity. Close the compartment.
4. 電源オン: Turn on the helicopter using its ON/OFF switch. Place it on a flat, level surface. Then, turn on the remote controller. The remote and helicopter will automatically pair, indicated by a solid light on both devices.

Image: The DEERC Remote Control Rescue Helicopter SQN-002, highlighting its two modular batteries and the USB-C charging cable for convenient power management.

操作手順

The DEERC Remote Control Rescue Helicopter is designed for flexible and accurate maneuvering, suitable for various skill levels.

• ワンキー離陸/着陸: Press the dedicated one-key takeoff button on the remote for effortless launch. The helicopter will automatically ascend to a stable hovering altitude. Press the one-key landing button to initiate a smooth, controlled descent.
• 高度維持: The built-in gyroscope and altitude hold system ensure stable hovering, allowing you to focus on directional control without constant throttle adjustments.
• 方向制御: Use the left joystick for ascending/descending and rotating left/right. Use the right joystick for moving forward/backward and strafing left/right.
• 速度設定: The 3.5-channel transmitter offers adjustable speed settings (low, medium, high) to match your skill level. Experiment with different speeds for varied flight experiences.
• 2.4GHz Anti-Interference: Advanced 2.4GHz technology allows multiple helicopters to fly simultaneously without signal interference, ideal for group play.
• 低バッテリリマインダー： LED indicators on the helicopter will warn you when the battery is low, prompting you to land and recharge.

Image: The DEERC Remote Control Rescue Helicopter SQN-002 hovering above a helipad, illustrating its one-button takeoff/landing and altitude hold features, along with various speed modes.

メンテナンス

Proper maintenance ensures the longevity and optimal performance of your DEERC Remote Control Rescue Helicopter.

• ローターブレード検査: メインローターブレードとテールローターブレードに損傷（ひび割れ、曲がりなど）がないか定期的に点検してください。損傷したブレードは、付属のスペアパーツとドライバーを使用して直ちに交換してください。
• バッテリーのケア： Always fully charge batteries before use. Do not overcharge. Store batteries in a cool, dry place when not in use.
• クリーニング： Use a soft, dry cloth to clean the helicopter body. Avoid using water or harsh chemicals, which can damage electronic components.
• ストレージ： 使用していないときは、ヘリコプターとリモート コントローラーを直射日光や極端な温度を避けて安全な場所に保管してください。

トラブルシューティング

If you encounter any issues with your DEERC Remote Control Rescue Helicopter, refer to the following common solutions:

• ヘリコプターが応答しない: Ensure both the helicopter and remote controller are powered on and fully charged. Re-pair the devices by turning both off and then on again.
• 不安定な飛行/漂流: Perform a calibration by placing the helicopter on a flat surface and following the calibration steps in the detailed product manual. Check for any bent or damaged rotor blades and replace if necessary.
• 短い飛行時間: Ensure batteries are fully charged. Over time, battery capacity may decrease. Consider replacing older batteries if flight time significantly reduces.
• Rotor Blades Not Spinning: Check for obstructions around the rotor blades. The intelligent safety system automatically powers off the rotor if blocked. Clear any debris and restart.
• リモコンの問題: Replace AAA batteries in the remote controller if it is unresponsive. Ensure no other 2.4GHz devices are causing interference nearby.

仕様

Image: A graphic summarizing the key product specifications for the DEERC Remote Control Rescue Helicopter SQN-002, including dimensions, weight, battery life, and control range.

安全情報

Please adhere to the following safety guidelines to ensure a safe and enjoyable experience:

• Children under 14 should use this product with adult supervision.
• ヘリコプターは常に、人、動物、障害物から離れた広い場所で操縦してください。
• Do not fly near power lines, trees, or water bodies.
• Avoid flying in strong winds, as this can lead to loss of control.
• 作動中は回転ブレードに絶対に触れないでください。
• 使用していないときはヘリコプターとリモートコントローラーの電源をオフにしてください。

保証とサポート

The DEERC Remote Control Rescue Helicopter SQN-002 comes with a 3-month warranty. For any product inquiries, technical support, or warranty claims, please contact DEERC customer service. Refer to the official DEERC website or the contact information provided in your product manual for detailed support options.

For additional information and to explore other DEERC products, visit the DEERCストア.