1. はじめに
This manual provides detailed instructions for the setup, operation, and maintenance of your NETUM RD-1202W Industrial Bluetooth Barcode Scanner. The RD-1202W is a robust and versatile 2D/1D barcode reader designed for various industrial and commercial applications, offering multiple connectivity options and enhanced durability.
主な機能は次のとおりです。
- 工業耐久性: IP67 rated for dust, splash, and water resistance, with drop protection up to 12 ft (3.65 m).
- 柔軟な接続性: Supports 2.4G wireless and Bluetooth (HID/SPP/BLE) for connection to various devices.
- 複数のスキャンモード: Manual trigger, continuous, auto-sensing, and storage modes.
- 優れたスキャンパフォーマンス: Advanced 1.3M CMOS sensor for fast and accurate reading of 1D and 2D barcodes.
- 長いバッテリー寿命: 2600mAh battery provides extended operation and charging via the included cradle.
2.製品オーバーview
The NETUM RD-1202W barcode scanner is designed for ergonomic handling and robust performance. Below is an illustration of the scanner and its charging dock.
図2.1: NETUM RD-1202W Barcode Scanner and Charging Dock. The image displays the yellow and black scanner resting in its black charging cradle, highlighting its ergonomic design and the scanner's lens.
2.1 パッケージ内容
パッケージにすべてのアイテムが揃っていることを確認します。
- NETUM RD-1202W Barcode Scanner
- Charging Dock with 2.4G Receiver
- USBケーブル
- ユーザーマニュアル（このドキュメント）
3. セットアップと接続
The RD-1202W offers both 2.4G wireless and Bluetooth connectivity options.
3.1 スキャナの充電
- Connect the USB cable to the charging dock and then to a power source (e.g., computer USB port or USB power adapter).
- スキャナーを充電ドックに置きます。充電のために正しい位置合わせを行ってください。
- The scanner's indicator light will show charging status. A full charge typically takes approximately 4 hours.
The 2600mAh battery provides up to 20 hours of continuous operation or 30 working days if scanning 2000 barcodes per day.
3.2 2.4Gワイヤレス接続
This method uses the 2.4G receiver built into the charging dock for a plug-and-play experience.
- Connect the charging dock to your computer's USB port using the provided USB cable. The computer should automatically recognize the receiver.
- バーコードスキャナーをオンにします。
- The scanner will automatically pair with the receiver. A successful connection is usually indicated by an audible beep and/or a change in the scanner's indicator light.
The communication distance for 2.4G wireless is 30-100m (line of sight).
3.3 Bluetooth接続
The scanner supports HID, SPP, and BLE modes for connecting to laptops, PCs, smartphones, tablets, iPhones, iPads, and POS systems.
- デバイスで Bluetooth を有効にします。 Ensure Bluetooth is active on your host device (e.g., computer, tablet, smartphone).
- Set Scanner to Bluetooth Mode: Scan the specific "Bluetooth Pairing" barcode from the included quick start guide or the full manual (if provided separately) to put the scanner into Bluetooth pairing mode. The scanner's indicator light will typically flash to indicate it's discoverable.
- デバイスとペアリング: On your host device, search for available Bluetooth devices. Select "NETUM RD-1202W" (or similar name) from the list.
- 接続を確認: Once paired, the scanner will emit a confirmation beep, and its indicator light will change to a steady state.
Refer to the specific setting barcodes in the manual for switching between HID, SPP, and BLE modes if required by your application.
4. スキャナーの操作
The RD-1202W offers various scanning modes to suit different operational needs.
4.1 スキャンモード
- 手動トリガーモード: トリガーボタンを押すと、各バーコードを個別にスキャンできます。これがデフォルトモードです。
- 連続スキャンモード: The scanner continuously emits a scan beam, reading barcodes as they pass within its field of view トリガーを押さなくても。
- 自動検知スキャンモード: The scanner activates its beam only when a barcode is detected in its proximity, providing hands-free operation while conserving battery.
- ストレージモード： When out of range of Bluetooth or 2.4G wireless connectivity, the scanner can store up to 100,000 barcodes in its internal memory (2MB flash memory). To upload stored data, re-establish connection and scan the "Upload Data" barcode (refer to the full manual for specific setting barcodes).
To switch between these modes, scan the corresponding setting barcodes found in the detailed user manual provided with the product.
4.2 Barcode Scanning Procedure
- スキャナーの電源がオンになっており、ホスト デバイスに接続されていることを確認します。
- Point the scanner's lens at the barcode you wish to scan.
- For manual trigger mode, press the trigger button. For continuous or auto-sensing modes, position the barcode within the scan area.
- A successful scan is indicated by an audible beep and/or a green light flash. The scanned data will be transmitted to your connected device.
The scanner is equipped with an advanced 1280H × 1024V pixels (1.3M) CMOS sensor, allowing it to read various small barcodes smoothly (1D: ≥3 mil; 2D: ≥5 mil (HD); 2D: ≥7 mil (SR)).
5. メンテナンス
適切なメンテナンスを行うことで、バーコード スキャナーの寿命が長くなり、最適なパフォーマンスが確保されます。
- スキャナーのクリーニング: 柔らかく糸くずの出ない布で軽く拭き取ってください。ampened with water or a mild cleaning solution to wipe the exterior of the scanner and the scanning window. Avoid abrasive cleaners or solvents.
- バッテリーのケア： To maximize battery life, avoid fully discharging the battery frequently. Store the scanner in a cool, dry place when not in use for extended periods.
- 環境保護: While the scanner is IP67 rated for dust and water resistance, prolonged exposure to extreme conditions should be avoided. Do not submerge the scanner in water.
- ストレージ： Store the scanner and its accessories in a safe place, away from direct sunlight, extreme temperatures, and corrosive materials.
6。 トラブルシューティング
If you encounter issues with your NETUM RD-1202W scanner, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スキャナーの電源が入りません。 | バッテリー残量が少ない、または電源に問題があります。 | Charge the scanner using the charging dock and USB cable. Ensure the cable and power source are functional. |
| スキャナーがデバイスに接続されません。 | Incorrect connection mode, out of range, or pairing issue. |
|
| Scanner reads barcodes inaccurately or not at all. | Damaged barcode, dirty scanning window, or incorrect symbology settings. |
|
| Scanned data does not appear on the screen. | Application not in focus or input field not active. | Ensure the cursor is in the desired input field of your application (e.g., text editor, POS software). |
問題が解決しない場合は、NETUM カスタマー サポートにお問い合わせください。
7. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | RD-1202W |
| 接続性 | 2.4G Wireless, Bluetooth (HID/SPP/BLE) |
| センサー | 1280H × 1024V pixels (1.3M) CMOS |
| スキャン速度 | High-speed global exposure, Max frame rate 120FPS |
| Barcode Resolution | 1D: ≥3 mil; 2D: ≥5 mil (HD); 2D: ≥7 mil (SR) |
| バッテリー | 2600mAhリチウムポリマー |
| 予想されるバッテリー寿命 | 20 hours continuous operation (approx. 30 days with 2000 scans/day) |
| 予想充電時間 | 4時間 |
| フラッシュメモリ | 2MB（最大100,000個のバーコードを保存） |
| 通信距離 | 30～100m（見通し距離） |
| 耐久性 | IP67 (Dust-proof, Splash-proof, Waterproof), 12 ft (3.65 m) drop protection |
| 寸法（パッケージ） | 8.66 x 5.91 x 3.15インチ |
| アイテム重量 | 14.1オンス |
| メーカー | ネトゥム |
8. 保証とサポート
NETUMは 1年間保証 from the date of purchase for the RD-1202W barcode scanner. This warranty covers manufacturing defects and ensures product reliability.
For technical support, warranty claims, or any inquiries regarding your NETUM product, please contact NETUM customer service. Contact information can typically be found on the NETUM official webサイトまたは購入プラットフォームを通じて購入できます。
保証を有効にするために購入証明書を保管してください。
