Cudy AP1200 屋外用

Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) User Manual

モデル: AP1200 屋外

1.製品オーバーview

The Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) is designed to provide reliable and high-speed Wi-Fi connectivity in outdoor environments. It supports the latest 802.11ac Wave 2 technology, offering dual-band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. Key features include MU-MIMO, Beamforming, IP65 waterproof rating, 4KV lightning protection, and flexible Power over Ethernet (PoE) options.

Cudy AC1200 Gigabit Outdoor Wireless Access Point with key features listed

Figure 1: Cudy AP1200 Outdoor Wireless Access Point Overview

2. パッケージ内容

パッケージに以下のすべてのアイテムが含まれていることを確認してください。

  • AP1200 Outdoor Wireless Access Point
  • 電源アダプター
  • Detachable Antennas (2 units)
  • 電源コード
  • 取り付けキット
  • イーサネットケーブル
  • インストールガイド(このマニュアル)

3.ハードウェアオーバーview

3.1 外見

フロント view of the Cudy AP1200 Outdoor Wireless Access Point

Figure 2: Cudy AP1200 Outdoor Access Point

3.2 LEDインジケーター

The device features several LED indicators to show its status:

  • 電源LED: 電源の状態を示します。
  • LAN LED: イーサネット接続ステータスを示します。
  • 2.4GHz Wi-Fi LED: 2.4GHz ワイヤレス アクティビティを示します。
  • 5GHz Wi-Fi LED: 5GHz ワイヤレス アクティビティを示します。

3.3 ポートとボタン

The device includes the following ports and buttons:

  • RJ45 Port (PoE-IN): Used for both data and power input via Power over Ethernet.
  • リセットボタン: 工場出荷時の設定を復元するために使用されます。
  • アンテナコネクタ: Two RP-SMA connectors for detachable antennas.
Close-up of the RJ45 PoE-IN port on the Cudy AP1200 Outdoor

Figure 3: RJ45 Port with PoE-IN

4. セットアップとインストール

4.1 アンテナの取り付け

Carefully screw the two detachable 5dBi antennas onto the RP-SMA connectors on the device. Ensure they are securely fastened but do not overtighten.

Cudy AP1200 Outdoor with two detachable antennas attached

Figure 4: Antennas Attached to AP1200 Outdoor

4.2 Power over Ethernet (PoE)接続

The AP1200 Outdoor supports 802.3at/af PoE or 24~50V passive power supply. Use the included PoE adapter to power the device and connect it to your network.

  1. Connect one end of an Ethernet cable to the LAN port of your router or network switch.
  2. Connect the other end of this Ethernet cable to the 'LAN' port on the PoE adapter.
  3. Connect one end of the included Ethernet cable to the 'PoE' port on the PoE adapter.
  4. Open the protective cover on the AP1200 Outdoor and connect the other end of the Ethernet cable from the PoE adapter to the RJ45 (PoE-IN) port on the AP.
  5. Plug the PoE adapter into a power outlet. The device will power on, and the Power LED will illuminate.

4.3取り付けオプション

The AP1200 Outdoor can be mounted on a pole or a wall using the provided mounting kit. Choose a location that offers optimal Wi-Fi coverage and is protected from direct impact.

  • ポールマウント: Use the straps and brackets to secure the device to a pole.
  • 壁掛け: Use screws and anchors to attach the device to a wall.
Diagram showing both wall-mounting and pole-mounting options for the Cudy AP1200 Outdoor

Figure 5: Mounting Options (Wall and Pole)

5。 動作モード

The Cudy AP1200 Outdoor supports multiple operating modes to suit various network requirements:

  • アクセスポイント (AP) モード: Connects to a wired network and transforms it into a wireless network, allowing multiple Wi-Fi devices to connect.
  • エクステンダーモード: 既存のワイヤレス ネットワークの範囲を拡張します。
  • ルーターモード: プライマリ ルーターとして機能し、接続されたデバイスにインターネット アクセスを提供します。
  • WISPモード: Connects wirelessly to an Internet Service Provider (ISP) network and shares the connection with local devices.
  • メッシュルーターモード: Creates a seamless mesh Wi-Fi network with other compatible devices.
アクセスポイントモードの設定を示す図

アクセスポイントモード

ルーターモードの設定を示す図

ルーターモード

リピーターモードの設定を示す図

リピーターモード

WISPモードの設定を示す図

WISP モード

6. 設定

To configure the AP1200 Outdoor, connect a computer to the device via Ethernet or Wi-Fi. Access the webを使用したベースの管理インターフェイス web ブラウザ。

  1. Ensure your computer is connected to the AP1200 Outdoor (either directly via Ethernet or to its default Wi-Fi network).
  2. 開く web ブラウザを開き、デフォルトのIPアドレス(通常は 192.168.10.1 or refer to the Quick Installation Guide) in the address bar.
  3. デフォルトのユーザー名とパスワードを入力します(通常は admin 両方に当てはまります。
  4. Follow the on-screen wizard to set up your desired operating mode, Wi-Fi name (SSID), and password.
  5. 設定を保存し、プロンプトが表示されたらデバイスを再起動します。

7. メンテナンス

7.1ファームウェアアップデート

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Visit the Cudy official website for the latest firmware for your AP1200 Outdoor model.

7.2 クリーニング

As an outdoor device with an IP65 rating, the AP1200 Outdoor is protected against dust and water. However, periodic cleaning can help maintain its appearance and prevent excessive buildup. Use a soft, damp 外側を拭く際は布を使用してください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。

7.3 環境への配慮

The device is designed to operate in a wide range of outdoor temperatures (-40°C to 65°C). Ensure proper ventilation and avoid placing it in direct sunlight for prolonged periods if possible, to maximize lifespan.

Illustrations of the Cudy AP1200 Outdoor's weatherproof features including rain-proof, extreme temperature resistance, lightning/surge protection, and dust-proof design.

Figure 6: Weather-Proof Design

8。 トラブルシューティング

If you encounter issues with your AP1200 Outdoor, refer to the following common troubleshooting steps:

  • 電源なし: Ensure the PoE adapter is correctly plugged into a power outlet and the Ethernet cable is securely connected to the AP's PoE-IN port. Check the power LED.
  • インターネットアクセスなし: Verify that your main router has internet access. Check the Ethernet cable connections between the router, PoE adapter, and AP. Ensure the AP is configured in the correct operating mode.
  • Wi-Fi信号が弱い: Adjust the antenna orientation. Relocate the AP to a more central position or higher elevation. Check for physical obstructions.
  • アクセスできません Web 管理ページ: Ensure your device is connected to the AP's network. Verify the IP address entered in the browser is correct. Try clearing your browser's cache or using a different browser.
  • 工場出荷時設定へのリセット: If problems persist, you may need to perform a factory reset. With the device powered on, use a paperclip to press and hold the Reset button for approximately 5-10 seconds until the LEDs flash. The device will restart with factory default settings.

9. 仕様

特徴説明
モデル名AP1200 屋外
製品寸法9.45 x 3.94 x 2.11インチ
アイテム重量14.6オンス
ワイヤレス標準802.11ac ウェーブ2
周波数帯域クラスデュアルバンド(2.4 GHz & 5 GHz)
Wi-Fi速度(5GHz)最大867Mbps
Wi-Fi速度(2.4GHz)最大300Mbps
アンテナ2 external 5dBi detachable antennas
ポート1x RJ45 (PoE-IN)
電源802.3at/af PoE or 24~50V Passive PoE (adapter included)
天候保護IP65 rated waterproof housing, 4KV lightning protection
動作温度-40°C ~ 65°C
対応デバイスパソコン、防犯カメラ、スマートテレビ、スマートフォン、タブレット

10. 保証情報

Cudy products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cudy webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

11. テクニカルサポート

If you require further assistance or have questions not covered in this manual, please contact Cudy Technical Support. You can find contact information, FAQs, and additional resources on the official Cudy webサイト:

  • Webサイト: www.cudy.com
  • メールアドレス: 参照 webサポート メール アドレスのサイト。

関連文書 - AP1200 屋外

前view Cudy RE 1200 AC1200 デュアルバンドレンジエクステンダー - Wi-Fiカバレッジを強化
AC1200デュアルバンドレンジエクステンダー、Cudy RE 1200をご紹介します。このデータシートでは、その機能、仕様、そしてWi-Fiエクステンダーとアクセスポイントのデュアル機能について解説し、デッドゾーンを解消してネットワークパフォーマンスを向上させます。
前view Cudy RE1200 屋外用クイックインストールガイド:セットアップとペアリング
Cudy RE1200 屋外用Wi-Fiエクステンダーまたはアクセスポイントのインストール、電源投入、ペアリング、設定方法をステップバイステップで解説します。セットアップ方法、LEDステータスインジケーター、取り付け手順も記載されています。
前view Cudy AP1200 クイックインストールガイド
Cudy AP1200 アクセス ポイントのインストールと構成に関する簡潔なガイドです。電源オプション、ソフトウェア構成方法 (スタンドアロンおよびコントローラ モード)、コンプライアンス情報などを網羅しています。
前view Cudy アクセス ポイント クイック インストール ガイド
このガイドでは、Cudyアクセスポイント(AP1200、AP3000)のセットアップと設定手順について説明します。DCアダプタ、PoEアダプタ、またはPoEスイッチを介したデバイスへの電源供給、APコントローラの有無にかかわらずAPの設定について説明します。また、LEDステータスインジケータと基本的なネットワーク設定情報も含まれています。
前view Cudy AP3000 屋外用クイックインストールガイド
Cudy AP3000 屋外アクセス ポイントのインストールと構成に関する手順を段階的に説明します。パッケージの内容、アンテナのセットアップ、電源接続オプション (PoE アダプタまたはスイッチ)、ソフトウェアの構成方法、LED ステータスのチェック、取り付けについて説明します。
前view Cudy AP3000 クイックインストールガイド
このガイドでは、Cudy AP3000 アクセス ポイントの簡単なインストール手順を説明し、電源オプションと構成方法を説明します。