Morimoto XB Evo Hybrid LED Headlights User Manual

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your Morimoto XB Evo Hybrid LED Headlights. These headlights are designed to enhance the lighting performance and aesthetic of your Toyota 4Runner (2014-2024) with advanced Bi-LED projectors, bright Daytime Running Lights (DRL), and amber LED turn signals. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.

Image 1.1: Toyota 4Runner equipped with Morimoto XB Evo Hybrid LED Headlights.

2. 安全情報

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury, damage to the product, or vehicle damage.

• 感電やショートを防ぐため、電気作業を始める前に車両のバッテリーを外してください。
• 安全メガネや手袋などの適切な個人用保護具を着用してください。
• パーキングブレーキをかけた状態で車両が水平な場所に駐車されていることを確認してください。
• Allow the vehicle's engine and any hot components to cool down before working.
• 取り付けプロセスのいずれかのステップについて不明な点がある場合は、資格のある自動車技術者にご相談ください。
• Do not modify the headlight assemblies or wiring harnesses, as this may void the warranty and compromise safety.

3. パッケージ内容

Verify that all components are present and undamaged before proceeding with installation. The package should contain the following items:

• Pair of Morimoto XB Evo Hybrid LED Headlight Assemblies (Left and Right)
• Plug and Play Wiring Harnesses (specific to vehicle's original headlight type)
• DRLハーネス
• DRL Harness Extension
• ヒューズタップ
• OE LED Harnesses (if applicable)
• OE Halogen Harnesses (if applicable)
• Resistors (if applicable)
• 9005 Connector Caps (if applicable)

Image 3.1: Morimoto XB Evo Hybrid LED Headlights and included wiring components.

画像3.2: 詳細 view of the various wiring harnesses and accessories.

4. セットアップとインストール

4.1.必要なツール

• ソケットレンチセット
• パネル取り外しツール
• ドライバー（プラスとマイナス）
• Wire Strippers/Crimpers (if custom wiring is needed, though typically plug-and-play)
• マルチメーター（接続テスト用）
• Zip Ties or Cable Management Clips

4.2. インストール前の手順

1. 車を平らで安定した場所に駐車し、パーキングブレーキをかけます。
2. エンジンをオフにして、キーをイグニッションから抜きます。
3. 車両のバッテリーのマイナス端子を外します。
4. Allow the engine bay to cool down completely.

4.3. Headlight Removal

1. Carefully remove any plastic clips, bolts, or screws securing the front bumper cover.
2. Gently pull the bumper cover away from the vehicle to access the headlight mounting bolts. It may not be necessary to fully remove the bumper, only to loosen it sufficiently.
3. Locate and remove the bolts securing the factory headlight assembly. Typically, there are bolts on the top, side, and sometimes underneath the headlight.
4. Carefully pull the factory headlight assembly forward, disconnecting all electrical connectors from the rear of the housing.
5. 反対側でもこのプロセスを繰り返します。

4.4. 配線接続

The Morimoto XB Evo Hybrid headlights feature a plug-and-play design. The specific harnesses used will depend on whether your 4Runner originally came with LED or Halogen headlights.

1. Identify Original Headlight Type: Determine if your vehicle originally had LED or Halogen headlights. Select the corresponding Morimoto wiring harness (OE LED Harnesses or OE Halogen Harnesses).
2. Connect Main Headlight Harness: Connect the appropriate Morimoto main headlight harness to the vehicle's factory headlight connector.
3. DRL Harness Connection: Connect the DRL Harness to the designated port on the new headlight assembly. Use the DRL Harness Extension if needed for proper routing.
4. Fuse Tap Installation: Install the provided Fuse Tap into an appropriate fuse slot in the vehicle's fuse box (refer to your vehicle's owner's manual for an accessory fuse location). Connect the DRL harness to the fuse tap. This provides power for the Daytime Running Lights.
5. Resistor Installation (if applicable): If your vehicle requires resistors to prevent hyper-flashing or bulb-out warnings (common with some halogen-to-LED conversions), securely mount the resistors to a metal surface away from plastic components, as they can generate heat. Connect them as per the included resistor instructions.
6. 9005 Connector Caps (if applicable): Use these caps to seal any unused connectors.
7. すべての接続がしっかりと固定されていることを確認してください。

4.5. ヘッドライトの取り付け

1. Carefully guide the new Morimoto XB Evo Hybrid LED Headlight assembly into the opening. Ensure all wiring is tucked away and not pinched.
2. Align the mounting points and secure the headlight assembly with the factory bolts removed earlier. Do not overtighten.
3. もう一方のヘッドライトについても繰り返します。
4. Reinstall the front bumper cover, ensuring all clips, bolts, and screws are reattached securely.

4.6. インストール後のチェック

1. 車両のバッテリーのマイナス端子を再接続します。
2. Turn on the vehicle's ignition and test all lighting functions: Daytime Running Lights, Low Beams, High Beams, and Turn Signals.
3. Verify that there are no dashboard warning lights related to the headlights.
4. Perform a headlight aiming adjustment. This is crucial for proper light distribution and to avoid blinding oncoming traffic. Consult your vehicle's service manual or a professional for correct aiming procedures.

5. 操作手順

Your Morimoto XB Evo Hybrid LED Headlights are designed to integrate seamlessly with your vehicle's existing lighting controls.

5.1. Daytime Running Lights (DRL)

The integrated white LED DRLs will illuminate automatically when the vehicle is running and the headlights are off, or as per your vehicle's DRL settings. These provide enhanced visibility during daylight hours.

Image 5.1: Headlights with DRLs active.

5.2. Low Beam

Activate the low beams using your vehicle's standard headlight switch. The Bi-LED projectors will provide a wide and bright light pattern for general night driving, compliant with DOT standards.

5.3.ハイビーム

Engage the high beams using your vehicle's standard high beam control. The Bi-LED projectors will switch to a more focused, intense beam pattern to illuminate further down the road.

5.4.方向指示器

The amber LED turn signals will activate with a fade-off effect when your vehicle's turn signal lever is engaged. Ensure they flash at the correct rate.

Image 5.2: Headlights with amber turn signals active.

6. メンテナンス

Proper maintenance ensures the longevity and optimal performance of your Morimoto XB Evo Hybrid LED Headlights.

6.1. 清掃

• Clean the headlight lenses regularly with a soft cloth and mild automotive soap or glass cleaner.
• Avoid abrasive cleaners or harsh chemicals, as these can damage the polycarbonate lens material.
• 石鹸の残留物を取り除くために水で十分に洗い流してください。

6.2. 検査

• Periodically inspect the headlight assemblies for any signs of damage, cracks, or moisture intrusion.
• Check all wiring connections to ensure they remain secure and free from corrosion.
• Verify that all lighting functions (DRL, low beam, high beam, turn signals) are operating correctly.

7。 トラブルシューティング

このセクションでは、ヘッドライトで発生する可能性のある一般的な問題について説明します。

8. 仕様

9. 保証とサポート

Morimoto stands behind the quality of the XB Evo Hybrid LED Headlights with an industry-leading XNUMX年間の保証. This warranty covers manufacturing defects and ensures the product performs as intended under normal use.

For warranty claims, technical assistance, or any questions regarding your Morimoto product, please contact Morimoto customer support through their official website or authorized dealers. When contacting support, please have your purchase information and product model number (LF2-531Y) available.