マニュアル+

VEDINDUST 202503220002

VEDINDUST HDMI Splitter Extender 4K30Hz 1 in 5 out User Manual

モデル: 202503220002

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of the VEDINDUST HDMI Splitter Extender 4K30Hz 1 in 5 out. This device allows for the simultaneous transmission of high-definition audio and video data from a single HDMI source to up to five HDMI displays. It supports transmission over Cat5e/6/7 network cables for extended distances and includes an HDMI loop-out port for local display.

2.製品オーバーview

2.1 主な特徴

  • HDMI Extender Splitter: 1 HDMI input to 4 RJ45 outputs (for receivers) and 1 HDMI loop-out.
  • 延長伝送: Transmits HDMI signals up to 50 meters (165 feet) over Cat6/7 cables to receivers. The HDMI loop-out supports up to 10 meters with a standard HDMI cable.
  • 4K30Hz HD Resolution: Supports video resolutions up to 4K@30Hz, 3D, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i.
  • オーディオサポート： Compatible with DTS-HD, LPCM7.1, DTS, DSD audio formats.
  • HDMI 1.4： Provides a transmission rate of 4.95Gbps for smooth and stable picture quality.
  • EDID管理： Automatic identification and locking of input source resolution, with support for copying EDID information from the main monitor.
  • Independent Power for Receivers: Each receiver has its own 5V power supply for stable long-distance signal transmission.
  • 簡単なインストール: Driver-free setup and wall-mountable design.

2.2 パッケージ内容

開梱したらパッケージの内容を確認し、すべてのアイテムが揃っていることを確認してください。

  • 1x HDMI Splitter Extender Transmitter
  • HDMIエクステンダーレシーバー4台
  • 5x DC12V Power Adapters
  • Fixed Brackets (for mounting)
  • ユーザーマニュアル x 1
Package contents of the VEDINDUST HDMI Splitter Extender, showing the transmitter, four receivers, five power adapters, fixed brackets, and user manual.

Image: Contents of the product package, including the main transmitter unit, four receiver units, five DC12V power adapters, mounting brackets, and the user manual.

3. セットアップ手順

HDMI スプリッター エクステンダー システムをセットアップするには、次の手順に従います。

  1. HDMIソースを接続します。 Connect your HDMI source device (e.g., laptop, PC, media player) to the "HDMI IN" port on the Transmitter using a high-quality HDMI cable.
  2. ローカルディスプレイを接続する（オプション）: If you wish to have a local display, connect an HDMI cable from the "HDMI OUT" (loop-out) port on the Transmitter to your local HDMI display.
  3. 受信機を接続する: Connect Cat5e/6/7 network cables from the "CAT1" through "CAT4" RJ45 output ports on the Transmitter to the "RJ45 CAT6/7 Input Port" on each of the four Receivers. Ensure the cables are wired using the 568B standard for optimal performance and distance.
  4. リモートディスプレイを接続する: Connect an HDMI cable from the "HDMI OUT" port on each Receiver to its respective remote HDMI display.
  5. 電源オン: Connect the provided DC12V power adapters to the "DC12V" input on the Transmitter and each of the four Receivers. Plug all power adapters into a power outlet.
  6. 接続を確認します。 Ensure all cables are securely connected. The LED indicators on both the Transmitter and Receivers should illuminate, indicating power and signal presence.
Wiring diagram for the VEDINDUST HDMI Splitter Extender, showing connections from a signal source to the transmitter, then via Cat5e/6/7 cables to four receivers, and finally to four HDMI output displays, plus an HDMI loop-out.

Image: A detailed wiring diagram illustrating how to connect the HDMI source, transmitter, Cat5e/6/7 cables, receivers, and multiple HDMI displays, including the HDMI loop-out connection.

詳細 view of the VEDINDUST HDMI Splitter Extender Transmitter and Receiver units, highlighting ports such as HDMI IN, HDMI OUT, RJ45 CAT6/7 ports, DC12V power, LED indicators, and EDID setting switches.

画像: クローズアップ view of the transmitter and receiver units, labeling all input/output ports, power connections, LED indicators, and the EDID setting switches on the transmitter.

4. 操作手順

4.1 電源オン/オフ

Use the "ON/OFF" switch on the Transmitter to power the unit on or off. Ensure all connected devices are also powered on.

4.2EDID管理

The EDID (Extended Display Identification Data) setting on the Transmitter allows you to manage the video and audio capabilities reported to the source device. This ensures compatibility and optimal display quality across all connected monitors.

  1. Locate the "EDID MODE" dip switches on the Transmitter. There are three switches (1, 2, 3).
  2. Refer to the EDID dial codes diagram below to select the desired resolution and audio format. "0" typically means the switch is in the downward position, and "1" means it's in the upward position.
  3. コピーモード: If you have multiple monitors with varying resolutions, it is recommended to use "Copy Mode". In this mode, the Transmitter will copy the EDID information from the monitor connected to the HDMI OUT1 port (the first remote display). For best results, connect the monitor with the 最低 resolution to HDMI OUT1 when using Copy Mode.
  4. After changing EDID settings, it may be necessary to restart the source device and/or the extender system for the changes to take effect.
Diagram showing 8 different EDID dial code settings for the VEDINDUST HDMI Splitter Extender, including 1080P_2CH, 1080P_5.1CH, 1080P_7.1CH, 4K30_2CH, 4K30_5.1CH, 4K30_7.1CH, 1920x1200, and Copy Mode, with switch positions indicated.

Image: EDID dial code settings, illustrating various resolution and audio configurations (e.g., 4K30_2CH, 1080P_5.1CH) and the corresponding switch positions (up/down) for switches 1, 2, and 3. Also shows the recommended practice for Copy Mode.

5. メンテナンス

  • クリーニング： デバイスの清掃には、柔らかく乾いた布をご使用ください。液体クリーナーやエアゾールクリーナーは使用しないでください。
  • 換気： 過熱を防ぐため、デバイスは必ず換気の良い場所に設置してください。通気口を塞がないでください。
  • ケーブル管理 Keep cables organized and free from kinks or excessive bending to prevent signal degradation.
  • 電源： Only use the provided DC12V power adapters. Using unauthorized power supplies may damage the device.

6。 トラブルシューティング

問題考えられる原因解決
画像は表示されません。
  • ケーブル接続が緩んでいます。
  • EDID設定が正しくありません。
  • 電源の問題。
  • 互換性のない解像度です。
  • Poor quality Cat cable.
  • Check all HDMI and Cat cables for secure connections.
  • Verify EDID settings match display capabilities. Try "Copy Mode" or a lower resolution.
  • Ensure all power adapters are connected and devices are powered on.
  • Adjust source resolution to match display.
  • Ensure Cat6/7 cable is used and wired to 568B standard.
画像がちらついたり不安定になる。
  • Long or low-quality Cat cable.
  • 干渉。
  • 電力変動。
  • Use high-quality Cat6/7 cables, especially for longer distances.
  • Ensure cables are not run near strong electrical interference sources.
  • Check power connections and consider a surge protector.
音声なし。
  • Incorrect EDID audio setting.
  • ソース/ディスプレイのオーディオ設定。
  • Adjust EDID settings to a compatible audio format (e.g., 2CH).
  • ソースデバイスのオーディオ出力設定とディスプレイの入力設定を確認してください。

7. 仕様

特徴詳細
モデル番号202503220002
入力ポート1x HDMI入力
出力ポート1x HDMI OUT (Loop), 4x RJ45 OUT
最大解像度4K@30Hz, 1080p, 3D
HDMIバージョンHDMI 1.4
伝送速度4.95Gbps
Transmission Distance (Cat Cable)Up to 50 meters (165 feet) over Cat5e/6/7
Transmission Distance (HDMI Loop Out)Up to 10 meters with standard HDMI cable
サポートされているオーディオ形式DTS-HD, LPCM7.1, DTS, DSD
電源DC12V (5 adapters included)
アイテム重量14.1 ounces (Transmitter + Receivers)
パッケージ寸法10.24 x 3.15 x 0.87インチ

8. 保証とサポート

For warranty information and technical support, please refer to the contact details provided with your purchase documentation or visit the official VEDINDUST webサイト。 保証請求に備えて購入時のレシートを保管しておいてください。