導入
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Dapper Supply Commercial Carpet Cleaner Extractor, Model DP-CCE1206. Please read this manual thoroughly before using the machine to ensure proper function and to prevent damage or injury.
安全に関する注意事項
- Always connect the machine to a properly grounded outlet.
- コードやプラグが損傷している状態で機械を操作しないでください。
- 手、足、ゆったりとした衣服を可動部分に近づけないでください。
- Do not use the machine to pick up flammable or combustible liquids.
- Ensure all switches are in the OFF position before plugging in or unplugging the machine.
- 使用していないときは、機械を乾燥した安全な場所に保管してください。
製品構成
Familiarize yourself with the main components of your Dapper Supply Commercial Carpet Cleaner Extractor.
図1: フロント view of the Dapper Supply Commercial Carpet Cleaner Extractor, showing the main body, cleaning head, and handle.
図2: 側 view of the extractor, highlighting the large wheels for mobility and the compact design.
図3: 後方 view showing the power cord, main power switch, and product label.
図4: Close-up of the recovery tank drain plug with chain, located at the lower rear of the unit.
図5: トップ view showing the transparent lid for the recovery tank and the fill port for the solution tank.
図6: Control panel on the handle with individual switches for Suction, Spray, and Roller functions.
図7: The debris collection area, designed to capture larger particles during cleaning.
図8: Power cord hook for organized storage and transport.
設定
- 開梱: Carefully remove the carpet extractor from its packaging. Inspect for any shipping damage.
- ポジショニング: 機械を平らで安定した場所に置いてください。
- 溶液タンクの充填： Open the solution tank cap (refer to Figure 5). Fill the 10-gallon solution tank with clean water and an appropriate carpet cleaning solution, following the solution manufacturer's instructions for dilution. Do not overfill.
- 電源接続: Ensure all switches (Suction, Spray, Roller) are in the OFF position (refer to Figure 6). Plug the 50-foot power cord into a grounded 110V electrical outlet.
操作手順
- プレクリーニング： Vacuum the carpet thoroughly to remove loose dirt and debris before using the extractor.
- マシンの起動： Turn on the main power switch. Then, activate the desired functions using the switches on the handle:
- 吸引: Activates the vacuum motor for water recovery.
- スプレー： Activates the pump for solution application.
- ローラー： Activates the brush roller for agitation.
- 洗浄プロセス：
- For deep cleaning, engage the Spray and Roller switches. Push the machine forward slowly, allowing the solution to penetrate the carpet fibers.
- For extraction, engage the Suction switch. Pull the machine backward over the treated area to remove the cleaning solution and dirt. Repeat as necessary until the water being extracted appears clean.
- Overlap each pass slightly to ensure even cleaning across the 18-inch cleaning path.
- 監視タンク: Periodically check the recovery tank (transparent lid, Figure 5) and the solution tank. Refill the solution tank as needed and empty the recovery tank when it reaches its maximum capacity.
- 仕上げ: Once cleaning is complete, turn off the Spray and Roller switches, then make a few final passes with only the Suction engaged to remove as much moisture as possible. Turn off the Suction switch, then the main power switch.
メンテナンス
- 回収タンクを空にする: After each use, or when full, drain the recovery tank using the drain plug (Figure 4). Rinse the tank with clean water.
- Cleaning Solution Tank: Empty any remaining solution from the solution tank and rinse thoroughly.
- Cleaning Debris Filter: Regularly check and clean the debris collection area/filter (Figure 7) to prevent blockages and maintain optimal suction.
- Brush Roller Inspection: Inspect the brush roller for tangled hair or debris. Clean as needed to ensure effective agitation.
- ホースとノズルのクリーニング： Flush the spray hose and nozzle with clean water after each use to prevent chemical buildup and clogging. A solution of water and white vinegar can be used for stubborn residue.
- 外装清掃: 機械の外側を広告で拭きますamp 布。
- ストレージ： Store the machine in a dry, climate-controlled area. Wrap the power cord neatly around the cord hooks (Figure 8).
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 機械の電源が入らない | プラグが差し込まれていない、電源スイッチがオフ、回路ブレーカーが落ちている。 | Ensure power cord is securely plugged into a grounded outlet; Turn main power switch ON; Check and reset circuit breaker. |
| ノズルから噴射されない | Solution tank empty; Spray switch off; Nozzle clogged; Pump malfunction. | Refill solution tank; Turn Spray switch ON; Clean nozzle; Contact customer support. |
| 吸引力が低い、または吸引力がない | Recovery tank full; Suction switch off; Debris filter clogged; Suction hose blocked. | Empty recovery tank; Turn Suction switch ON; Clean debris filter; Clear any blockages in the suction hose. |
| ブラシローラーが回転しない | Roller switch off; Debris tangled in brush; Motor malfunction. | Turn Roller switch ON; Remove tangled debris from brush; Contact customer support. |
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ダッパーサプライ |
| モデル名 | 業務用カーペットエクストラクター |
| モデル番号 | DP-CCE1206 |
| ソリューションタンク容量 | 10ガロン |
| 回収タンク容量 | 8ガロン |
| 掃除路幅 | 18インチ |
| モーター回転数 | 900 回転 |
| 力 | 1400W |
| 電源 | コード式電気 |
| 巻tage | 110V |
| 電源コードの長さ | 50フィート |
| 騒音レベル | 70デシベル |
| アイテム重量 | 83 ポンド |
| 製品寸法（奥行き×幅×高さ） | 奥行き34インチ x 幅16インチ x 高さ34インチ |
| 欧州連合 | 850064526301 |
保証とサポート
The Dapper Supply Commercial Carpet Extractor comes with a 1年間保証 from the date of purchase, covering manufacturing defects and workmanship under normal use.
For technical assistance, warranty claims, or to order replacement parts, please contact Dapper Supply customer support. Refer to the product packaging or the official Dapper Supply web現在の連絡先情報については、サイトをご覧ください。
When contacting support, please have your model number (DP-CCE1206) and proof of purchase readily available.
