1. はじめに
Thank you for choosing the RAINPOINT Solar Automatic Irrigation System. This system is designed to provide efficient and automated watering for your plants in gardens, balconies, and greenhouses, utilizing solar power for sustainable operation. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.
Key features of the RAINPOINT Solar Automatic Irrigation System: 2000mAh battery, 30-day super standby, IP65 waterproof, 121 timer modes, and 45L/H flow rate.
2. 安全情報
怪我やデバイスの損傷を防ぐために、次の安全ガイドラインを守ってください。
- Ensure all connections are secure before operating the system to prevent leaks.
- Do not submerge the main control unit in water. It is water-resistant, not submersible.
- 効率的な充電を確保するために、ソーラーパネルを清潔に保ってください。
- 自分でデバイスを分解したり修理したりしないでください。 サポートが必要な場合は、カスタマー サポートにお問い合わせください。
- Position the water source (bucket/reservoir) below or at the same level as the pump for optimal performance. The pump has a 3-meter lift height.
- Protect tubing from sharp objects or excessive tension to avoid damage.
3. 箱の中身
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
詳細 view of all included components for the RAINPOINT Solar Automatic Irrigation System.
- 1 x Solar Water Pump (with integrated solar panel)
- 1×グランドステーク
- 1 x Main Tube (Ø4 mm x 15 m)
- 1 x Branch Tube (Ø3 mm x 5 m)
- フィルター x 1
- 3 x Tube End Caps
- 15 x Micro Drippers
- 15 xTコネクタ
- クロスコネクタ x 1
- 1 x Anti-siphon Valve
- 2 x Screws (for wall mounting option)
- 10 xケーブルタイ
4. セットアップ手順
- 水源を準備する: Place a water reservoir (e.g., a bucket or tank) in a suitable location. Ensure it is filled with water.
- Position the Solar Pump:
- Attach the ground stake to the solar pump unit.
- Insert the stake into the ground near your plants, ensuring the solar panel faces direct sunlight for maximum charging efficiency.
- Alternatively, use the provided screws to mount the pump unit on a wall or fence.
The solar panel charges the internal battery even on cloudy days, providing up to 30 days of standby power.
- Connect the Filter and Main Tube:
- Connect one end of the main tube (Ø4 mm) to the pump's water outlet.
- Attach the filter to the other end of the main tube and place the filter into your water reservoir. Ensure the filter is fully submerged.
- Install the Anti-siphon Valve:
Insert the anti-siphon valve into the main tube at a point higher than the water level in your reservoir. This prevents water from continuously siphoning out of the reservoir.
The anti-siphon valve prevents accidental over-watering and backflow.
- Distribute Tubing and Drippers:
- Lay out the main tube to reach your plants.
- Cut the main tube at desired points and insert T-connectors.
- Connect the branch tube (Ø3 mm) to the T-connectors and run it to individual plants.
- Insert a micro dripper into the end of each branch tube and place it near the base of the plant.
- Use the cross connector for parallel irrigation to ensure uniform distribution to up to 15 pots.
RAINPOINT's cross connector enables parallel irrigation for uniform water distribution to multiple plants.
- 安全なチューブ: Use the provided cable ties to secure the tubing and prevent kinks or dislodgement.
- Seal Unused Ends: Use the tube end caps to seal any unused branch tube ends.
5. 操作手順
The RAINPOINT system features dual knob control for easy programming.
The control unit with dual knobs for setting watering duration and frequency.
- 散水時間の設定:
使用 "どのぐらいの間" knob to select the desired watering duration per cycle. Options range from 10 seconds to 20 minutes.
- 水やり頻度の設定:
使用 "どのくらいの頻度で" knob to select how frequently the system waters. Options range from every 8 hours to every 30 days.
- 手動散水：
Press the central button for instant manual watering. The system will water for the duration set by the "HOW LONG" knob, then resume the programmed cycle.
- 121つのタイマーモード:
The combination of duration and frequency settings provides 121 different watering options, allowing you to customize watering schedules for various plant types and environmental conditions.
Example watering schedules for indoor and outdoor plants, demonstrating the flexibility of the 121 timer configurations.
6. メンテナンス
- フィルターを掃除する: 詰まりを防ぎ、水の流れを一定に保つために、定期的に水フィルターを点検し、清掃してください。
- 水位の監視: Ensure your water reservoir always has sufficient water. The system features an LED alarm that indicates low water levels.
- クリーンソーラーパネル: ソーラーパネルを定期的に柔らかくて乾いた布で拭いてください。amp cloth to remove dust and debris, ensuring optimal charging.
- Check Tubing and Drippers: Inspect all tubing and drippers for blockages, kinks, or damage. Clean drippers if they become clogged.
- 冬の保管： In freezing conditions, drain all water from the system and store the pump and tubing indoors to prevent frost damage.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 水の流れがない |
|
|
| 不均一な水の分配 |
|
|
| システムが充電されない |
|
|
| Water siphoning continuously |
|
|
8. 仕様
| モデル番号 | ITP138-EU |
| 電源 | 太陽エネルギー |
| ソーラーパネル | 1.5 W Monocrystalline Silicon |
| バッテリー | 2000 mAh Rechargeable Lithium-Ion |
| 待機時間 | 最長30日間 |
| 流量 | 最大45L/時 |
| Pump Lift Height | 3メートル |
| Watering Duration Settings | 10秒～20分 |
| Watering Frequency Settings | 8 hours - 30 days |
| Max Number of Pots | 15 (with provided accessories) |
| Main Tube Length | 15 meters (Ø4 mm) |
| Branch Tube Length | 5 meters (Ø3 mm) |
| 材料 | プラスチック、ゴム |
| 製品寸法 | 20.3 x 18 x 12 cm |
| 製品重量 | 970グラム |
9.保証とサポート
RAINPOINT products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your Solar Automatic Irrigation System, please contact RAINPOINT customer service through the retailer where you purchased the product or visit the official RAINPOINT webサイト。
保証請求のために購入証明書を保管してください。
