KMF-1 ギターマルチエフェクトペダル ユーザーマニュアル

1. はじめに

Welcome to the user manual for the Flatsons KMF-1 Guitar Multi-Effects Pedal. This manual provides comprehensive instructions for setting up, operating, and maintaining your device. The KMF-1 is designed to offer a wide range of guitar effects and features, enhancing your musical creativity.

2. 安全情報

• Use only the specified power adapter (DC 9V 500mA) or 6 AA batteries.
• ユニットを水や過度の湿気にさらさないでください。
• 極端な温度や直射日光を避けてください。
• ユニットを分解したり改造したりしないでください。修理は必ず資格のある専門家にご依頼ください。
• お子様の手の届かない場所に保管してください。

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認してください。

• KMF-1 Guitar Multi-Effects Pedal
• DC 9V Power Adapter (if included, otherwise mention batteries)
• ユーザーマニュアル（このドキュメント）
• USB Cable (for computer connection)

4.製品オーバーview

4.1. コントロールと接続

The KMF-1 features an intuitive layout for easy operation.

図1: 前面 view of the KMF-1 pedal, highlighting the main unit with control knobs, buttons, LCD screen, and the integrated expression pedal.

図2：詳細 view of the KMF-1's 128x32 LCD color screen, providing real-time feedback on effects and settings.

Figure 3: Rear panel connections of the KMF-1, including AUX IN for external audio, INPUT for guitar, OUTPUT/HEADPHONE for audio output, USB for computer connection, and DC 9V 500mA power input.

4.1.1. フロントパネルコントロール

• MEMORY/STOMP/EDIT Button: Toggles between Memory Mode (preset selection), Stomp Mode (individual effect block control), and Edit Mode (parameter adjustment).
• ノブ1〜4： Multi-functional knobs for adjusting parameters, navigating menus, and selecting presets.
• ボタン1〜5： Used for selecting effect blocks in Stomp Mode or navigating presets in Memory Mode.
• ドラムボタン: Activates and controls the built-in drum rhythms.
• ルーパーボタン: Activates and controls the 30-second looper function.
• REC/PLAY ON/OFF Footswitch: Controls recording and playback for the looper, and turns the unit on/off.
• TUNER/SELECT Footswitch: Activates the built-in tuner and selects options.
• STOP Footswitch: Stops looper playback or drum rhythm.
• エクスプレッションペダル: A 2-in-1 pedal that can be assigned to control various effects like Wah, Volume, or other parameters.

4.1.2.リアパネルの接続

• AUX入力： スマートフォンや MP3 プレーヤーなどの外部オーディオ デバイスを接続するための 3.5 mm 入力。
• 入力： ギターを接続するための 1/4 インチ入力。
• OUTPUT/HEADPHONE: 1/4インチ出力で接続 ampミキサー、ヘッドフォンなど。
• USB： USB port for connecting to a computer for software updates or advanced editing.
• DC 9V 500mA: Power input jack for the included DC 9V adapter.

5. セットアップ

5.1. ユニットの電源供給

The KMF-1 can be powered in two ways:

1. DC 9Vアダプター: Connect the included DC 9V 500mA power adapter to the "DC 9V 500mA" jack on the rear panel and plug it into a standard wall outlet.
2. 単三電池： Open the battery compartment (located on the underside of the unit) and insert 6 AA batteries. The unit can operate for up to 2.5 hours on batteries.

5.2. 機器の接続

1. ギターをに接続します 入力 標準の 1/4 インチ楽器ケーブルを使用してジャックに接続します。
2. 接続する OUTPUT/HEADPHONE あなたのジャックに amplifier, mixer, or headphones using a 1/4-inch cable.
3. (Optional) To play along with backing tracks, connect your smartphone or other audio device to the AUX IN 3.5mmオーディオケーブルを使用してジャックに接続します。
4. (Optional) For advanced editing or firmware updates, connect the USB port to your computer using a USB cable.

6. 操作手順

6.1. 基本操作

電源を入れるには、 REC/PLAY ON/OFF footswitch. The LCD screen will illuminate.

6.2. 動作モード

The KMF-1 features three primary modes, accessible via the メモリ/ストンプ/編集 ボタン：

6.2.1.メモリモード

In Memory Mode, you can select from 50 preset patches. Use the footswitches or knobs to navigate through the presets. This mode is ideal for quick tone changes during live performances.

6.2.2. ストンプモード

Stomp Mode replicates the functionality of individual stompbox pedals. It allows you to flexibly enable and sequence 5 independent effect blocks. Use the numbered buttons (1-5) to toggle individual effects on or off within the current patch.

6.2.3. 編集モード

Edit Mode provides advanced control over each effect parameter. Press the メモリ/ストンプ/編集 button until "EDIT" is displayed. Use the knobs to fine-tune parameters such as gain, tone, modulation depth, delay time, and reverb decay.

6.3. Using the Expression Pedal

The 2-in-1 expression pedal can be assigned to control various effects. In Edit Mode, you can assign the expression pedal to control parameters like Wah, Volume, or other effects for dynamic real-time adjustments.

Figure 4: The assignable expression pedal, offering dynamic control over various effects and parameters.

6.4. Built-in Tuner

To activate the tuner, press the TUNER/SELECT footswitch. The display will show the note being played, allowing you to accurately tune your guitar. Press the footswitch again to exit tuner mode.

6.5. Drum Rhythms and Looper

The KMF-1 includes 42 drum rhythms and a 30-second looper.

• ドラムリズム: を押す ドラム button to activate the drum machine. Use the knobs to select from the available rhythms and adjust tempo and volume.
• ルーパー: を押す ルーパー button to engage the looper. Use the REC/PLAY ON/OFF footswitch to record, play, and overdub loops. The looper has a maximum recording time of 30 seconds. Press the 停止 再生を停止するにはフットスイッチを使用します。

Figure 5: Visual representation of the KMF-1's integrated drum rhythms and 30-second looper functionality.

7. Effects and Features

The KMF-1 utilizes advanced DSP technology with TSAC for precise analog circuit simulation, offering 77 classic effects across 8 essential effect modules.

• エフェクトモジュール: Amplifier, Cabinet, Drive, Modulation, Delay, Dynamics, Reverb, and Filter.
• Amp Models & Cabinet Simulators: 特徴 18 amp models and 18 cabinet simulators.
• IR Sampリン： Incorporates 512-point IR Sampling to mimic different cabinet sounds, ensuring clear and dynamic sound with 32-bit signal processing.

Figure 6: Explanation of TSAC Technology and 32-bit Signal Processing, highlighting high-fidelity reproduction, realistic dynamic response, and low latency.

Figure 7: Illustration of the 512-point IR Sampling Resolution, emphasizing its ability to capture every detail of cabinet sounds.

Figure 8: The KMF-1's capability to simulate 18 different amplifiers and cabinets, powered by advanced algorithms and IR technology.

図9：以上view of the KMF-1's extensive effects library, including 77 classic effects, 50 preset patches, and 5 flexible effect modules.

7.1. Important Note on Cabinet Simulation

When using studio monitors, headphones, or powered speakers without a real cabinet, ensure the cab module is enabled. If you are using a real guitar cabinet or amplifier (e.g., tube amp, digital guitar amp), you should disable the cab simulation module to prevent unnatural sound layering and harsh noise caused by double cabinet simulation.

8. メンテナンス

• 本体は柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
• Store the unit in a dry environment away from direct sunlight and extreme temperatures.
• 長期間使用しない場合は、液漏れを防ぐために電池を取り外してください。

9。 トラブルシューティング

If you encounter issues not listed here, please contact Flatsons customer service.

10. 仕様

11. 保証とサポート

Flatsons is committed to your satisfaction.

• 12-Month Product Guarantee: Your KMF-1 pedal is covered by a 12-month product guarantee from the date of purchase.
• 専門家によるテクニカルサポート: Enjoy lifelong expert technical support for as long as you own the product.
• 30-Day Easy Return Policy: Products purchased through Amazon are subject to a 30-day easy return policy.
• 24時間年中無休のカスタマーサービス: For any issues, parts damage, or product usability concerns, please reach out to our customer service team anytime.

For support, please visit the Flatsons store on Amazon or contact us directly.