重要な安全情報
本製品を組み立て、ご使用になる前に、すべての指示と安全に関する警告をよくお読みになり、理解してください。指示に従わない場合、怪我や製品の損傷につながる可能性があります。
- Do not attempt to lift or move the box spring when it is fully assembled.
- 不安定さや崩壊を防ぐために、必ず組み立て手順に従ってください。
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- 最大耐荷重 3500 ポンドを超えないようにしてください。
パッケージ内容
組み立てを始める前に、すべてのコンポーネントが揃っていることを確認してください。
- Box Spring Frame Components
- 生地カバー
- インストールマニュアル
- ネジ
- レンチ
セットアップと組み立て
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
必要なツール:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
組み立て手順:
- コンポーネントを解凍します: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- フレームを展開する: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- 安全な接続: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- スラットの取り付け: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- 布カバーを適用する: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
操作手順
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- 配置: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- マットレスの配置: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- 重量容量: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- ノイズ低減: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
メンテナンスとケア
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- カバーのクリーニング: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- フレームのクリーニング: 金属フレームは乾いた布で拭いて、ほこりやゴミを取り除いてください。刺激の強い化学薬品や研磨剤入りの洗剤の使用は避けてください。
- 定期点検: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
トラブルシューティング
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| きしむ音 | 接続が緩んでいるか、配置が不均一です。 | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| 不安定さ/ぐらつき | 組み立てが不完全、またはコンポーネントが破損している。 | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Mattress Sagging | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | マレーシア航空 |
| モデル番号 | MAF-MT33-10K |
| サイズ | 王 |
| 製品寸法 | 長さ78.8インチ x 幅75.5インチ x 高さ10インチ |
| 対応マットレスサイズ | 長さ80インチ x 幅76インチ |
| 特集 | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| 仕上げタイプ | 粉体塗装 |
| 含まれるコンポーネント | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| 製品のお手入れ方法 | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| 組み立てが必要 | はい |
| 地面からアイテムまでの距離 | 10インチ |
| アイテム重量 | 49.1ポンド |
| 最大重量容量 | 3500ポンド |
Figure 5: MAF Box Spring Size Chart.
保証とサポート
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
