1. はじめに
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP Freelift Pro Dual Monitor Mount. Please read this guide thoroughly before installation to ensure correct setup and safe usage. This monitor mount is designed to enhance your workspace ergonomics and free up desk space by securely holding two monitors.
2. 安全情報
- 組み立て前に、すべての部品が揃っていて損傷がないことを確認してください。部品が不足しているか不良品がある場合は使用しないでください。
- Follow all assembly steps carefully. Incorrect installation may result in product damage or personal injury.
- 片腕あたりの最大重量容量 22 ポンド (10 kg) を超えないようにしてください。
- デスクの表面が安定しており、マウントとモニターの合計重量を支えるのに十分な強度があることを確認してください。
- Do not install on tempered glass table tops.
- 設置中は子供やペットを近づけないでください。
3. パッケージ内容
以下にリストされているすべての部品がパッケージに含まれていることを確認してください。
- Main Pole and Base
- Dual Gas Spring Arms
- VESAプレート（2枚）
- C-Clamp 組み立て
- グロメットベースアセンブリ
- ハードウェアキット（ネジ、ワッシャー、スペーサー）
- 六角レンチ（各種サイズ）
- ケーブル管理クリップ
Refer to the 'Package List' section in the installation video for a visual guide to all included components.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates the unboxing and initial setup steps, including a visual overview すべての部品の。
4. セットアップ
4.1 Choose Mounting Type
The MOUNTUP Freelift Pro offers two installation options: C-Clamp or Grommet Mount. Select the method best suited for your desk.
- C-Clamp マウント： For desk thickness within 0.39''-2.76''.
- グロメットマウント: For desk thickness within 0.39''-2.76'' and hole diameter within 0.39''-2.36''.
Image: Two Installation Options - Illustrates the C-clamp and grommet mounting methods with desk thickness and hole diameter specifications.
4.2 Base Installation (C-Clamp またはグロメット）
Follow the instructions in the video for your chosen mounting type:
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates both C-clamp and grommet base installation steps from 0:03 to 0:34.
4.3 Arm Installation
Attach the gas spring arms to the installed base as shown in the video.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates arm installation from 0:35 to 0:45.
4.4 VESA プレートをモニターに取り付ける
Secure the VESA plate to the back of your monitor using the provided screws. Ensure the plate is firmly attached.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates attaching the VESA plate to the monitor from 0:46 to 0:51.
4.5 Slide Monitor onto Arm
Carefully slide the monitor (with attached VESA plate) onto the arm's mounting head until it clicks into place. Secure it with the locking knob.
Image: Quick Release VESA Plate - Shows the quick-release VESA plate mechanism for easy monitor attachment and removal.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates sliding the monitor onto the arm from 0:52 to 0:56.
5. 操作手順
5.1 モニターの位置を調整する
The Freelift Pro Dual Monitor Mount offers full motion adjustment for optimal view快適さ：
- +85° から -45°
- スイベル: 180° (at VESA plate), 360° (at arm joint), 270° (at base joint)
- 回転： 360°（縦向きから横向き）
- 高さ調整: Max height up to 17.3 inches (from desk surface)
- 拡大： Each arm extends up to 21 inches
Image: Freely Position Your Screen - Highlights the maximum height and extension capabilities of the monitor arms.
Image: Optimize Your View - Demonstrates the swivel, height, tilt, and rotation ranges for flexible monitor positioning.
Image: Full Motion Adjustment - Details the extensive swivel capabilities at different points of the monitor arm.
Video: Freelift Pro Dual Monitor Arm Function - Demonstrates the full range of motion, including tilt, swivel, and rotation.
5.2 ガススプリングの張力調整
The gas spring tension may need adjustment depending on your monitor's weight. Use the provided Allen key to adjust the tension screw located on the arm.
- To reduce tension (for lighter monitors or if arms are too stiff): Turn the screw clockwise (towards '-').
- To increase tension (for heavier monitors or if arms are falling down): Turn the screw counter-clockwise (towards '+').
Each turn needs to be a full 360 degrees. Hold the arm in a horizontal position during adjustment.
Image: Gas Spring Adjust - Provides a visual guide for adjusting gas spring tension and tilt.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates resetting spring tension from 1:06 to 1:11.
6.ケーブル管理
Route your monitor cables through the integrated cable management channels on the arms to maintain a tidy workspace.
Image: Organize Wires and Tools - Shows how to manage cables and store Allen keys within the arm for convenience.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates cable management from 0:57 to 1:02.
7. メンテナンス
- すべてのネジと接続部がしっかりと固定されているか定期的に確認してください。
- Clean the monitor mount with a soft, damp 布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
- Periodically re-adjust gas spring tension if monitors feel too loose or too stiff over time.
8。 トラブルシューティング
If you encounter any issues with your monitor mount, refer to the common problems and solutions below:
8.1 Arms Falling Down / Can't Rise Up
This indicates that the gas spring tension is too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise ('+') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.2 Arms Rising Up / Can't Fall Down
This indicates that the gas spring tension is too high for your monitor's weight. Decrease the tension by turning the adjustment screw clockwise ('-') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.3 Monitors Face Down / Can't Be Adjusted Tilt
The tilting bolt may be too tight. Loosen the tilting bolt (towards '-') with an Allen key, adjust the monitor to your desired angle, then retighten the bolt (towards '+') to fix the angle.
8.4 Swivels Left and Right is Loose / Monitor Can't Swivel
Adjust the tightness of the swivel screw using an Allen key. Tighten or loosen as needed to achieve the desired swivel resistance.
Video: Freelift Pro Dual Monitor arm trouble shooting - This video provides visual guidance for adjusting tension, tilt, and swivel to resolve common issues.
9. 仕様
| 特徴 | 仕様 |
|---|---|
| 対応モニターサイズ | 22" - 32" (flat or curved LCD) |
| 耐荷重（片腕あたり） | 4.4 - 22ポンド（2 - 10 kg） |
| VESA互換性 | 75x75mm、100x100mm |
| 傾斜範囲 | +85° から -45° |
| スイベル範囲 | 180° (at VESA plate), 360° (at arm joint), 270° (at base joint) |
| 回転 | 360° |
| 最大高さ（机から） | 17.3インチ |
| Max Extension (per arm) | 21インチ |
| 取り付けオプション | C-Clamp、グロメット |
| C-Clamp 机の厚さ | 0.39インチ - 2.76インチ |
| グロメットデスクの厚さ | 0.39インチ - 2.76インチ |
| グロメット穴径 | 0.39インチ - 2.36インチ |
| 材料 | 合金鋼 |
Image: Perfect For Your Screen - Overview of product compatibility including load capacity, screen size, and VESA patterns.
10. 保証とサポート
For warranty information or technical support, please refer to the product packaging or contact MOUNTUP customer service directly. Keep your purchase receipt for warranty claims.
