1. はじめに
This manual provides essential information for the proper installation, operation, and maintenance of your Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange. Please read these instructions carefully before beginning installation to ensure safe and correct setup. This product is designed to seamlessly integrate with other components of the Brizo Kintsu collection.
2.製品オーバーview
The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange is a precision-engineered component designed to extend from your ceiling to connect with a compatible dual waterway raincan shower head. Its robust brass construction ensures durability and reliability in a bathroom environment.
Figure 1: The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange, shown in polished chrome finish. This component connects the shower head to the ceiling water supply.
3. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm
- 丸フランジ
Note: A dual waterway raincan shower head (e.g., Brizo 81406 or 81406-2.5) and a dual waterway ceiling mount shower arm rough-in (e.g., Brizo R83992) are ない 含まれておりませんので別途ご購入ください。
4. 仕様
| 属性 | 仕様 |
|---|---|
| モデル番号 | 83992-06MF |
| 長さ | 6 inches (measurement of longest side) |
| フランジ径 | 3-1/4インチ |
| 材料 | 真鍮 |
| 仕上げる | Chrome (as shown, other finishes may vary) |
| 互換性 | Requires dual waterway raincan head (81406 or 81406-2.5) and dual waterway ceiling mount shower arm rough-in (R83992) |
5. インストール
Professional installation is highly recommended. Ensure all local plumbing codes are followed.
5.1 始める前に
- Turn off the main water supply to the area where the shower arm will be installed.
- Ensure you have the necessary tools (e.g., pipe wrench, thread sealant, measuring tape).
- Confirm that the dual waterway ceiling mount shower arm rough-in (e.g., Brizo R83992) is already properly installed and secured in the ceiling.
5.2 インストール手順
- スレッドを準備する: Apply thread sealant or Teflon tape to the male threads of the shower arm that will connect to the rough-in valve in the ceiling.
- Attach Flange: Slide the round flange onto the shower arm, ensuring the finished side faces towards the ceiling.
- Connect to Rough-in: Carefully thread the shower arm into the ceiling rough-in connection. Hand-tighten first, then use a pipe wrench to tighten securely, ensuring the arm is oriented correctly. Do not overtighten.
- ポジションフランジ: Slide the flange up against the ceiling, covering the rough-in opening.
- Install Shower Head: Apply thread sealant or Teflon tape to the male threads at the bottom of the shower arm. Thread your compatible dual waterway raincan shower head onto the shower arm. Hand-tighten, then use a wrench if necessary, being careful not to damage the finish.
- 漏れのテスト: Slowly turn the main water supply back on and check all connections for leaks. Tighten any leaking connections as needed.
6. 操作
The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm functions as a conduit for water flow from your ceiling rough-in to your dual waterway raincan shower head. Once installed, its operation is dependent on the functionality of your shower valve and the connected shower head. Ensure your shower head is properly attached to experience the intended dual waterway functionality.
7. お手入れとメンテナンス
To maintain the finish and performance of your Brizo Kintsu shower arm, follow these guidelines:
- クリーニング： 柔らかくて乾いた布で拭き取ってください。amp 布で拭いてください。頑固な汚れには、中性洗剤と水を薄めた溶液をご使用ください。水滴が残らないよう、よくすすいだ後、柔らかい布ですぐに乾かしてください。
- 刺激の強い洗剤は避けてください: 研磨剤入り洗剤、たわし、アンモニア系洗剤、漂白剤、酸、アルコールを含む洗剤は使用しないでください。仕上げを傷める可能性があります。
- 定期点検: Periodically check the connection points for any signs of leaks or corrosion. Address any issues promptly.
8。 トラブルシューティング
While the shower arm itself is a passive component, issues can sometimes arise from its connections.
8.1 接続部の漏れ
- 原因： Insufficient thread sealant, loose connection, or damaged threads.
- 解決： Turn off water supply. Disconnect the leaking component (either from the ceiling rough-in or the shower head). Clean old thread sealant. Reapply fresh thread sealant or Teflon tape generously. Re-tighten securely, ensuring not to overtighten.
8.2 水の流れの減少
- 原因： Blockage in the shower head or rough-in, or issues with the main water supply.
- 解決： This is unlikely to be caused by the shower arm itself unless it is physically damaged or obstructed. Check the shower head for mineral buildup or debris. Consult the manual for your shower head or rough-in valve for troubleshooting water flow issues.
9. 保証とサポート
The Brizo Kintsu 6-inch Dual Waterway Ceiling Mount Shower Arm and Flange is covered under Brizo's limited lifetime warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Brizo warranty documentation or visit the Brizo webサイト。
For technical assistance, replacement parts, or warranty claims, please contact Brizo Customer Service:
- Webサイト： www.brizo.com
- 電話： Refer to the Brizo web地域の連絡先番号のサイト。
When contacting support, please have your product model number (83992-06MF) and date of purchase readily available.
