1.製品オーバーview
The YESPER Armor 3000A Jump Starter is a portable device designed to jump-start 12V vehicles with up to 10L gas or 8L diesel engines. It features a 20000mAh battery capacity, 100W two-way fast charging, an LED display for real-time monitoring, and multiple safety protections. Beyond jump-starting, it functions as a power bank for various electronic devices and includes a 400-lumen LED light.
Image 1.1: The YESPER Armor 3000A Jump Starter, showing the main unit, jumper cables, and charging cables.
2. 箱の中身
開梱時にすべてのコンポーネントが揃っていることを確認します。
- 1 x YESPER Armor 3000A Jump Starter (20000mAh)
- 1 x Jumper Cable with Smart Clamps
- 1 x 100Wカーチャージャー
- 1 x 60W USB-C to C Cable
- シガーライターソケットアダプター x 1
- ユーザーマニュアル x 1
Image 2.1: All items included in the YESPER Armor 3000A Jump Starter package.
3. セットアップと充電
3.1 初期充電
Before first use, fully charge the YESPER Armor Jump Starter. The device supports 100W two-way fast charging via its Type-C port. A full charge from 0% to 100% can be achieved in approximately 45 minutes using the included 100W car charger and USB-C to C cable.
Image 3.1: The jump starter being charged via its Type-C port, illustrating the 100W fast charging capability.
Video 3.1: Demonstration of the 100W fast charging feature of the YESPER Armor Jump Starter.
3.2 デバイスコンポーネント
Familiarize yourself with the device's buttons, ports, and display:
Image 3.2: Labeled diagram showing the Power Button, BOOST Button, Jumper Cable Socket, DC Out Port, USB Out Ports, Display Screen, and LED Light.
- 電源ボタン: Turns the device on/off and cycles through LED light modes.
- ブーストボタン： Used for jump-starting completely dead batteries.
- Jumper Cable Socket: Connects the smart jumper cables.
- DC出力ポート: Provides 15V output for compatible devices like tire inflators.
- 5V/2.4A USB Out Port: デバイスを充電するための標準 USB 出力。
- QC3.0 USB Out Port: Quick Charge 3.0 compatible USB output.
- PD100W USB-C In/Out Port: For 100W fast charging input and output.
- 表示画面: バッテリーの割合を表示しますtage, charge/discharge power, and status indicators.
- LEDライト: Provides illumination with steady, strobe, and SOS modes.
4. 操作手順
4.1 車のジャンプスタート
車両を安全にジャンプスタートするには、次の手順に従ってください。
- ジャンパーケーブルを接続します。 Insert the smart jumper cable plug into the jump starter's socket.
- Clを添付amps: 接続する 赤（+） clamp to the vehicle's positive battery terminal and the 黒 （-） clamp to the vehicle's negative battery terminal. Ensure a secure connection.
- 表示を確認する: Turn on the jump starter. The display should show "READY" if the connections are correct and the battery has sufficient charge.
- 開始車両: Attempt to start your vehicle. If it doesn't start immediately, wait 30 seconds before trying again.
- Clを削除しますamps: Once the vehicle starts, immediately remove the black clamp まず、赤いclamp最後に、ジャンプスターターからジャンパーケーブルを外します。
Image 4.1: The YESPER Armor Jump Starter connected to a car battery, ready for jump-starting.
Video 4.1: Step-by-step guide on how to jump start a car using the YESPER Armor Jump Starter.
4.2 Boost Start Mode (for completely dead batteries)
If your vehicle's battery is completely dead and the jump starter does not show "READY", use the Boost Start Mode:
- Follow steps 1 and 2 from "Jump Starting a Vehicle" above.
- を押し続けます ブースト button on the jump starter until the display shows "READY".
- Attempt to start your vehicle within 30 seconds.
- Once the vehicle starts, immediately remove the black clamp まず、赤いclamp最後に、ジャンプスターターからジャンパーケーブルを外します。
4.3 パワーバンクとして使用する
The YESPER Armor can charge various electronic devices:
- USB-Cポート： Use the PD100W USB-C port for fast charging compatible smartphones, tablets, and laptops.
- QC3.0 USBポート: For quick charging devices that support QC3.0.
- 5V/2.4A USBポート: For standard charging of USB-powered devices.
- DC15V出力: Connect the cigarette lighter socket adapter to the DC Out Port to power 15V/12V DC devices such as tire inflators or car vacuums.
4.4 LEDライトの機能
Press the Power Button to cycle through the LED light modes:
- 安定した照明: 一般照明用。
- ストロボ： 合図を送ったり、注意を引いたりするため。
- SOS： 緊急信号用。
Image 4.2: The jump starter's 400-lumen LED light being used to illuminate an engine bay.
5. メンテナンス
To ensure the longevity and optimal performance of your YESPER Armor Jump Starter:
- ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- 充電中: For optimal performance, recharge the jump starter every 6 months, even if not in use. The device can hold a full charge for up to 24 months under moderate storage conditions.
- クリーニング： 柔らかく乾いた布でデバイスを拭いてください。刺激の強い化学薬品や研磨剤は使用しないでください。
- 安全性： The device is housed in an IP65-rated rugged case, making it waterproof, dustproof, and drop-proof. However, avoid intentional submersion or severe impacts.
Image 5.1: The jump starter highlighting its 24-month standby capability and low-power technology.
6。 トラブルシューティング
The 3.2-inch LED display provides important status indicators to assist with troubleshooting:
Image 6.1: The jump starter's display showing battery percentage、ワットtage, and status icons like 'READY', 'Low Voltage', 'Misconnection Prevention', and 'Battery Low Temperature Reminder'.
- "READY" not displayed: clを確認してくださいamps are correctly attached to the battery terminals. If the vehicle battery is completely dead, use the Boost Start Mode.
- 低ボリュームtageインジケーター： If the jump starter's battery is low, recharge it. For immediate jump-starting with low voltage, the Boost function may be necessary.
- Misconnection Prevention Indicator: This indicates incorrect clamp connection (e.g., reverse polarity). Disconnect and re-attach clamps correctly. The smart clamps have 10 built-in protections to prevent sparks and misoperation.
- Battery Low Temperature Reminder: In extremely cold conditions, the jump starter may indicate low temperature. Allow the device to warm up slightly before use for optimal performance.
- デバイスの電源が入らない: Ensure the power button is pressed firmly. If the battery is completely drained, charge the device.
ここに記載されていない問題が発生した場合は、保証とサポートのセクションを参照してください。
7. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | イエスパー |
| モデル | 鎧 |
| ピーク出力電流 | 3000 Amps |
| バッテリー容量 | 20000mAh |
| エンジンの互換性 | 最大10Lガソリン/8Lディーゼル |
| 充電入力/出力 | 100W Two-Way Type-C |
| USB出力ポート | QC3.0, 5V/2.4A |
| DC出力ポート | 15V (compatible with 15V/12V devices) |
| LEDライトの明るさ | 400ルーメン |
| 安全保護 | 10 built-in protections (short circuit, over current, over charge, over discharge, over voltage, over temperature, reverse charge, reverse connection, AI software, low power consumption) |
| 防水等級 | IP65 |
| 製品寸法 | 奥行き2.08インチ x 幅4.13インチ x 高さ9.37インチ |
| アイテム重量 | 1.98 ポンド |
| 電池のタイプ | リチウムポリマー |
8. 保証とサポート
8.1 製品の信頼性
The YESPER Armor Jump Starter is designed for reliability, maintaining a full charge for up to 24 months under normal storage conditions. Its smart auto-shutoff feature helps preserve power.
Image 8.1: The jump starter emphasizing its 10 built-in safety protections for user and device safety.
8.2 カスタマーサポート
For any questions, concerns, or technical assistance regarding your YESPER Armor Jump Starter, please contact our customer support team. Refer to the contact information provided in your product packaging or visit the official YESPER webサポート詳細のサイト。
また、 YESPER Store on Amazon 詳細情報と製品のアップデートについては、こちらをご覧ください。