BSEED 120V-1 Pack

BSEED 1800W Single Outlet Surge Protector User Manual

Model: 120V-1 Pack

1. はじめに

Thank you for choosing the BSEED 1800W Single Outlet Surge Protector. This device is designed to safeguard your valuable home appliances from electrical disturbances such as high/low voltage, power surges, spikes, and power failures. Its intelligent design includes a delay function to protect sensitive equipment during power restoration. Please read this manual carefully before use to ensure proper operation and longevity of your surge protector and connected appliances.

2. 安全情報

  • 屋内使用のみ: This surge protector is designed for indoor use in dry locations. Do not expose to moisture or wet conditions.
  • 電気定格: Do not exceed the electrical rating of 120V, 15A, 1800W. Overloading the device can cause damage or fire.
  • 接地: 壁のコンセントが適切にアースされていることを確認してください。サージプロテクターを効果的に保護するには、アースされたコンセントが必要です。
  • 換気: Do not block the ventilation openings of the surge protector.
  • 子供とペット: お子様やペットの手の届かない場所に保管してください。
  • ダメージ: Do not use if the surge protector or its cord appears damaged.
  • 分解: ユニットを分解したり改造したりしないでください。修理は必ず資格のある専門家にご依頼ください。

3 製品の特徴

The BSEED Surge Protector offers robust protection and user-friendly features:

  • 包括的な保護: Guards against high/low voltage, power failure, spikes, instantaneous surges, voltage fluctuations, and load dumping.
  • 自動カットオフ: 音量が下がると自動的に電源を切断しますtage is outside safe limits.
  • 3-Minute Delay Function: Prevents damage to appliances from rapid power cycling by delaying power restoration after an outage または voltagイベント。
  • インジケーターライト: Clear LED indicators for High/Low Protect, 5 Min Delay, and Normal/OK status.
  • 耐久性のある構造: Made from high-quality, fire-resistant ABS material (UL94-V-1.0 grade).
  • コンパクトなデザイン: Single outlet design that is space-saving and does not obstruct adjacent outlets.
  • 幅広い互換性: Suitable for refrigerators, computers, TVs, microwave ovens, water dispensers, ice makers, dishwashers, and other home appliances.
Diagram showing the light indications on the BSEED Surge Protector: High/Low Protect (red), 5 Min Delay (yellow), and Normal/OK (green). An ON button is also visible, along with the single AC outlet.

図3.1: 以上view of the surge protector's indicator lights and single AC outlet.

Image showing the compact dimensions of the BSEED Surge Protector, measuring 4.27 inches in height and 2.12 inches in width.

図3.2: Compact design and dimensions of the surge protector.

4. セットアップ

The BSEED Surge Protector features a simple plug-and-play design for easy installation.

  1. 開梱: サージ プロテクタをパッケージから慎重に取り出します。
  2. 検査: デバイスに目に見える損傷がないか確認してください。損傷がある場合は使用しないでください。
  3. プラグイン: Insert the surge protector directly into a standard 120V AC wall outlet. Ensure it is firmly seated.
  4. アプライアンスを接続: Plug your appliance (e.g., refrigerator, TV, PC) into the single AC outlet on the front of the surge protector.

The device will automatically begin its protection sequence. Refer to the Operating Instructions section for details on indicator lights.

Image illustrating the compact design of the BSEED Surge Protector plugged into a wall outlet, next to another appliance plug, demonstrating that it does not obstruct other sockets. Below, a cluttered power strip with tangled wires is shown with a red X, contrasting with the neat setup of the surge protector.

図4.1: The compact design allows for use without obstructing adjacent outlets.

5. 操作手順

The surge protector uses three indicator lights to communicate its status:

  • High/Low Protect (Red Light): This light illuminates when the voltage is outside the safe operating range (either too high or too low). When this light is on, power to the connected appliance is cut off to prevent damage.
  • 5 Min Delay (Yellow Light): This light indicates that the device is in its 3-minute delay period. This delay occurs after power is restored following an outage または voltage event, allowing the electrical system to stabilize before reconnecting power to the appliance.
  • Normal/OK (Green Light): This light indicates that the voltage is within the safe operating range and power is being supplied to the connected appliance.

Power Restoration Sequence:

  1. Upon initial plug-in or after a power outage, the device will enter a 3-minute delay period (Yellow Light on).
  2. During this delay, the surge protector monitors the voltage.
  3. 一度voltage stabilizes and the 3-minute delay concludes, the Yellow Light will turn off, and the Green Light will illuminate, supplying power to your appliance.

Manual Override (ON Button):

The ON button allows you to skip the 3-minute delay if you are present and confirm the voltage has returned to normal. Pressing the ON button during the delay period will immediately restore power to the appliance, provided the voltageは安定しています。

Detailed diagram of the BSEED Surge Protector showing the Normal/OK, 5 Min Delay, and High/Low Protect indicator lights, the ON button, and the 1 AC Outlet. Accompanying icons represent Over Voltage保護、Voltage Protection, and Delay/Set the Protection Range.

図5.1: 詳細 view of indicator lights and functions.

6. メンテナンス

The BSEED Surge Protector requires minimal maintenance.

  • クリーニング: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive chemicals.
  • 検査: Periodically inspect the device for any signs of wear or damage, especially after electrical storms or power fluctuations.
  • ストレージ: デバイスを保管する場合は、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。

7。 トラブルシューティング

サージ プロテクターで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題考えられる原因解決
Appliance not receiving power, Red Light (High/Low Protect) is on.入力ボリュームtage が高すぎるか低すぎます。The surge protector is functioning as designed. Wait for the voltage to return to normal. If the issue persists, consult an electrician.
Appliance not receiving power, Yellow Light (5 Min Delay) is on.Device is in its power-on delay sequence.Wait for the 3-minute delay to complete. The Green Light will illuminate when power is restored. You can press the ON button to manually override the delay if the voltageは安定しています。
No lights are on, appliance not receiving power.No power from the wall outlet or device malfunction.Check the wall outlet with another device. Ensure the surge protector is firmly plugged in. If no power, check your home's circuit breaker. If the problem persists, the unit may be faulty.
Green Light (Normal/OK) is on, but appliance is not working.Appliance issue, not surge protector.Check the appliance's power cord and its own power switch. Test the appliance by plugging it directly into a working wall outlet.

8. 仕様

特徴仕様
モデル120V-1 Pack
入力ボリュームtage120V 交流
最大電流15A
最大パワー1800W
総電源コンセント1
遅延時間3 minutes (approx. 180 seconds)
材料ABS (UL94-V-1.0 flame retardant grade)
アイテム重量4.9オンス
パッケージ寸法4.61 x 3.35 x 2.44インチ
特集Surge Protection, High/Low Voltag保護
推奨用途屋内

9. 保証とサポート

BSEED is committed to providing high-quality products and customer satisfaction.

  • 保証: This product comes with a standard manufacturer's warranty. Please refer to the product packaging or contact customer service for specific warranty terms and duration.
  • カスタマーサポート: If you have any questions, requests, or doubts regarding your BSEED Surge Protector, our customer service team is available to assist you 24 hours a day.

連絡先:

Please refer to the contact details provided on your product packaging or the official BSEED web最新のサポート情報については、サイトをご覧ください。

関連文書 - 120V-1 Pack

前view BSEED V723-WIFI スマートサージ&ボリュームtageプロテクター | Tuya WiFi コントロール
スマートWiFiサージとボリュームを備えたBSEED V723-WIFIをご覧くださいtagTuyaアプリによるリモートコントロール、調整可能な保護設定(過電圧保護)を提供するeプロテクターtage、under-voltag過負荷(例:過負荷)、タイマー機能など。詳細な仕様とFCC準拠情報も含まれています。
前view BSEED Smart Plug EA9 User Guide - Setup, Functions, and Safety
This user guide provides comprehensive instructions for the BSEED Smart Plug EA9. Learn how to set up the device using the Smart Life app, connect to Wi-Fi, and utilize functions such as remote control, scheduling, voice commands with Amazon Alexa and Google Assistant, and power monitoring. Includes detailed safety information and WEEE disposal guidelines.
前view WiFiタッチスイッチのインストールとユーザーマニュアル
安全に関する指示、配線図、アプリの接続手順など、WiFi タッチ スイッチのインストールと使用に関する包括的なガイド。
前view BHT-7000 スマートノブサーモスタット ユーザーマニュアルおよびインストールガイド
BHT-7000 スマート ノブ サーモスタットの総合ガイド。技術仕様、インストール、操作、Zigbee 接続、給湯、電気暖房、ガスボイラー システムのトラブルシューティングなどを網羅しています。
前view Smart Plug EA8 User Guide: Setup, Features, and Safety Information
Comprehensive user guide for the Smart Plug EA8. Learn how to set up, connect to WiFi, use app features like timing and voice control, and understand safety guidelines for this smart home device.
前view BSEED Bathroom Fan with Bluetooth Speaker, 3CCT & Night Light - Instruction Manual
This instruction manual guides users through the installation, operation, and troubleshooting of the BSEED Bathroom Fan, featuring a Bluetooth speaker, 3CCT adjustable lighting, and a night light. Enhance your bathroom with efficient ventilation and integrated smart features.