導入
The PGST PB-68 Door and Window Sensor is a crucial component of your PGST Home Security System, designed to detect unauthorized entry through doors and windows. This sensor operates by detecting the separation of its two main parts, triggering an alarm signal to your connected PGST alarm host and sending notifications to your smartphone. It provides real-time monitoring and enhances the security of your home or property.
重要： This sensor requires a PGST alarm host to function correctly and is compatible only with the PGST home security system.
パッケージ内容
- 1 x PGST PB-68 Door and Window Sensor (main unit and magnetic contact)
- 1 x Lithium Ion Battery (pre-installed)
- 1 x Double-sided Adhesive Tape for installation
設定
インストール要件
- A functional PGST alarm host (required for operation).
- A clean, dry surface for mounting the sensor.
インストール手順
- 表面を準備する: Clean the desired mounting area on your door or window frame and the corresponding moving part (door/window) to ensure proper adhesion.
- 粘着テープを取り付ける: Apply the provided double-sided adhesive tape to the back of both the main sensor unit and the magnetic contact.
- 本体の取り付け: Mount the larger sensor unit onto the fixed frame of the door or window.
- 磁気接点を取り付けます。 Mount the smaller magnetic contact onto the moving part of the door or window (the door itself or the window sash).
- コンポーネントを整列: Ensure that the main sensor unit and the magnetic contact are aligned horizontally and are less than 10 mm (approximately 0.4 inches) apart when the door or window is closed. Proper alignment is critical for correct operation.
- テストインストール: Open and close the door or window several times to verify that the sensor triggers and resets correctly. Confirm that your PGST alarm host registers the sensor's status changes.
操作手順
機能性
- 検出： When the door or window to which the sensor is attached is opened, the main sensor unit and the magnetic contact separate. This separation triggers the sensor.
- アラームトリガー: Upon being triggered, the sensor sends a signal to your connected PGST alarm host. The alarm host will then activate its siren (if armed) and initiate any programmed actions, such as sending notifications.
- リアルタイム監視: Through the PGST application on your smartphone, you can monitor the real-time status of your doors and windows (open or closed) 24 hours a day, 7 days a week. You will receive alarm signals on your mobile phone within seconds of a trigger event.
Pairing with PGST Alarm System
Refer to your PGST alarm host's user manual for specific instructions on how to add new sensors to the system. Generally, this involves putting the alarm host into pairing mode and then triggering the sensor (e.g., by separating its two parts) to register it with the system. The process is typically managed through the PGST mobile application.
メンテナンス
バッテリー交換
The PGST PB-68 sensor comes with a pre-installed Lithium Ion battery. When the battery level is low, your PGST alarm host or mobile application will typically notify you. To replace the battery:
- Carefully detach the main sensor unit from its mounting surface.
- Open the battery compartment (refer to the sensor's casing for specific opening mechanism, usually a small latch or screw).
- Remove the old Lithium Ion battery.
- Insert a new 3.7V Lithium Ion battery, ensuring correct polarity.
- Close the battery compartment and re-mount the sensor.
- Test the sensor to ensure it is functioning correctly with the alarm system.
クリーニング
センサーの外側は柔らかく乾いた布で拭いてください。液体クリーナーや研磨剤はデバイスを損傷する可能性があるため、使用しないでください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Sensor not triggering alarm. |
|
|
| スマートフォンに通知がありません。 |
|
|
| Sensor frequently triggers falsely. |
|
|
仕様
| モデル番号 | PB-68 |
| センサー技術 | 接触センサー |
| 電源 | 電池駆動 |
| 電池のタイプ | リチウムイオン電池 x 1（付属） |
| 巻tage | 3.7 ボルト (DC) |
| 材料 | プラスチック |
| インストール方法 | 粘着式 |
| 取り付けタイプ | 突き出た |
| 製品寸法 | 2.95 x 1.96 x 2.16インチ |
| アイテム重量 | 1.44オンス |
| 対応デバイス | PGST Home Security System, Smartphone (via app) |
保証とサポート
For warranty information, technical support, or further assistance with your PGST PB-68 Door and Window Sensor, please refer to the documentation provided with your PGST alarm host or visit the official PGST website. PGST is committed to customer experience and continuously improving its products and services.
さらに詳しい情報やサポートへのお問い合わせは、 PGST Store on Amazon.
