1.製品オーバーview
The VDIAGTOOL V200 Pro and VD30 Pro are advanced automotive diagnostic tools designed to assist in identifying and resolving electrical and engine-related issues in vehicles. The V200 Pro is a versatile power circuit probe tester and breaker finder, while the VD30 Pro is a comprehensive OBD2 scanner.
Image 1.1: The VDIAGTOOL V200 Pro Automotive Power Circuit Probe Tester and VD30 Pro OBD2 Scanner Diagnostic Tool.
主な特徴:
- V200プロ: Comprehensive circuit testing including open circuits, tracing wires, AC/DC voltage, diode, resistance, polarity, continuity, ground, component activation, signal circuit, relay, fuse, and trailer light tests.
- VD30 Pro: Full OBD2 diagnostic capabilities including reading/clearing fault codes, live data graphing, freeze frame, I/M readiness, O2 sensor tests, and vehicle information.
- User-friendly interfaces for efficient operation.
- 信頼性の高いパフォーマンスを実現する耐久性のある構造。
2. V200 Pro Automotive Power Circuit Probe Tester
2.1コンポーネントとアクセサリ
The V200 Pro kit includes the main circuit probe tester unit and a comprehensive set of accessories for various testing scenarios.
Image 2.1: The VDIAGTOOL V200 Pro kit, including the circuit probe, breaker finder, and various connectors.
- V200 Pro Circuit Tester Unit
- 30 PCS Back Probe Kit: Includes 15 back probe pins, 5 banana plug to alligator clip circuit test wires, 5 wire piercing probes, and 5 nickel-plated copper alligator clips.
- Extension Cables (20FT + 20FT)
2.2 Functions and Capabilities
The V200 Pro is designed for a wide range of electrical diagnostic tasks:
画像2.2: 以上view of the V200 Pro's multifunctional automotive circuit testing capabilities.
- Circuit Open Test
- トレースワイヤー
- AC / DC Voltageテスト
- ダイオード試験
- 耐性テスト
- 極性テスト
- 導通テスト
- Ground Test
- コンポーネントをアクティブ化する
- Signal Circuit Test
- Relay, Fuse, Trailer Light Test
It effectively locates short circuits, broken wires, and helps trace electrical paths within the vehicle's system.
Image 2.3: The V200 Pro power probe circuit tester effectively diagnosing electrical problems.
3. VD30 Pro OBD2 Scanner Diagnostic Tool
3.1 Functions and Capabilities
The VD30 Pro is designed to provide comprehensive diagnostic information for OBD2 compliant vehicles, helping users understand and resolve engine-related issues.
Image 3.1: The VD30 Pro's powerful OBD2 scanner diagnostic tool interface and key features.
- Turn off Check Engine Light (CEL)
- Read/Clear Fault Codes (DTCs)
- Live Data (4-In-1 Graphing)
- フリーズフレームデータ
- One-Click I/M Readiness (Smog Check)
- オンボードモニターテスト（モード06）
- コンポーネントテスト
- O2センサーテスト
- 車両情報（VIN、CIN、CVN）
- モジュールあり
- 巻tageテスト
- DTCルックアップライブラリ
- Data Playback & Printing
Image 3.2: The VD30 Pro's capability to clear fault codes and turn off the Check Engine Light (MIL).
4. セットアップ
4.1 V200 Pro Setup
- 電源接続: Connect the V200 Pro to the vehicle's 12V or 24V battery using the provided alligator clips or cigarette lighter adapter. Ensure correct polarity (red to positive, black to negative).
- ツールのアクティベーション: デバイスは接続されると自動的に電源が入ります。
- 付属品: Attach the appropriate back probe pins, test wires, or piercing probes to the V200 Pro's main probe for specific testing needs.
4.2 VD30 Pro Setup
- OBD2 ポートを見つけます: Identify the 16-pin OBD2 diagnostic port in your vehicle, typically located under the dashboard on the driver's side.
- スキャナーを接続: Plug the VD30 Pro's OBD2 cable into the vehicle's OBD2 port.
- 電源オン: The scanner will power on automatically from the vehicle's electrical system.
- システムの初期化: The scanner will perform a system initialization and attempt to link to the vehicle's ECU. Follow on-screen prompts.
5. 操作手順
5.1 V200 Pro Operation
- モード選択: Use the navigation buttons on the V200 Pro to select the desired test mode (e.g., Voltage Test, Continuity Test, Component Activation).
- Performing Tests:
- 巻tageテスト： Touch the probe tip to the circuit point. The display will show the voltage読書。
- 導通テスト: Connect the probe to one end of the circuit and the ground clip to the other. An audible tone and display indication confirm continuity.
- コンポーネントのアクティベーション: Select the activation mode, then touch the probe to the component's power input. Use the power switch on the V200 Pro to apply positive or negative voltage.
- Tracing Wires/Breaker Finding: Utilize the breaker finder unit in conjunction with the probe to locate breaks or shorts in wiring.
- 結果の解釈: Observe the display for numerical readings, polarity indicators (red/green LED), and audible alerts.
5.2 VD30 Pro Operation
- メインメニュー: Once connected and linked, navigate the main menu using the directional buttons.
- コードを読む： Select "Read DTC" to retrieve current, pending, and permanent diagnostic trouble codes.
- クリアコード: After addressing the issue, select "Clear DTC" to erase codes and turn off the Check Engine Light. Note: Ensure the underlying problem is fixed before clearing codes to prevent recurrence.
- ライブデータ： Choose "Live Data" to view real-time sensor data. Use the graphing function for visual analysis of parameters.
- I / M準備： Select "I/M Readiness" to check the status of emission-related monitors, useful for smog checks.
- DTC ルックアップ: Use the built-in DTC Lookup function to get detailed descriptions of retrieved fault codes.
6. メンテナンス
- クリーニング： Wipe the tools with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the tools are dry before storage.
- ストレージ： Store the V200 Pro and VD30 Pro in their original case or a protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
- ケーブルのお手入れ: Avoid sharp bends or kinks in the cables. Store them neatly coiled to prevent damage.
- プローブチップ: Keep the V200 Pro's probe tip clean and free of debris for accurate readings.
7。 トラブルシューティング
7.1 V200 Pro Troubleshooting
- 電源なし: Ensure the power clips are securely connected to the vehicle battery terminals with correct polarity. Check the vehicle's battery voltage.
- 不正確な読み取り: Verify the probe tip is making good contact with the circuit. Ensure the ground clip has a solid connection to a clean metal ground point on the vehicle chassis.
- 導通表示なし: Check if the circuit is truly continuous. Ensure connections are secure.
7.2 VD30 Pro Troubleshooting
- Link Error/No Communication:
- Verify the OBD2 cable is firmly connected to both the scanner and the vehicle's OBD2 port.
- 車両のイグニッションがオンの位置にあることを確認します（テストに応じて、エンジンはオフまたは作動中）。
- 車のバッテリー容量を確認するtage; 低ボラティリティtag通信を妨げる可能性があります。
- スキャナーの故障を排除するために、別の OBD2 対応車両でスキャナーを試してください。
- コードをクリアできません: Codes cannot be cleared if the underlying fault is still present. Address the issue first, then attempt to clear codes.
- 画面がフリーズする: Disconnect the scanner from the vehicle, restart it, and reconnect.
8. 仕様
| 属性 | 詳細 |
|---|---|
| ブランド | VDIAGTOOL |
| モデル番号 | VDIAGTOOL-V200-Pro, VDIAGTOOL-VD30-Pro |
| 電源 | Battery Powered (via vehicle's battery) |
| 色 | 黒 |
| 測定タイプ | Voltmeter, Ohmmeter, Ammeter (V200 Pro) |
| 初回利用可能日 | 21年2024月XNUMX日 |
9. 保証とサポート
VDIAGTOOL offers comprehensive support for its products:
- 保証： 1 Year Warranty from the date of purchase.
- テクニカルサポート： 24/7 Lifetime technical support is available.
- 返品/返金: 60 Days No-Question-Asked NEW REPLACEMENT OR REFUND policy.
For any questions or concerns, please reach out to VDIAGTOOL customer support via email: vdiagtool2@outlook.com.
