Fender Bassman Reverb Pedal

導入

The Fender Bassman Reverb Pedal is designed to provide bass-tuned room and hall reverb effects, enhancing your instrument's tone with depth and space. This pedal incorporates meticulously crafted analog and digital circuits to deliver professional-grade reverb while maintaining low-end clarity. Its compact design makes it suitable for any pedalboard.

主な特徴

• Bass-tuned room and hall reverb DSP algorithms with analog dry-through.
• Low cut knob and pre-delay switch to maintain signal clarity.
• 内部damp control for adjusting the high frequency content of the reverb signal.
• ソフトタッチで切り替え可能な、トレイル付きのトゥルーバイパスまたはバッファードバイパス。
• Side-mounted pad switch to suit active basses.

設定

ペダルを接続する前に、 amplifier and other effects are powered off. Use high-quality instrument cables for optimal signal integrity.

接続

1. ベースギターを 入力 ペダルのジャック。
2. 接続する 出力 ペダルのジャックを ampライターの入力。
3. Connect a 9V DC power supply (center-negative) to the 9V DC IN ジャック。

図1：背面 view of the pedal with input, output, and power connections.

The rear of the pedal features clearly labeled input, output, and power jacks for easy connection to your instrument and amplifier。

操作コントロール

The Bassman Reverb Pedal features intuitive controls for shaping your desired reverb sound. Familiarize yourself with each knob and switch to unlock the pedal's full potential.

図2：上 view ペダルのコントロールレイアウト。

ノブ

• 時間： Adjusts the length of the reverb decay. Turn clockwise for longer, more expansive reverb tails.
• ローカット： Controls the amount of low frequencies removed from the reverb trails. This helps prevent muddiness and maintains bass clarity.
• レベル： Sets the overall output volume of the reverb effect.

スイッチ

• タイプ： Selects between different reverb algorithms (e.g., Room, Hall). Refer to the description for specific algorithm details.
• PRE： Engages or disengages the pre-delay function, which introduces a slight delay between the dry signal and the onset of the reverb. This can add clarity to individual notes.

内部統制

• DAMP コントロール： An internal control that adjusts the high-frequency content of the reverb signal. This allows for fine-tuning the brightness or darkness of the reverb.
• Bypass Switch (True/Buffered): The pedal offers soft-touch switchable true or buffered bypass with trails. This setting can typically be adjusted via an internal switch or specific power-up sequence. Consult the full technical manual for detailed instructions on changing bypass modes.

Side-Mounted Switch

• パッドスイッチ: A side-mounted switch designed to accommodate active basses by providing an input pad, preventing signal overload.

ペダルに動力を与える

The Bassman Reverb Pedal operates on a standard 9V DC power supply (center-negative). Ensure the power supply meets the specified voltage and polarity requirements to avoid damage to the unit.

• 巻tage: 9ボルト
• Amperage： 100ミリamps（最小推奨）
• 電源: Battery Powered (internal 9V battery) or external DC power supply.

メンテナンス

To ensure the longevity and optimal performance of your Bassman Reverb Pedal, follow these maintenance guidelines:

• クリーニング： ペダルの外側を拭く際は、柔らかく乾いた布をご使用ください。研磨剤入りの洗剤や溶剤は使用しないでください。
• ストレージ： ペダルは直射日光や極端な温度を避け、乾燥した涼しい場所に保管してください。
• バッテリー交換: If using a battery, replace it when the indicator light dims or the effect performance degrades. Disconnect the input cable when not in use to conserve battery life.
• 接続: すべてのケーブル接続部の締め付け具合や摩耗を定期的に確認してください。

トラブルシューティング

If you experience issues with your pedal, try the following steps:

• 音が出ない: Check all cable connections, power supply, and ensure the pedal is engaged. Test with different cables and power supply if possible.
• Weak/Distorted Sound: Verify the input signal level (especially with active basses and the PAD switch). Check battery life if applicable.
• 過度の騒音: Ensure you are using a high-quality, isolated power supply. Check for ground loops in your signal chain.
• 効果が得られない: Ensure the footswitch is functioning correctly. If in buffered bypass mode, check the internal bypass setting.

仕様

保証とサポート

For warranty information, technical support, or service inquiries, please refer to the official Fender website or contact your authorized Fender dealer. Keep your purchase receipt as proof of purchase.