BTF-LIGHTING SP530E LEDコントローラー（RB3リモートキット付き）ユーザーマニュアル

1. はじめに

Thank you for choosing the BTF-LIGHTING SP530E LED Controller with RB3 Remote Kit. This device offers versatile control over various LED light strips, integrating WiFi, Bluetooth, and 2.4GHz RF technologies. It supports smart home platforms like Alexa and Google Home, providing a comprehensive lighting control solution for your environment. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

2. 安全情報

• 電源のボリュームを確認してくださいtage matches the requirements of the LED strip (DC5V-24V).
• コントローラーを湿気や極端な温度にさらさないでください。
• Disconnect power before making any wiring connections to prevent electrical shock.
• このデバイスは屋内専用に設計されています。
• お子様の手の届かない場所に保管してください。

3. パッケージ内容

The BTF-LIGHTING SP530E+RB3 Kit includes the following items:

• 1x SP530E LED Controller
• RB3 RFリモコン x 1

4 製品の特徴

• All-in-One LED Controller: Compatible with various LED strip types including PWM 3CH RGB, 4CH RGBW (without IC), and SPI RGB/RGBW (with Addressable IC Chip). Supports up to 1,200 ICs for SPI RGB LED strips and 900 ICs for SPI RGBW LED strips.
• サードパーティの音声コントロール: Seamlessly integrates with smart speaker platforms such as Amazon Alexa and Google Home for voice commands to control light switches, brightness, and color.
• 4ゾーンコントロール: The RB3 RF remote allows control of up to 4 distinct lighting zones. Supports one-to-many control (one remote controls multiple controllers) and multi-to-one control (each controller can bind up to 5 RF remotes).
• 色調整: Feature to calibrate colors if the app display is inconsistent with the LED strip's output.
• タイミング機能: Set up to 5 timers for automated lighting schedules.
• メモリ機能: Retains settings in case of power loss. Supports Power On/Off Effect Setting, Fun Switch Setting, and Default Switching State Setting.
• 2.4GHz Wireless Remote Control: Offers a control distance of up to 30 meters (98 feet) in open spaces.
• LED Matrix Spectrum Effect: Configure rectangular LED Matrix size and alignment, and set music spectrum parameters like color, saturation, and direction for unique music synchronization.

画像: 上view of control methods including app, RB3 remote, and third-party voice control (Alexa, Google Home).

Image: Key features of the RGB/RGBW RF Wireless Controller, including PWM/SPI support, Bluetooth, music effects, color calibration, and app/RF/Alexa control.

5. セットアップ

5.1. LEDコントローラーの配線

The SP530E controller supports various LED strip types. Ensure correct wiring based on your LED strip's specifications (SPI with IC or PWM without IC, and RGB/RGBW configuration). The input voltage (DC5V-24V) depends on your LED strip.

5.1.1. SPI RGB LED Strip Wiring (e.g., WS2812B, WS2811, WS2815)

Image: Wiring diagram for an SPI RGB LED Strip (e.g., WS2812B). Connect VCC, DAT, and GND from the controller to the corresponding pins on the LED strip.

Image: Wiring diagram for an SPI RGB LED Strip (e.g., WS2815). Connect VCC, BI, DI, and GND from the controller to the corresponding pins on the LED strip.

5.1.2. SPI RGBW LED Strip Wiring (e.g., SK6812RGBW, WS2814RGBW)

Image: Wiring diagram for an SPI RGBW LED Strip (e.g., SK6812RGBW, WS2814RGBW). Connect VCC, DAT, and GND from the controller to the corresponding pins on the LED strip.

5.1.3. PWM RGB LED Strip Wiring (e.g., 5050 RGB, FCOB RGB)

Image: Wiring diagram for a PWM RGB LED Strip (e.g., 5050 RGB, FCOB RGB). Connect VCC, R, G, B, and GND from the controller to the corresponding pins on the LED strip.

5.1.4. PWM RGBW LED Strip Wiring (e.g., 5050 RGBW, FCOB RGBW)

Image: Wiring diagram for a PWM RGBW LED Strip (e.g., 5050 RGBW, FCOB RGBW). Connect VCC, R, G, B, W, and GND from the controller to the corresponding pins on the LED strip.

5.2. アプリのインストールと接続

Download the BanlanX app from your smartphone's app store. Follow the in-app instructions to connect the SP530E controller via WiFi or Bluetooth.

5.2.1. Setting LED Type in App

After connecting, it is crucial to set the correct LED type in the app to ensure proper functionality and color accuracy.

1. Enter the parameter setting interface in the app.
2. Select 'Modify Light Type' and choose the appropriate LED type (e.g., SPI RGB, PWM RGBW).
3. Follow the prompts to complete color correction if needed.

Image: App interface showing steps to set the LED type for SPI RGB LED strips and perform color correction.

Image: App interface showing steps to set the LED type for SPI RGBW LED strips and perform color correction.

Image: App interface showing steps to set the LED type for PWM RGB LED strips and perform color correction.

Image: App interface showing steps to set the LED type for PWM RGBW LED strips and perform color correction.

5.3. Pairing the RB3 RF Remote Control

The RB3 remote can control up to 4 zones. Follow these steps to pair the remote with your SP530E controller(s).

5.3.1. リモコンのバインド

• Power on the controller. Within 20 seconds, long press the ON button on the RB3 remote. The LED strip will flash to indicate successful binding.

5.3.2. リモコンのバインドを解除する

• Power on the controller. Within 20 seconds, first turn off the lights completely using the remote, then long press the オフ バインドされたすべてのリモコンをクリアするボタン。

5.3.3. Zone Setting

The RB3 remote allows you to assign controllers to specific zones (1-4).

• ショートプレス: Select a specific zone (1, 2, 3, or 4). Short press the zone number, then press the ON button. Only that zone will respond.
• 長押し： To set a controller to a specific zone, power on the controller. Within 20 seconds, long press the desired zone key (1, 2, 3, or 4).

Image: Illustration of short press and long press functions for zone setting on the RB3 remote control.

5.3.4. グループの設定と制御

The RB3 remote supports controlling multiple controllers in groups, with each group controlling an LED strip within 30m (98ft). There is no limit to the number of controllers in a group.

Image: Diagram showing how multiple SP530E controllers can be grouped and controlled by a single RB3 RF remote.

Image: Illustration of the RB3 remote controlling four separate zones within a home environment.

Image: Depiction of multiple RB3 remotes controlling a single lighting zone, demonstrating multi-to-one control capability.

6. 操作手順

6.1. App Control (BanlanX App)

The BanlanX app provides comprehensive control over your SP530E controller. The app features Dynamic, Static, Music, and DIY modes, along with various settings.

画像: 上view of the BanlanX app interface, showing Dynamic, Static, Music, DIY modes, and the Settings menu.

6.1.1. Music Effects

The app supports both multi-segment LED strip music effects and matrix LED music spectrum effects.

• Multi-segment LED Strip Music Effects: Configure segments and pixels of light strips. Each segment can have a different music effect with four audio ranges (low, middle, high, full frequency).
• Matrix LED Music Spectrum Effects: Flexibly configure the size and alignment of the rectangular LED Matrix. Adjust parameters like color, saturation, and direction for sound column effects.

Image: App screenshots demonstrating multi-segment LED strip music effects and matrix LED music spectrum effects.

6.2. RB3 RF Remote Control Functions

The RB3 remote provides quick access to essential lighting controls.

• オンボタン: Short press to turn on the light. Long press (within 20s of power-on) to bind/unbind the remote control.
• OFFボタン： Short press to turn off the light. Long press (within 20s of power-on, after turning off lights) to clear all bound remote controls.
• すべてボタン: Short press to select all zones. Long press (within 20s of power-on) to unset the zones.
• カラーホイール: Touch to select desired color.
• Brightness/Speed Control: Adjust brightness or effect speed.
• Zone Selection (1-4): Select individual zones for control.

Image: Detailed functions of the RB3 RF remote control, including ON/OFF, ALL, and zone selection.

6.3. 音声コントロール（AlexaとGoogle Home）

The SP530E controller supports third-party voice control without needing a 2.4GHz gateway.

Image: Demonstrates smartphone app control and compatibility with Amazon Alexa and Google Assistant for voice commands.

6.3.1.Alexaに接続する

1. Open the BanlanX app and navigate to the 'Me' section.
2. Select 'Third-Party Voice Services'.
3. Choose 'Amazon Alexa'.
4. Click 'Quick Link' to proceed.
5. In the Alexa App, search for 'BanlanX' in the Skills & Games section. Ensure you select the correct skill.
6. Enable the skill and log in to your BanlanX account to link.

Image: Step-by-step guide within the BanlanX app to connect the SP530E controller to Amazon Alexa.

Image: Instructions for finding and enabling the BanlanX skill within the Amazon Alexa application.

6.4. 公式製品ビデオ

7. メンテナンス

• コントローラーは清潔に保ち、ほこりを取り除いてください。清掃には柔らかく乾いた布を使用してください。
• デバイスを直射日光や熱源にさらさないでください。
• 配線接続が安全であるかどうかを定期的に確認してください。

8。 トラブルシューティング

• ライトが点灯しない: Check power connections to the controller and LED strip. Ensure the power supply is adequate for the LED strip.
• リモコンが応答しない: Check if the remote is paired correctly (refer to Section 5.3). Ensure the remote's battery is not depleted.
• アプリ接続の問題: Verify your WiFi network is 2.4GHz. Restart the controller and your smartphone. Ensure the BanlanX app is updated to the latest version.
• 間違った色: Perform color calibration through the BanlanX app (refer to Section 5.2.1). Ensure the correct LED type is selected in the app settings.
• Delay in power-on with wall switch: If connected to a standard wall switch, there might be a 15-second delay for WiFi connection before lights turn on. This is normal behavior for WiFi-enabled controllers.

9. 仕様

Image: EU Energy Label for FCOB RGB LED Strip. For more details, visit https://eprel.ec.europa.eu/qr/1411725.

10. 保証とサポート

Specific warranty information is not provided in the product details. For warranty claims, technical support, or further assistance, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING webサイト。