Sylvania A19 LED Light Bulbs Instruction Manual

1. はじめに

Thank you for choosing Sylvania A19 LED Light Bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

2.製品オーバーview

This package includes a combination of Sylvania A19 LED light bulbs designed to replace traditional incandescent bulbs. You will find both 40W equivalent (6W, 450 lumens) and 60W equivalent (8.5W, 800 lumens) bulbs, all featuring a soft white (2700K) color temperature and a standard medium (E26) base.

Image 1: Sylvania A19 LED Light Bulbs, showing both 40W and 60W equivalent bulbs in their packaging.

These energy-efficient bulbs offer instant illumination, long lifespan, and are free from UV/IR emissions, mercury, and lead.

3. 安全情報

• 感電の危険: 電球を点検、取り付け、または取り外す前に、必ず器具の電源を切ってください。
• 屋内使用のみ: これらの電球は乾燥した屋内での使用を目的として設計されています。湿気の多い場所や暗い場所では使用しないでください。amp 器具がそのような条件に対して特別に定格されていない限り、環境には適しません。
• 密閉器具には使用不可: Avoid using these bulbs in fully enclosed fixtures, as this can shorten their lifespan due to heat buildup.
• 調光不可: These bulbs are non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or dimmer.
• 動作温度: Suitable for operation in temperatures between -20°C and +40°C (-4°F and +104°F).
• 重さ： Do not use in fixtures where the bulb's weight might exceed the fixture's capacity.

4. セットアップとインストール

Installation of Sylvania A19 LED light bulbs is straightforward. Follow these steps:

1. 電源を切る: Locate the light switch or circuit breaker controlling the fixture and turn off the power completely.
2. 古い電球を取り外す: 既存の電球を器具から慎重に取り外します。最近使用していた場合は、冷めるまでお待ちください。
3. 新しいLED電球を挿入します: Gently screw the Sylvania A19 LED bulb into the socket until it is snug. Do not overtighten.
4. 電力を回復する： スイッチまたは回路ブレーカーで電源を再度オンにします。
5. テスト： Turn on the light switch to ensure the bulb illuminates correctly.

Image 2: A set of four Sylvania A19 LED light bulbs, ready for installation.

5. 操作手順

Sylvania A19 LED light bulbs operate like traditional bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off. These bulbs provide instant full brightness with no warm-up time.

6. メンテナンス

These LED bulbs require minimal maintenance due to their long lifespan of up to 11,000 hours.

• クリーニング： 電球を清掃する際は、電源を切って電球が冷えていることを確認してください。柔らかく乾いた布で優しく拭いてください。液体クリーナーや研磨剤は使用しないでください。
• 交換： When the bulb reaches the end of its life, follow the installation steps in Section 4 to replace it with a new Sylvania A19 LED bulb. Dispose of old bulbs according to local regulations.

7。 トラブルシューティング

If your Sylvania A19 LED bulb does not light up after installation, consider the following:

• 電源なし: Check if the light switch is in the 'ON' position. Verify that the circuit breaker for the fixture has not tripped.
• 緩い接続: Turn off the power, then carefully re-screw the bulb into the socket to ensure a secure connection.
• Incorrect Fixture: Ensure the fixture is compatible with A19 bulbs and has a medium (E26) base.
• ディマースイッチ: Confirm that the fixture is not connected to a dimmer switch, as these non-dimmable bulbs are not compatible.
• Damaged Bulb: If the above steps do not resolve the issue, the bulb may be faulty. Replace it with a new one.

8. 仕様

9. 保証とサポート

For warranty information or technical support, please refer to the packaging or contact LEDVANCE customer service directly. Keep your purchase receipt as proof of purchase.