UBPet スマート冷却式自動ウェットフードフィーダー ユーザーマニュアル

導入

Thank you for choosing the UBPet Smart Cooled Automatic Wet Food Feeder. This device is designed to provide your pet with fresh, healthy meals throughout the day, ensuring their well-being even when you are away. Please read this manual carefully before use to ensure proper operation and maintenance.

安全情報

• 給餌器は常に安定した水平な場所に置いてください。
• Ensure the power cord is not damaged and is placed where it cannot be tripped over or chewed by pets.
• Do not immerse the main unit in water. Only the removable food trays are washable.
• お子様の手の届かない場所に保管してください。
• デバイスに付属の電源アダプターのみを使用してください。
• この製品は屋内使用のみを目的としています。

製品終了view

The UBPet Smart Cooled Automatic Wet Food Feeder features a unique design with multiple compartments and an integrated cooling system to keep wet food fresh for up to 24 hours. It allows for scheduled feeding of up to five meals.

画像の説明: An exploded diagram showing the various components of the UBPet Smart Cooled Automatic Wet Food Feeder. Key parts include the top lid, the five-compartment food tray, the cooling panel, the main base unit, and the push-button mechanism.

コンポーネント:

• 本体: Houses the cooling system and control panel.
• フードトレイ： A removable tray with five individual compartments, each with a capacity of approximately 330 ml.
• 蓋： Covers the food tray to maintain freshness and prevent access until scheduled feeding times.
• 電源アダプター: フィーダーを電源コンセントに接続します。

設定

1. 開梱： パッケージからすべてのコンポーネントを慎重に取り出します。
2. クリーン： Wash the removable food tray and lid with mild soap and water. Rinse thoroughly and dry completely before use.
3. 組み立てる： Place the clean, dry food tray into the main unit. Ensure it sits securely.
4. コンパートメントを埋める: Place your pet's wet food into the desired compartments. Each compartment can hold up to 330 ml of food.

画像の説明: トップダウン view of the UBPet Smart Cooled Automatic Wet Food Feeder with its lid removed, showing the five compartments filled with different types of pet food, including wet meat, shrimp, and dry kibble.
5. 安全な蓋: Place the lid onto the feeder, ensuring it is properly aligned.
6. 接続電源： Plug the power adapter into the feeder and then into a wall outlet. The display will illuminate.

操作手順

Setting Meal Times:

The feeder allows you to schedule up to five meals per day. The smart timer ensures precise delivery of each meal.

1. アクセス設定: Refer to the control panel on the feeder. Typically, there are buttons for 'Set', 'Up', and 'Down'.
2. 現在の時刻を設定: Before setting meal times, ensure the current time is correctly set on the device.
3. プログラム食事: Use the 'Set' button to cycle through meal slots (e.g., M1, M2, M3, M4, M5). For each meal slot, use the 'Up' and 'Down' buttons to set the desired feeding time.
4. Activate Meals: Ensure each programmed meal slot is activated (usually indicated by an icon or number on the display).

画像の説明: The UBPet Smart Cooled Automatic Wet Food Feeder with its digital display showing programmed feeding times for multiple meals, indicating precise timing capabilities.

Adjusting Cooling Temperature:

The feeder features a semiconductor cooling system with three adjustable temperature levels to keep food fresh.

• Locate the temperature control button or setting on the control panel.
• Cycle through the three available temperature levels (e.g., Low, Medium, High) to select the appropriate cooling intensity for your pet's food and ambient conditions.

手動給紙:

If available, a manual feed button allows you to dispense a meal immediately, outside of the scheduled times.

メンテナンス

定期的に清掃することで衛生状態が保たれ、給餌器の寿命が延びます。

• 毎日の清掃: Remove any leftover food from the compartments.
• 毎週の清掃： Disassemble the food tray and lid. Wash them with mild soap and water. Rinse thoroughly to remove all soap residue and dry completely before reassembling.
• 本体: 本体を拭いてamp 布で拭いてください。研磨剤入りの洗剤を使用したり、本体を水に浸したりしないでください。
• Ensure all parts are dry before reassembling and plugging in the device.

トラブルシューティング

• フィーダーがオンにならない: Check if the power adapter is securely plugged into both the feeder and the wall outlet. Ensure the outlet is functional.
• 食べ物が出ない: Verify that meal times are correctly set and activated. Check if the food tray is properly installed and not obstructed. Ensure there is food in the compartments.
• Cooling not working: Check if the cooling function is enabled and the temperature level is set. Ensure the feeder is not placed in direct sunlight or near a heat source.
• 異常なノイズ: If you hear unusual noises, unplug the feeder immediately and contact customer support.

仕様

保証とサポート

For warranty information and customer support, please refer to the documentation included with your product or visit the official UBPet webサイトでご確認ください。購入証明として購入レシートを保管してください。