導入
The Visual Land SOUNDWAVE A1 (2024 Edition) Active Noise Cancelling Earbuds are designed to provide a superior audio experience with advanced features for daily use. These earbuds offer 6-microphone active noise cancellation, extended playtime, and fast charging capabilities, all within a water-resistant design.
箱の中身
- Soundwave A1 Earbuds (Rose) and Charging Case
- USB-C充電ケーブル
- Additional Ear Tips Sizes (S, M, L)
- ユーザーマニュアル
製品終了view
Familiarize yourself with the components of your Soundwave A1 Earbuds.

Image: The rose-colored Soundwave A1 earbuds resting inside their matching charging case, with the case lid closed. Three indicator lights are visible on the front of the case.

Image: The rose-colored Soundwave A1 earbuds are shown inside their open charging case, revealing the individual earbud slots and the charging contacts.

画像:側面 view of both rose-colored Soundwave A1 earbuds, highlighting their ergonomic design and the stem extending from the main body.
設定
1. イヤホンとケースの充電
Before first use, fully charge the Soundwave A1 earbuds and their charging case. The case provides additional charges for extended playtime.
- 付属のUSB-C充電ケーブルをケースの充電ポートに接続します。
- ケーブルのもう一方の端を互換性のある USB 電源 (壁のアダプタ、コンピュータの USB ポートなど) に接続します。
- The indicator lights on the case will show charging status. A full charge of the case provides up to 30 hours of battery life for the earbuds.
- For quick power, 15 minutes of charging provides up to 5 hours of playtime.
2.Bluetoothペアリング
Pair your Soundwave A1 earbuds with your device for wireless audio.
- イヤホンが充電ケースに入っており、ケースが開いていることを確認します。
- デバイス(スマートフォン、タブレットなど)で、Bluetooth 設定に移動します。
- Select "Soundwave A1" from the list of available devices.
- 接続されると確認音が鳴り、イヤホンが使用できるようになります。
- イヤホンは Bluetooth 5.3 を採用し、安定した効率的な接続を実現します。
3. イヤホンの装着
For optimal sound quality and comfort, select the correct ear tip size.
- The Soundwave A1 comes with 3 ear tip sizes (Small, Medium, Large).
- Try each size to find the one that provides a secure and comfortable fit in your ear canal. A good seal is crucial for effective Active Noise Cancellation.
操作手順
タッチコントロール
The Soundwave A1 earbuds feature intuitive touch controls for managing audio playback and calls.
| アクション | 関数 |
|---|---|
| シングルタップ | 音楽の再生/一時停止、通話の応答/終了 |
| ダブルタップ(右イヤホン) | 次のトラック |
| ダブルタップ(左イヤホン) | 前のトラック |
| トリプルタップ | 音声アシスタントを有効にする |
| 長押し(2秒) | Toggle Active Noise Cancellation (ANC) / Transparent Mode / Off |
| 長押し(着信中) | 通話を拒否 |
アクティブノイズキャンセル(ANC)
The Soundwave A1 features 6-microphone Active Noise Cancellation to reduce ambient noise. Long press either earbud to cycle through the following modes:
- ANCオン: Blocks out most external noise for an immersive listening experience.
- 透過モード: オーディオを楽しみながら周囲の音も聞くことができ、混雑した環境での注意力向上に役立ちます。
- ANC オフ: ノイズキャンセルなしの標準オーディオ再生。
Video: Demonstrates the Active Noise Cancellation feature of the Soundwave A1 earbuds, showing users enjoying immersive sound in various environments and highlighting the long-lasting battery life.
メンテナンス
クリーニング
定期的にクリーニングすると、イヤホンの性能と寿命を維持するのに役立ちます。
- 柔らかく乾いた糸くずの出ない布でイヤホンと充電ケースを優しく拭いてください。
- イヤーチップを取り外し、必要に応じて中性洗剤と水で洗ってください。再び装着する前に、完全に乾いていることを確認してください。
- 乾いた綿棒を使用して、イヤホンとケース内部の充電接点を慎重に清掃します。
耐水性
The Soundwave A1 earbuds are IPX5 water-resistant, meaning they can withstand splashes and sweat. They are not designed for submersion in water. Avoid exposing them to strong jets of water or prolonged immersion.
トラブルシューティング
If you encounter issues with your Soundwave A1 earbuds, try the following solutions:
- イヤホンがペアリングされない:
- デバイスで Bluetooth が有効になっていることを確認してください。
- イヤホンが完全に充電されていることを確認してください。
- イヤホンをケースに戻し、蓋を閉じて数秒待ってから蓋を開けてペアリング モードを再度開始します。
- Forget "Soundwave A1" from your device's Bluetooth settings and try pairing again.
- 片方のイヤホンが動作しない/充電できない:
- Ensure the earbud is properly seated in the charging case and the charging contacts are clean.
- 充電ケースのバッテリーレベルを確認してください。
- Try resetting the earbuds (refer to specific reset instructions if available in the full manual, otherwise, a general suggestion is to place them in the case and hold a button for 10 seconds if one exists).
- 音質が悪い:
- Ensure the ear tips provide a good seal in your ear. Try different sizes.
- イヤホンのスピーカーからゴミを取り除きます。
- 干渉を避けるため、接続されたデバイスに近づいてください。
- アクティブノイズキャンセレーションが効果がない:
- Ensure ANC is activated (long press touch control).
- Verify that the ear tips create a proper seal in your ear canal.
仕様
| 特徴 | 詳細 |
|---|---|
| モデル名 | SOUNDWAVE A1 V2 |
| 接続技術 | ワイヤレス、Bluetooth |
| 無線通信技術 | ブルートゥース |
| Bluetoothバージョン | 5.3 |
| 騒音制御 | Active Noise Cancellation (6-mic) |
| 制御方法 | タッチコントロール |
| 耐水性レベル | IPX5防水 |
| 合計プレイ時間(ケース付き) | 最大40時間 |
| 急速充電 | 15 minutes charge for up to 5 hours playtime |
| キャリングケースバッテリー容量 | 500ミリamp 営業時間 |
| 材料 | プラスチック |
| アイテム重量 | 2オンス |
| 色 | 薔薇 |
| 耳の位置 | 耳に装着 |
| フォームファクター | 耳に装着 |
| 対応デバイス | iOS and Android devices (wide range listed in product data) |
重要な安全情報
- 製品を分解したり改造したりしないでください。
- 極端な温度や直射日光を避けて保管してください。
- イヤホンを落としたり、強い衝撃を与えたりしないでください。
- 研磨剤入りの洗剤や強力な化学薬品は使用しないでください。
- 地域の規制に従ってバッテリーを廃棄してください。
- Prolonged listening at high volumes can cause hearing damage.