1。 オーバーview
The Visual Land Soundwave A1 Active Noise Cancelling Earbuds provide a high-quality audio experience with advanced features designed for comfort and convenience. These earbuds feature 6-microphone Active Noise Cancellation, up to 40 hours of total playtime, fast charging capabilities, and an IPX5 water-resistant rating, making them suitable for various activities and environments.
主な機能は次のとおりです。
- アクティブノイズキャンセリング (ANC): 6-mic system for superior ambient noise reduction.
- 長時間プレイ: 充電ケースを使用すると合計最大 40 時間の再生が可能です。
- 急速充電: 15 分の充電で最大 5 時間の再生が可能です。
- IPX5防水: 汗や軽い水しぶきから保護します。
- タッチコントロール: Intuitive controls for audio playback and call management.
- 快適なフィット感: Includes 3 ear tip sizes for a secure and comfortable fit.
2. 箱の中身
パッケージの内容をチェックして、すべてのアイテムが揃っていることを確認してください。
- Visual Land Soundwave A1 Earbuds (Left and Right)
- 充電ケース
- 追加のイヤーチップ(各種サイズ)
- USB-C充電ケーブル
- 説明書(このマニュアル)
3.製品コンポーネント
Familiarize yourself with the different parts of your Visual Land Soundwave A1 Earbuds and charging case.

Image 1: Visual Land Soundwave A1 Earbuds inside their open charging case, showing the earbuds and three illuminated LED battery indicators.

Image 2: A pair of Visual Land Soundwave A1 Earbuds shown from a side angle, highlighting their ergonomic design and ear tips.
4. セットアップ
4.1 イヤホンとケースの充電
Before first use, fully charge the earbuds and charging case. The case provides additional power for extended listening.
- イヤホンを充電ケースに入れます。それぞれのスロットに正しく装着されていることを確認してください。
- USB-C 充電ケーブルをケースの充電ポートに接続し、もう一方の端を USB 電源 (壁のアダプター、コンピューターの USB ポートなど) に接続します。
- The LED indicators on the charging case will illuminate to show charging status. A full charge typically takes approximately 1.5-2 hours for the case and earbuds.
- The earbuds support fast charging: 15 minutes of charging can provide up to 5 hours of playtime. The total playtime with a fully charged case is up to 40 hours.
4.2Bluetoothペアリング
イヤホンをデバイスとペアリングするには、次の手順に従います。
- イヤホンが充電されていることを確認します。
- 充電ケースを開けると、イヤホンは自動的にペアリングモードになり、インジケーターライトが点滅します。
- デバイス(スマートフォン、タブレット、コンピューター)で、Bluetooth 設定に移動します。
- 検索する available devices and select "Visual Land Soundwave A1" from the list.
- 接続されると、イヤホンのインジケータ ライトの点滅が停止し、確認音が聞こえます。
- デバイスで Bluetooth が有効になっている場合、イヤホンはケースから取り出すと最後にペアリングしたデバイスに自動的に再接続されます。
5. イヤホンの操作
5.1 タッチコントロール
The Visual Land Soundwave A1 Earbuds feature intuitive touch controls on each earbud. The specific functions may vary slightly, but common controls are:
- シングルタップ: 音楽の再生/一時停止、通話の応答/終了。
- ダブルタップ (左イヤホン): 前のトラック。
- ダブルタップ (右イヤホン): 次のトラック。
- トリプルタップ (どちらかのイヤホン): 音声アシスタントをアクティブにします。
- 長押し(左イヤホン): 音量を下げます。
- 長押し(右イヤホン): 音量を上げます。
- 長押し(どちらかのイヤホンを2秒間): ANC、透明モード、通常モードを切り替えます。
- Long Press (Either Earbud during incoming call): 着信を拒否します。
Note: Refer to the quick start guide included in your package for the most precise touch control mapping.
5.2 アクティブノイズキャンセリング(ANC)と透過モード
The Soundwave A1 earbuds offer three listening modes:
- アクティブノイズキャンセリング (ANC): 周囲のノイズを低減し、没入感のあるリスニング体験を実現します。旅行や騒がしい環境に最適です。
- 透明モード: Allows you to hear your surroundings while still enjoying your audio. Useful for awareness in urban areas or when interacting with others.
- 通常モード: Standard listening mode without active noise cancellation or transparency features.
To switch between these modes, perform a long press on either earbud for approximately 2 seconds until you hear an audible prompt indicating the mode change.
Video 1: An official product video demonstrating the Active Noise Cancellation feature and immersive sound experience of the Visual Land Soundwave A1 Earbuds.
6. メンテナンス
6.1 クリーニング
定期的な清掃は最適なパフォーマンスと衛生を維持するのに役立ちます。
- 柔らかく乾いた糸くずの出ない布を使用して、イヤホンと充電ケースを拭いてください。
- For ear tips, gently remove them from the earbuds and clean with a mild soap solution if necessary, then rinse thoroughly and dry completely before reattaching.
- 研磨剤、アルコール、化学洗剤の使用は避けてください。
- 両方のイヤホンとケースの充電接点が清潔でゴミがないことを確認してください。
6.2 耐水性
The earbuds are IPX5 water-resistant, meaning they can withstand light splashes and sweat. They are not designed for submersion in water. Do not use them while swimming or showering. Ensure earbuds are dry before placing them back into the charging case to prevent damage.
6.3 ストレージ
使用しないときは、イヤホンを保護し、充電を保つために充電ケースに保管してください。高温多湿を避け、涼しく乾燥した場所に保管してください。
7。 トラブルシューティング
イヤホンに問題が発生した場合は、次の解決策を試してください。
- イヤホンがペアリングされない:
- イヤホンが充電されていることを確認してください。
- デバイスの Bluetooth をオフにしてから、再度オンにします。
- Forget "Visual Land Soundwave A1" from your device's Bluetooth list and try pairing again.
- イヤホンをケースに戻し、蓋を閉じて数秒待ってから開けて、ペアリング モードを再度開始します。
- 片方または両方のイヤホンから音が出ない:
- デバイスとイヤホンの音量レベルを確認してください。
- イヤホンがデバイスに正しく接続されていることを確認してください。
- イヤホンのスピーカーとイヤーチップに付いたゴミを取り除きます。
- Try resetting the earbuds (refer to the full manual or manufacturer's web必要に応じて、具体的なリセット手順についてはサイトを参照してください。
- 充電に関する問題:
- USB-C ケーブルがケースと電源の両方にしっかりと接続されていることを確認します。
- 別の USB-C ケーブルと電源アダプターを試してください。
- イヤホンとケース内部の充電接点を清掃してください。
- 音質が悪い、または接続が切れる:
- 干渉を減らすには、ペアリングしたデバイスに近づいてください。
- イヤホンとデバイスの間に物理的な障害物がないことを確認してください。
- デバイスを再起動します。
If problems persist, please contact Visual Land customer support.
8. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル名 | SOUNDWAVE A1 V2 |
| Bluetoothバージョン | 5.3 |
| 騒音制御 | アクティブノイズキャンセル(ANC) |
| マイク | 6マイクシステム |
| 総プレイ時間 | 最大40時間(充電ケース付き) |
| 急速充電 | 15分の充電で5時間の再生が可能 |
| 耐水性 | IPX5 |
| 制御方法 | 触る |
| 接続性 | ワイヤレス(Bluetooth) |
| 耳の位置 | 耳に装着 |
| 材料 | プラスチック |
| アイテム重量 | 2オンス |
| 含まれるコンポーネント | Earbuds, Charging Case, Additional Ear Tips, USB-C Charging Cable, Instructions |
9. 安全情報
安全な操作を確保し、イヤホンの寿命を延ばすために、以下の安全ガイドラインを読んで従ってください。
- 聴覚保護: 聴覚障害を防ぐため、長時間大音量で聞くことは避けてください。
- 環境への意識: Do not use earbuds in situations where inability to hear surroundings could be dangerous (e.g., driving, cycling, walking in traffic). Use Transparency Mode when awareness is needed.
- 水への露出: The earbuds are IPX5 water-resistant, not waterproof. Do not submerge them in water or expose them to heavy rain. Ensure they are dry before charging.
- 窒息の危険: Keep earbuds and small parts away from children and pets.
- バッテリーの安全性: Do not attempt to replace the battery yourself. Do not expose the product to extreme temperatures, direct sunlight, or fire. Dispose of batteries according to local regulations.
- クリーニング: Only clean with a dry, soft cloth. Avoid harsh chemicals.
10. 保証とサポート
Visual Land products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Visual Land webサイト。
For technical support, troubleshooting assistance, or general inquiries, please contact Visual Land customer service through their official webサイトまたは製品パッケージに記載されている連絡先情報を参照してください。
メーカー: ビジュアルランド