3M PELTOR Comtac Earmuff Instruction Manual

導入

The 3M PELTOR Comtac Earmuff is a tactical communications and hearing protection headset designed to provide both auditory situational awareness and protection from hazardous noise levels. This manual provides essential information for the proper setup, operation, and maintenance of your Comtac earmuffs to ensure optimal performance and longevity.

安全情報

Always read and understand all safety warnings and instructions before using this product. Improper use can result in hearing damage or other injuries.

• 聴覚保護: This device helps protect against hazardous steady-state and impulse noise. Ensure the earmuffs are properly fitted to achieve the stated Noise Reduction Rating (NRR).
• 環境への意識: While the talk-through function enhances situational awareness, always remain vigilant in noisy environments.
• バッテリーの安全性: Use only specified batteries. Do not mix old and new batteries or different types of batteries. Dispose of batteries according to local regulations.
• 提案65の警告: 本製品には、カリフォルニア州でがん、先天性欠損症、その他の生殖機能障害を引き起こすことが知られている化学物質が含まれている可能性があります。詳細については、 www.p65warnings.ca.gov.

パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• 3M PELTOR Comtac Earmuff
• AAA Batteries (2 per ear, included)
• 取扱説明書（本書）

設定

1. バッテリーの取り付け

The Comtac earmuffs require two AAA batteries per ear cup (total of four AAA batteries). Batteries are typically included with the product.

1. Gently remove the ear cushion from each ear cup. This usually involves carefully prying it off the rim of the ear cup. Some users find this step requires moderate force, but the design allows for removal without damage.
2. バッテリー収納部を見つけます。
3. Insert two AAA batteries into each compartment, ensuring correct polarity (+/-).
4. Carefully reattach the ear cushions, ensuring they are securely seated around the ear cup rim.

図1：側面 view of the earmuff on a head, illustrating proper fit and ear cup placement.

2. Fitting the Earmuffs

Proper fit is crucial for both hearing protection and comfort.

1. Adjust the headband to fit comfortably over your head. The headband is typically metal and designed for durability.
2. Ensure the ear cups fully enclose your ears, creating a tight seal around them. Adjust the height of the ear cups on the headband as needed.
3. If wearing with other headgear (e.g., helmets), ensure the earmuffs maintain a proper seal. The design allows for fitting under various tactical helmets.

図2: 前面 view of the 3M PELTOR Comtac Earmuff, highlighting the overall design and components.

操作手順

1. 電源のオン/オフと音量調節

Each ear cup typically has independent power and volume controls.

• Press and hold the power button (often integrated with volume controls) to turn the unit on or off.
• Use the '+' and '-' buttons to adjust the volume of the environmental listening feature.
• The left and right sides operate independently, allowing for individual volume adjustment if needed.

2. Environmental Listening (Talk-Through)

The Comtac earmuffs feature an environmental listening function, also known as "talk-through," which allows you to hear your surroundings and engage in face-to-face conversations while still being protected from loud noises.

• Microphones on the ear cups pick up ambient sounds, which are then reproduced inside the earmuffs.
• When a loud noise occurs, the system instantly reduces the volume to a safe level, then restores normal listening once the hazardous noise subsides. This compression technology ensures continuous situational awareness without abrupt sound cut-offs.

3. Two-Way Communications

For models equipped with communication capabilities (e.g., single or dual comm variants), the headset allows for clear, intelligible two-way audio communications via radios and intercoms. The Hearing Defender variant can be upgraded with communication downleads and boom mics (sold separately) to enable this functionality.

4. Advanced Audio Settings

The Comtac earmuffs offer advanced audio adjustments for specific situations:

• ゲインブースト: に amplify quiet sounds or maintain audibility when wearing inner earplugs, hold the volume up button for approximately ten seconds after turning on the headset. This boosts the gain significantly.
• 周波数応答調整: By holding the volume down button, you can adjust the frequency response of the headset. This allows you to tailor the sound profileたとえばample, by boosting lows if highs are too sharp, enhancing comfort during prolonged exposure to constant noise.

メンテナンス

1.クリーニングと保管

Proper care ensures the longevity and performance of your earmuffs.

• イヤーマフを広告できれいにするamp 布。
• Allow them to air dry completely before storage.
• 涼しく乾燥した場所に保管してください。
• Avoid extreme temperatures and direct sunlight, which can degrade materials.

2. Replacing Ear Cushions and Headband Cover

The ear cups and headband cover are designed to be replaceable, contributing to the product's long-term usability.

• イヤークッション: To replace, gently pry off the old cushion from the ear cup. Align the new cushion and press it firmly around the rim until it snaps into place, ensuring a secure seal.
• Headband Cover: The headband cover can also be replaced. Refer to specific replacement kit instructions for detailed steps.

トラブルシューティング

• Difficulty with Battery Replacement: If you find it challenging to remove or reattach the ear cushions for battery access, apply steady, even pressure. The cushions are designed to be removed and reinstalled, though they require a firm pull to ensure a tight seal during use. Avoid excessive force that could damage the plastic.
• 音が出ない、または音量が小さい:
  • Check battery levels and ensure they are inserted with correct polarity.
  • Replace all batteries if they are old or depleted.
  • Ensure the earmuffs are powered on and volume is adjusted appropriately for both sides.
• Static Interference or Glitches:
  • 電池が新しく、正しく装着されていることを確認してください。
  • If issues persist, try replacing all batteries.
  • Contact 3M customer support if the problem continues after basic troubleshooting.
• Poor Hearing Protection:
  • Ensure ear cups form a complete seal around your ears. Adjust headband and ear cup position.
  • Check ear cushions for wear or damage; replace if necessary.
  • Consider using inner earplugs in conjunction with the earmuffs for additional protection in extremely loud environments.

仕様

保証とサポート

For warranty information, technical support, or service inquiries, please contact 3M customer service directly. Retain your proof of purchase for warranty claims.

3Mの公式ウェブサイトをご覧ください web最新のサポート リソースと連絡先情報については、次のサイトをご覧ください。 3mについて