導入
This manual provides comprehensive instructions for the setup, operation, and maintenance of your HyperX Cloud III Wireless Gaming Headset and HyperX QuadCast S RGB USB Condenser Microphone. This bundle is designed to provide a superior audio experience for gaming, streaming, and communication across various platforms.
Image: The HyperX Cloud III Wireless Headset and HyperX QuadCast S Microphone, shown together as a complete bundle.
パッケージ内容
- HyperX Cloud III ワイヤレスゲーミングヘッドセット
- Detachable Microphone for Cloud III
- USBワイヤレスドングル
- USB-C充電ケーブル
- HyperX QuadCast S RGB USB Condenser Microphone
- USB Cable for QuadCast S
- Mount Adapter for QuadCast S (3/8” and 5/8” thread sizes)
- クイックスタートガイド（本書）
設定
HyperX Cloud III Wireless Headset Setup
- ヘッドセットの充電： Connect the USB-C charging cable to the headset's charging port and to a powered USB port. The LED indicator will show charging status. A full charge takes approximately 4.5 hours.
- デバイスに接続中:
- Insert the USB wireless dongle into an available USB port on your PC, PS5, PS4, or Nintendo Switch.
- Power on the headset by pressing and holding the power button. The headset will automatically connect to the dongle.
- For mobile devices, ensure your device supports USB-C audio output or use an appropriate adapter if needed.
- マイクの取り付け: Insert the detachable 10mm microphone into the microphone jack on the headset. Ensure it is securely seated.
画像: クローズアップ view of the HyperX Cloud III Wireless Headset, highlighting the earcups and the detachable microphone.
HyperX QuadCast S Microphone Setup
- 配置: Place the QuadCast S microphone on a stable, flat surface using its integrated stand, or attach it to a compatible boom arm using the included mount adapter.
- デバイスに接続中: Connect the USB cable from the QuadCast S microphone to an available USB port on your PC, PS4, PS5, or Mac. The microphone will be automatically recognized by most operating systems.
- ソフトウェアのインストール（オプションですが推奨）: For full customization of RGB lighting and other settings, download and install the HyperX NGENUITY software from the official HyperX webサイト。
画像: 詳細な view of the HyperX QuadCast S RGB USB Condenser Microphone, showcasing its design and integrated shock mount.
操作手順
HyperX Cloud III Wireless Headset Operation
- 電源オン/オフ: Press and hold the power button on the earcup to turn the headset on or off.
- 音量コントロール: Use the volume wheel located on the earcup to adjust audio output levels.
- マイクミュート: Press the microphone mute button on the earcup to mute or unmute the microphone. An LED indicator on the microphone will show its status.
- バッテリー寿命: The headset offers up to 120 hours of battery life on a single charge. Monitor battery status via the headset's LED indicator or HyperX NGENUITY software.
- DTSヘッドフォン:X空間オーディオ: Activate and configure DTS Headphone:X Spatial Audio through the HyperX NGENUITY software for enhanced sound localization.
Image: A person wearing the HyperX Cloud III Wireless Headset, illustrating the long battery life and 2.4GHz wireless connectivity for extended gaming sessions.
Image: A person comfortably wearing the HyperX Cloud III Wireless Headset, emphasizing the comfort provided by HyperX signature memory foam and premium leatherette.
HyperX QuadCast S Microphone Operation
- タップしてミュート: Tap the top of the microphone to instantly mute or unmute. The LED indicator will change to show the microphone's status (on/off).
- ゲインコントロール： Use the gain control dial at the bottom of the microphone to adjust input sensitivity.
- 極性パターン： Select from four polar patterns (Stereo, Omnidirectional, Cardioid, Bidirectional) using the dial on the back of the microphone to optimize for different recording situations.
- RGB照明: Customize the dynamic RGB lighting effects using the HyperX NGENUITY software.
- ヘッドフォンジャック： Use the 3.5mm headphone jack on the back of the microphone for real-time monitoring of your audio.
Image: The HyperX QuadCast S Microphone demonstrating its tap-to-mute sensor with an LED status indicator, showing both active and muted states.
Image: The HyperX QuadCast S Microphone displayed alongside a computer screen showing the HyperX NGENUITY software interface, illustrating customization options for RGB lighting and effects.
メンテナンス
- クリーニング： Use a soft, dry cloth to clean the surfaces of the headset and microphone. Avoid using harsh chemicals or abrasive materials.
- ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- ケーブルのお手入れ: 損傷を防ぐため、USB ケーブルを極端に曲げたり、ねじったりしないでください。
- イヤークッション: The ear cushions are designed for durability, but gentle cleaning can extend their lifespan.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ヘッドセットからの音声がありません | Headset not powered on; Dongle not connected; Low battery; Incorrect audio output selected. | Ensure headset is powered on and charged. Verify USB dongle is securely connected. Check audio output settings on your device. |
| Microphone not working (headset) | Microphone muted; Not properly attached; Incorrect input device selected. | Press the mute button to unmute. Re-attach the microphone firmly. Select the headset microphone as the input device in your system settings. |
| QuadCast S microphone not detected | USB cable loose or faulty; Incorrect input device selected; Driver issue. | Ensure USB cable is securely connected. Try a different USB port. Check system sound settings to select QuadCast S as input. Reinstall HyperX NGENUITY software if necessary. |
| Poor audio quality (QuadCast S) | Incorrect polar pattern; Gain too high/low; Environmental noise. | Adjust the polar pattern to suit your recording environment. Adjust the gain control dial. Ensure you are speaking directly into the correct side of the microphone for the selected pattern. |
| RGB lighting not working (QuadCast S) | NGENUITY software not running; Software settings incorrect. | Ensure HyperX NGENUITY software is installed and running. Check lighting settings within the software. |
仕様
HyperX Cloud III ワイヤレスヘッドセット
- モデル名: クラウドⅢ
- 接続性: 2.4GHzワイヤレス（RF）
- ドライバー: 53mm Angled Dynamic Drivers
- 周波数応答: 10Hz-21kHz
- バッテリー寿命: 最大120時間
- 充電時間: 約4.5時間
- 材料： Memory foam, Leatherette
- マイクロフォン： Detachable 10mm Noise-Cancelling
- コントロールタイプ: 音量コントロール、マイクミュート
- 対応デバイス: PC, PS5, PS4, Nintendo Switch, Mobile
HyperX QuadCast S RGB USB Condenser Microphone
- タイプ： USBコンデンサーマイク
- 極性パターン： ステレオ、無指向性、カーディオイド、双方向
- 特徴： Anti-vibration shock mount, Built-in pop filter, Tap-to-mute sensor with LED indicator, Gain control dial, RGB lighting (customizable via NGENUITY)
- ヘッドフォン出力: 3.5mm jack for real-time monitoring
- マウントアダプター: Compatible with 3/8” and 5/8” thread sizes
- 対応デバイス: PC、PS4、PS5、Mac
保証とサポート
HyperX products are backed by a limited warranty. For detailed warranty information, technical support, and customer service, please visit the official HyperX website or contact their support team. Keep your proof of purchase for warranty claims.
さらにサポートが必要な場合は、次のサイトをご覧ください。 www.hyperx.com/support