製品終了view
The InSinkErator HOT250 Instant Hot and Cold Water Dispenser System, paired with the F-2000S Premium Under Sink Water Filtration System, provides convenient access to near-boiling hot water and filtered cold water directly from your kitchen sink. This system is designed for efficiency and ease of use, enhancing your daily kitchen tasks.
図1：以上view of the InSinkErator HOT250 Instant Hot and Cold Water Dispenser System and F-2000S Filtration System components.
主な特徴:
- インスタントお湯: Delivers approximately 200°F water on demand for beverages, cooking, and cleaning.
- Filtered Cold Water: The F-2000S filtration system reduces particulates, chlorine taste and odor, and various contaminants for great-tasting cold water.
- 調節可能な温度： The 2/3-gallon stainless steel tank allows for temperature adjustment.
- 簡単なインストール: Designed for DIY installation with standard sink hole requirements and tool-free tank connections.
- Dry Start Protection: Ensures safety by preventing damage if the tank is accidentally plugged in without water.
安全情報
Please read and understand all safety instructions before installing, operating, or performing maintenance on this product. Failure to follow these instructions could result in electric shock, fire, serious injury, or death.
- ユニットを保守する前に、必ず電源を切断してください。
- 電源コードまたはプラグが損傷している場合は、ユニットを操作しないでください。
- 感電を防ぐために適切な接地を確保してください。
- Hot water can cause severe burns. Exercise caution when dispensing.
- Install the unit in an area protected from freezing temperatures.
- Use only genuine InSinkErator replacement parts and filters.
コンポーネントと部品
The InSinkErator HOT250 system includes the following main components:
- HOT250 Faucet (Satin Nickel)
- 750-watt, 2/3-gallon Stainless Steel Hot Water Tank
- F-2000S Premium Under Sink Water Filtration System (includes F-2000 filter and twist-&-lock quick-connect filter head)
- 設置用ハードウェアとチューブ
Figure 2: The HOT250 faucet and the instant hot water tank.
Figure 3: The F-2000S Premium Under Sink Water Filtration System, including the filter cartridge and connection tubing.
セットアップとインストール
Installation of the InSinkErator HOT250 and F-2000S system is designed to be a straightforward DIY process. It typically requires a standard 1 3/8-inch hole for the faucet and an under-sink electrical outlet for the tank's power cord. The tank connections are tool-free for convenience.
インストールのステップオーバーview:
- Prepare Sink Area: Ensure adequate space under the sink for the tank and filter. Confirm a standard 1 3/8-inch faucet hole is available or create one.
- Mount Faucet: Secure the HOT250 faucet to the sink or countertop.
- Mount Tank: Hang the hot water tank securely under the sink using the provided mounting bracket.
- 水道管を接続する: Connect the cold water supply to the filter, and then connect the filtered water line to the tank. Connect the hot water line from the tank to the faucet.
- 接続電源： Plug the tank into a grounded electrical outlet. The dry start protection feature prevents damage if the tank is plugged in before being filled with water.
- フラッシュシステム: Before first use, flush the system to remove air and any carbon fines from the filter.
Video 1: A detailed look at the installation process for the InSinkErator hot water dispenser, highlighting key connection points and ease of setup.
ビデオ2: オーバーview of the InSinkErator hot water dispenser, discussing its features and installation considerations.
操作手順
The HOT250 faucet features a two-handle design for dispensing both hot and cold water. The hot water handle includes a spring-back mechanism for safety.
水の供給:
- お湯: Push the hot water handle (typically on the right) back and down to dispense near-boiling water. Release the handle to stop the flow.
- 冷水: Push the cold water handle (typically on the left) forward and down to dispense filtered cold water. Release the handle to stop the flow.
Figure 4: Dispensing near-boiling water for hot beverages like tea.
Figure 5: The system offers endless possibilities for cooking, cleaning, and preparing beverages.
温度調整：
The hot water tank features an adjustable thermostat. To change the water temperature, locate the dial on the front of the tank and rotate it to your desired setting (Min to Max).
メンテナンス
Regular maintenance ensures optimal performance and longevity of your InSinkErator system.
フィルターの交換:
The F-2000S filter should be replaced every 6 months for optimal performance and water quality. The twist-&-lock quick-connect filter head makes replacement easy.
- フィルターへの冷水の供給をオフにします。
- 古いフィルターカートリッジを反時計回りに回して取り外します。
- Insert the new F-2000 filter cartridge and twist clockwise until secure.
- Turn the cold water supply back on and flush the system for a few minutes.
Figure 6: Close-up of the F-2000 filter cartridge, which should be replaced every six months.
クリーニング：
- 蛇口の外側を柔らかくて柔らかい布で拭いてください。amp 布と中性洗剤を使用してください。研磨剤入りの洗剤は使用しないでください。
- Periodically check under the sink for any leaks or signs of wear on the hoses and connections.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| お湯が出ない | Power not connected; Tank not filled; Thermostat set too low. | Check power connection; Ensure water supply is on and tank is full; Adjust thermostat to a higher setting. |
| 水が十分に熱くない | Thermostat set too low; Heavy usage. | Increase thermostat setting; Allow time for tank to reheat between uses. |
| 水の流れが遅い | Clogged filter; Kinked water line. | Replace F-2000 filter; Check water lines for kinks or obstructions. |
| 接続部からの漏れ | 接続が緩んでいる、O リングが損傷している。 | Tighten connections (do not overtighten); Inspect and replace O-rings if damaged. |
仕様
- ブランド： InSinkErator
- モデル名: ホット250
- ASIN: B0CR9VYGXB
- 色： サテンニッケル
- 温水タンク容量: 2/3 Gallon (2.84 Liters)
- Tank Wattage: 750ワット
- 特集: Chlorine Reduction (with F-2000S filter)
- 蛇口の寸法: 8.21-inch H x 3.96-inch W (approximate)
- フィルタータイプ: F-2000S Premium Under Sink Water Filtration System
保証とサポート
For detailed warranty information and customer support, please refer to the official InSinkErator web購入サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証請求のために購入証明書を保管してください。
オンラインサポート： www.insinkerator.com/en-us/support
電話サポート: Refer to your product registration card or the InSinkErator web地域の連絡先番号のサイト。
