1.製品オーバーview
The HYPERLITE 4FT LED Vapor Tight Light Fixture, Model HP-HB-AJ01, is designed for demanding environments requiring robust and efficient lighting. This fixture offers selectable wattage and color temperature options, providing versatility for various applications. Its sealed construction ensures protection against dust, moisture, and water spray.
主な特徴:
- 選択可能なワットtage: Choose between 45W, 55W, or 65W to adjust brightness and energy consumption.
- 選択可能な色温度: Adjust between 4000K (Neutral White), 5000K (Daylight White), and 6000K (Cool White).
- 高輝度： Delivers up to 8645 lumens at maximum wattage.
- ワイドVoltage範囲： Operates on AC100-277V.
- IP65 定格: Provides protection against dust and water jets, suitable for wet locations.
- ETL 認定: 北米の安全基準への準拠を保証します。
- 調光可能: Compatible with 1-10V dimmers (dimmer not included).
- 耐久性のある構造: Features a polycarbonate housing, silicone rubber gaskets, and metal latches for enhanced sealing.
用途: Ideal for car washes, garages, freezers, food packaging facilities, stores, barns, docks, and warehouses.
図1：以上view of the fixture's selectable features and certifications.
2. 安全情報
Please read and understand all instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.
- 電気安全: Always disconnect power at the circuit breaker or fuse box before installation, maintenance, or cleaning. Ensure proper grounding to avoid potential electric shock.
- 有資格者： Installation and wiring should be performed by a qualified electrician in accordance with all national and local electrical codes.
- 巻tage互換性： 供給量を確認するtageは器具の動作電圧と互換性があるtag（AC100-277V）。
- 取り扱い： Handle the fixture with care. Avoid dropping or subjecting it to severe impact.
- 動作温度: Ensure the operating environment's temperature is within the specified range for the fixture.
- 変更点: 器具またはその部品を改造しないでください。許可されていない改造は保証の対象外となり、安全上の危険が生じる可能性があります。
3. セットアップとインストール
The HYPERLITE LED Vapor Tight Light Fixture is designed for straightforward installation on ceilings or walls. Mounting hardware is included.
含まれるコンポーネント:
- LED Vapor Tight Light Fixture
- 取り付けブラケット
- ネジと壁アンカー
- ワイヤーナット
インストール手順:
- インストールの準備： Ensure power is disconnected at the circuit breaker. Unpack the fixture and inspect for any damage.
- 取り付け位置をマークする: Use the included mounting brackets as a template to mark the desired drilling locations on the ceiling or wall.
- 取り付けブラケットを取り付けます。 Drill pilot holes at the marked locations. Secure the mounting brackets using the provided screws and wall anchors. Ensure the brackets are firmly attached.
- 取り付け具: Open the latches on the fixture. Snap the fixture shell into the installed mounting brackets. Close the latches to secure the fixture.
- 配線： The fixture comes with pre-wired cables. Connect the fixture's wires to the main power supply wires using appropriate wire nuts. Ensure correct polarity (Live, Neutral, Ground).
- Reinforce (Optional): For added security, use the nut reinforcement installation method if desired, as shown in Figure 2.
- 電力を回復する： Once installation and wiring are complete and secure, restore power at the circuit breaker.
Figure 2: Quick installation steps for the LED vapor tight light.
Figure 3: Mounting options for the fixture.
4. 操作手順
The HYPERLITE LED Vapor Tight Light Fixture offers adjustable wattage and color temperature settings to customize your lighting experience.
ワットの調整tagおよび色温度:
The fixture features an adjustable switch located on the LED driver inside the unit. To access this switch:
- 電源を切る: Ensure power to the fixture is turned off at the circuit breaker before making any adjustments.
- オープンフィクスチャー: Carefully unlatch and open the fixture housing to expose the internal components.
- Locate Switches: Identify the small switches on the LED driver. There will be separate switches for wattage（45W/55W/65W）および色温度（4000K/5000K/6000K）を選択できます。
- 設定を選択: Use a small tool (e.g., a screwdriver) to carefully slide the switches to your desired wattageと色温度。
- クローズフィクスチャ: Securely close the fixture housing, ensuring all latches are properly engaged to maintain the IP65 seal.
- 電力を回復する： 回路ブレーカーで電源を再度オンにします。
Note: Default settings are typically 65W and 5000K CCT.
Figure 4: Location of adjustable switches on the LED driver.
Figure 5: Visual representation of selectable color temperatures and dimming capabilities.
調光機能:
This fixture is compatible with 1-10V dimmers (not included). To utilize the dimming feature, connect a compatible 1-10V dimmer to the fixture's dimming wires during installation. Follow the dimmer manufacturer's instructions for wiring and operation.
Figure 6: Dimmable functionality overview.
5. メンテナンス
The HYPERLITE LED Vapor Tight Light Fixture is designed for minimal maintenance due to its durable and sealed construction.
- クリーニング： 定期的に器具の外側を柔らかくて乾いた布で掃除してください。amp cloth. Avoid using abrasive cleaners or solvents that could damage the polycarbonate housing. Ensure power is disconnected before cleaning.
- 検査： Regularly inspect the fixture for any signs of physical damage, loose connections, or compromised seals. Address any issues promptly to maintain performance and safety.
- シールの完全性: The IP65 rating relies on the integrity of the seals. Ensure the latches are always securely closed after any internal adjustments or inspections.
Figure 7: Illustration of the fixture's sealing protection.
6。 トラブルシューティング
If you encounter issues with your HYPERLITE LED Vapor Tight Light Fixture, refer to the following troubleshooting guide:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しない | 電源なし 配線が緩んでいる フィクスチャの不良 | 回路ブレーカーと電源を確認してください。 Verify all wire connections are secure (ensure power is off). Contact customer support if power and wiring are confirmed correct. |
| 光がちらつく | 不安定な電力供給 配線が緩んでいる 互換性のない調光器（該当する場合） | Ensure stable power. Test with a different circuit. すべての配線接続を確認してください。 Verify dimmer compatibility and proper installation. |
| Incorrect brightness/color temperature | Switches set incorrectly Dimmer setting (if applicable) | Disconnect power, open fixture, and adjust wattage/CCT switches to desired settings. Adjust dimmer to desired brightness level. |
| Water or dust inside fixture | Improperly sealed housing ガスケットの損傷 | Ensure latches are fully closed and housing is properly seated. Inspect gaskets for damage and replace if necessary. |
If the problem persists after following these steps, please contact HYPERLITE customer support.
7. 仕様
Detailed technical specifications for the HYPERLITE 4FT LED Vapor Tight Light Fixture (Model HP-HB-AJ01).
| 仕様 | 価値 |
|---|---|
| ブランド | ハイパーライト |
| モデル名 | LED 気密ライト |
| 商品型番 | HP-HB-AJ01 |
| 製品寸法（長さ x 幅 x 高さ） | 47.2インチ x 3.7インチ x 3.1インチ |
| アイテム重量 | 4.79ポンド |
| ワットtage | 45W/55W/65W（選択可能） |
| 輝度 | 最大8645ルーメン |
| 色温度 | 4000K/5000K/6000K (Selectable) |
| 巻tage | AC100-277V |
| 耐水性レベル | （防水）IP65 |
| 材料 | Polycarbonate (Shade: Acrylic) |
| インストールタイプ | Flush Mount (Ceiling Mount, Wall Mount) |
| 特集 | Adjustable Color Temperature, Dimmable (1-10V), Energy Efficient, Waterproof |
| 認証 | 電子商取引 |
| 含まれるコンポーネント | 取り付け金具 |
図 8: 製品の寸法と付属品。
8. 保証とサポート
HYPERLITE is committed to providing high-quality products and excellent customer service.
保証情報:
This HYPERLITE LED Vapor Tight Light Fixture comes with a 36ヶ月（3年）の限定保証 ご購入日から1年間有効です。本保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。
カスタマーサポート:
For technical assistance, troubleshooting, or warranty inquiries, please contact HYPERLITE customer support:
- メールサポート: 24-hour response time.
- 電話サービス: 12-hour availability.
Please visit the official HYPERLITE web具体的な連絡先の詳細については、サイトをご覧いただくか、購入書類を参照してください。