1. はじめに
The Muzata U116 LED Channel is engineered to deliver a spotless neon lighting effect when used with compatible LED strips. This black aluminum channel, featuring a milky white cover, provides an elegant and high-end lighting appearance. Its innovative hanging design offers versatile installation options, expanding creative lighting possibilities for various indoor spaces.
For optimal 'spotless' effect, it is recommended to use LED strips with a density of at least 96 LEDs per meter, such as Muzata AC1L, AC1T, or SH3L LED strips. The channel is 17mm wide, accommodating LED strips up to 17mm, including waterproof variants.
Figure 1: Muzata U116 LED Channel components and an example of hanging LED lighting.
2. パッケージ内容
パッケージにすべてのコンポーネントが含まれていることを確認します。
- 5 x LED Channel (3.3FT/1M each)
- 5 x LED Cover (Milky White)
- 10 x Hanging Wire Rope
- エンドキャップ5個
- 5 x End Cap with Hole
- 10x取り付けクリップ
- ネジ10本
Figure 2: All included components for the Muzata U116 LED Channel system.
3. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 116代 |
| 色 | Black Channel, Milky White Cover |
| 材料 | アルミニウム |
| チャネル長 | 3.3 FT (1 Meter) per piece |
| 内幅 | 17mm (fits LED strips within 17mm) |
| 使用法 | 屋内 |
| 特集 | Spotless Effect, Heat Dissipation, Dust/Moisture Protection |
| アイテム重量 | 3.09ポンド（5パック） |
4. セットアップとインストール
Follow these steps to install your Muzata U116 LED Channel system:
- LED ストリップを準備します。 Ensure your LED strip is clean and ready for installation. For a spotless effect, use LED strips with at least 96 LEDs/meter.
- LEDストリップを挿入します: Carefully stick the LED light strip into the aluminum channel.
- カバーを取り付ける: Press the milky white cover firmly into the channel until it snaps securely into place.
- エンドキャップの取り付け: Attach the appropriate end caps to both ends of the channel. Use the end cap with a hole for the hanging wire side.
- Prepare Hanging Wire: Pass the fixed end of the hanging wire rope through the designated hole in the end cap.
- Secure Wire to Channel: Slide the wire's attachment mechanism into the channel's groove and tighten it to secure the channel.
- 吊り下げ高さの調整: If necessary, use a cable cutter (CR12 recommended) to trim the hanging wire rope to your desired length.
- 天井への取り付け: Insert the screws into the sleeve of the ceiling mount and securely fasten it to the ceiling.
- Connect Wire to Ceiling Mount: Insert the free end of the wire rope into the fixing parts of the ceiling mount. To adjust the wire rope length, simultaneously press the end and the protruding part of the fixing mechanism to disengage the cable.
Figure 3: Visual guide for hanging installation.
インストールビデオガイド
Video 1: Official Muzata installation guide for the hanging LED channel, demonstrating the steps for creating ambient lighting.
5. 操作手順
Once installed, connect your LED strip to a compatible power source and controller (not included with the channel system). The channel itself is a passive component designed to house and diffuse light from your LED strips.
For the best 'spotless' effect, ensure your chosen LED strips have a high density of LEDs, ideally 96 LEDs per meter or more. Lower density strips may still show individual LED dots through the milky white cover.
Figure 4: Achieving a truly spotless neon effect with appropriate LED strip density.
6. メンテナンス
To ensure longevity and optimal performance of your LED channel and strips:
- クリーニング： Gently wipe the aluminum channel and milky white cover with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth can be used, ensuring no moisture enters the channel where the LED strip is housed.
- 保護： The aluminum channel is anodized, providing excellent heat dissipation to prolong the lifespan of your LED strips. The thicker LED cover also protects your LED strip from dust, hair, and moisture, which can cause discoloration or damage over time.
- 検査： Periodically check the hanging wires and mounting points for any signs of wear or loosening to ensure secure installation.
7。 トラブルシューティング
- LEDが点灯しない: Ensure the LED strip is correctly connected to its power supply and controller. Check all electrical connections.
- Uneven light or visible spots: This typically indicates that the LED strip used has a low LED density. For a spotless effect, use strips with 96 LEDs/meter or higher.
- Channel not securely hanging: Re-check the tightening mechanism of the hanging wire within the channel and the ceiling mount. Ensure screws are firmly in place.
- Cover not fitting: Ensure the LED strip is properly seated within the channel and not obstructing the cover's grooves. Apply even pressure when pressing the cover into place.
8.保証とサポート
Muzata products are designed for quality and durability. For specific warranty information, please refer to the product packaging or contact Muzata customer service directly.
If you encounter any issues or have questions regarding your Muzata U116 LED Channel, please contact Muzata customer support. You can typically reach us by clicking on the 'Sold by Muzata' link on the product page and using the messaging or phone contact options provided.
