製品終了view
The Artillery Sidewinder X3 Pro is a high-performance 3D printer designed for both beginners and experienced users. It features a robust build, high-speed printing capabilities, and advanced functionalities to ensure precise and efficient model creation.
Figure 1: Artillery Sidewinder X3 Pro 3D Printer, showcasinコンパクトで頑丈なデザインです。
- Ultra-Quiet High-Speed Printing: Capable of printing at speeds up to 300 mm/s while maintaining high precision.
- 49-Point Auto Bed Leveling: Ensures quick and accurate leveling of the build platform, simplifying the setup process.
- Direct Drive Extruder: Features a newly developed metal direct drive extruder with a dual gear set for higher drive ratio and stronger extrusion force, leading to more accurate extrusion.
- Dual Z-axes & Dual Motors: Enhances stability and printing accuracy by reducing lines and ridges on prints.
- 再開印刷機能: Detects filament runout, breakage, or power loss, allowing printing to resume after recovery, preventing material waste.
セットアップと組み立て
The Artillery Sidewinder X3 Pro comes 95% pre-installed, making the initial setup straightforward. Installation to first print typically requires only 4 steps and approximately 10 minutes, even for beginners.
Figure 2: Illustrated assembly steps for the Sidewinder X3 Pro, highlighting the minimal effort required for initial setup.
最初のステップ:
- 開梱: すべての部品をパッケージから慎重に取り出してください。梱包リストに記載されているすべての部品が揃っていることを確認してください。
- Base and Gantry Assembly: Attach the gantry to the printer base using the provided screws.
- ケーブル接続: Connect all necessary cables, ensuring they are securely fastened. Pay attention to the hotend and extruder connections.
- フィラメントの装填: Load your chosen filament into the direct drive extruder.
- 電源オン: 電源コードを接続し、プリンターの電源を入れます。
操作手順
ユーザーインターフェース:
The Sidewinder X3 Pro features a 4.3-inch full-color touchscreen with large icons, providing a simple and feature-rich interface that helps prevent misoperation.
Figure 3: The 4.3-inch full-color touchscreen interface of the Sidewinder X3 Pro, designed for intuitive navigation.
Auto Bed Leveling:
The newly upgraded 49-point auto bed leveling system ensures the build platform is quickly and accurately leveled, which is crucial for successful first layers and overall print quality.
Figure 4: Visual representation of the 49-point smart auto-leveling process, which automatically measures and adjusts the print bed.
高速印刷:
The Sidewinder X3 Pro is engineered for high-speed printing, reaching up to 300 mm/s, allowing for faster completion of prints without compromising precision.
Figure 5: Comparison illustrating the speed advantage of the Sidewinder X3 Pro at 300mm/s compared to slower printers.
Extrusion System:
Equipped with a dual-gear direct extruder, the printer provides powerful and smoother filament feeding, which is essential for consistent and high-quality prints. The all-metal automatic cleaning hotend supports printing temperatures up to 300°C.
図6：詳細 view of the dual-gear direct extruder, designed for powerful and precise filament extrusion.
Figure 7: Illustration of the all-metal automatic cleaning hotend, capable of reaching temperatures up to 300°C.
Print Stability and Accuracy:
The dual Z-axes and dual motors design ensures stable movement of the print head and contributes to higher printing accuracy by minimizing artifacts like lines and ridges on your prints.
Figure 8: Diagram showing the dual Z-axes and dual motors, which provide enhanced stability and precision during printing.
Print Volume and Build Plate:
The printer offers a print size of 9.44" x 9.44" x 10.23" (240mm x 240mm x 260mm), suitable for a wide range of projects. It features a PEI Magnetic Platform with a maximum hotbed temperature of 100°C. Models can be easily removed by slightly bending the platform once cooled.
Figure 9: Illustration of the print volume dimensions and the PEI magnetic build platform, demonstrating easy print removal.
メンテナンス
Regular maintenance ensures the longevity and optimal performance of your Artillery Sidewinder X3 Pro 3D printer.
- Hotend Cleaning: The printer features an automatic cleaning hotend. Periodically inspect the nozzle for any residue or clogs.
- Build Plate Care: Clean the PEI magnetic build plate after each print to ensure good adhesion for subsequent prints. Use isopropyl alcohol for best results.
- 潤滑: Apply a small amount of lubricant to the Z-axis lead screws and smooth rods periodically to ensure smooth movement.
- ファームウェアの更新： Check the official Artillery website for any available firmware updates to ensure your printer has the latest features and bug fixes.
- 一般的な清掃: Keep the printer free of dust and filament debris. Use compressed air to clean hard-to-reach areas.
トラブルシューティング
This section provides solutions to common issues you might encounter during the operation of your Sidewinder X3 Pro.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| プリントがベッドに貼り付かない | Improper bed leveling, dirty build plate, incorrect bed temperature. | Perform auto bed leveling. Clean the build plate with isopropyl alcohol. Adjust bed temperature according to filament type. |
| フィラメントが押し出されない | Clogged nozzle, tangled filament, incorrect hotend temperature, extruder issue. | Check hotend temperature. Clear nozzle clog using a needle or cold pull. Ensure filament spool is free and untangled. Inspect extruder for proper function. |
| Printer Stops Mid-Print | Filament runout/breakage, power loss, corrupted G-code. | Utilize the resume printing function. Check filament path. Ensure stable power supply. Reslice and re-upload G-code. |
| Poor Print Quality (Layer Shifts, Stringing) | Loose belts, incorrect print speed, retraction settings, temperature. | Check and tighten belts. Adjust print speed. Calibrate retraction settings in slicer. Optimize hotend temperature. |
| Touchscreen Unresponsive/Incorrect Language | Software glitch, loose connection, corrupted firmware. | Restart the printer. Check display cable connections. Consider re-flashing firmware if issue persists (refer to Artillery support). |
より複雑な問題の場合、または問題が解決しない場合は、保証およびサポートのセクションで連絡先情報を参照してください。
仕様
| 特徴 | 詳細 |
|---|---|
| モデル | サイドワインダー X3 プロ |
| ブランド | 砲兵 |
| 製品寸法 | 17.6 x 9.76 x 19.7 インチ (447 x 248 x 500 mm) |
| アイテム重量 | 24ポンド（10.89kg） |
| 材料 | 金属 |
| 色 | 黒 |
| 最大印刷速度 | 300mm/秒 |
| 自動レベリング | 49ポイント自動ベッドレベリング |
| 押出機タイプ | デュアルギアダイレクトドライブ押出機 |
| 最大ホットエンド温度 | 300°C (All-Metal Hotend) |
| ビルドプレート | PEI磁性スプリング鋼 |
| Max Hotbed Temperature | 100℃ |
| Z-axis Design | Dual Z-axes & Dual Motors |
| 接続性 | SD Card, USB (assumed) |
| ユーザーインターフェース | 4.3インチフルカラータッチスクリーン |
図10: 次元オーバーview of the Artillery Sidewinder X3 Pro 3D Printer.
保証とサポート
Artillery provides a one-year warranty for the Sidewinder X3 Pro 3D Printer. Additionally, 24-hour after-sales service is available to assist with any inquiries or issues you may encounter.
For technical support, warranty claims, or general inquiries, please contact Artillery customer service through their official channels. Refer to the product packaging or the official Artillery web最新の連絡先情報については、サイトをご覧ください。
保証のために購入証明として購入レシートを保管することをお勧めします。
