1.製品オーバーview
The Juno FMLSQ Square Indoor Flush Mount is a 15-inch LED ceiling light designed for easy installation in various indoor settings. It features a modern aesthetic and offers versatile lighting options. The fixture includes a black interchangeable trim, allowing users to customize its appearance. A built-in switch enables selection of five color temperatures: 2700K (Soft White), 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), and 5000K (Daylight). Additionally, the FMLSQ includes a nightlight solution, providing a low-level light ideal for areas like foyers, hallways, bedrooms, bathrooms, and stairways.
Image: Juno FMLSQ 15-inch square LED flush mount ceiling light highlighting its nightlight feature and interchangeable trim.
2. 安全情報
Before beginning installation, read and understand all instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage, personal injury, or death. Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- 器具の取り付け、保守、または清掃を行う前に、必ず回路ブレーカーで電源をオフにしてください。
- Ensure the input power is 120VAC, 60Hz.
- 配線を変更、移動、または取り外ししないでください。amp ホルダー、またはその他の電気部品。
- 取り付け時には安全メガネと手袋を着用してください。
3. セットアップとインストール
This section provides step-by-step instructions for installing your Juno FMLSQ LED Flush Mount Ceiling Light.
3.1 パッケージ内容
Verify that all parts are included before beginning installation:
- Juno FMLSQ LED Flush Mount Fixture
- 取り付けプレート
- ネジ2本
- 3 Wirenuts
- Black Interchangeable Trim Ring
3.2 インストール手順
- インストールの準備： Turn off all power at the circuit breaker box. Remove any existing light fixture from the junction box.
- ディフューザーを取り外す: Rotate all four clips on the fixture to the OPEN position. Carefully separate the diffuser from the housing assembly.
- 色温度（CCT）を選択: Locate the CCT selection switch on the back of the fixture. Move the switch to select your desired color temperature: 2700K (Warm White), 3000K (Soft White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
- 取り付けプレートを取り付けます: Install the mounting plate and screws provided into the junction box mounting holes. Check the junction box mounting hole dimension to decide which pair of mounting plate slots to use. Install screws into threaded holes in the junction box, rotate the mounting plate to ensure 'A' and 'B' screw holes are parallel with a room wall before tightening screws to secure the mounting plate.
- 配線を接続: Connect the black, white, and copper (ground) wires from the fixture to the corresponding wires in the junction box using the provided wirenuts. Ensure all connections are secure.
- 安全な治具: Align the fixture keyhole slot with the installed screws on the junction box. Push the wires into the junction box, avoiding pinching any wires. Slide the fixture to lock it in place, then secure it by tightening the screws.
- ディフューザーの取り付け: Install the fixture diffuser and rotate the clips to the CLOSED direction to secure it.
- 電力を回復する： Turn electricity back on at the circuit breaker.
Image: Underside of the fixture with clips in the open position, ready for diffuser removal.
Image: Close-up of the CCT selection switch on the fixture's housing.
3.3 Optional: Changing Trim Ring
The FMLSQ fixture ships with a matte white trim. A black interchangeable trim is included in the package for aesthetic customization.
- To change the trim, simply remove the white trim from the diffuser by removing it from the top opening side only.
- Install the black trim from the top opening side of the diffuser and ensure it is securely fastened onto the diffuser.
3.4 インストールビデオ
Video: Detailed installation guide for the Juno Flush Mount Ceiling Light. This video demonstrates the steps for mounting the fixture, connecting wires, and securing the diffuser.
4. 操作手順
Learn how to use the various lighting features of your Juno FMLSQ fixture.
4.1 色温度の選択
The fixture allows you to select from five different color temperatures to suit your preference or room ambiance. This selection is made using a switch on the back of the fixture during installation (refer to Section 3.2, Step 3). The available options are:
- 2700K: ソフトホワイト
- 3000K: ウォームホワイト
- 3500K: ニュートラルホワイト
- 4000K: クールホワイト
- 5000K: 日光
Image: A visual representation of the different color temperatures (2700K to 5000K) provided by the light fixture in a room.
4.2 調光機能
The Juno FMLSQ is dimmable, offering flicker-free dimming from 100% down to 10%. This allows you to adjust the light output to create the desired ambiance. Ensure you use a compatible dimmer switch (sold separately) for optimal performance.
Image: A visual representation of the dimming capabilities of the light fixture, from full brightness to 10% output.
4.3 Nightlight Mode
The fixture includes a nightlight mode, providing a soft, ambient glow. To activate the nightlight mode:
- Turn the light switch ON.
- ライトのスイッチをオフにしてください。
- Within 1 second, turn the light switch ON again. The nightlight mode will activate.
Repeat this sequence to return to normal lighting mode.
Image: Illustration of the wall switch sequence to activate and deactivate the nightlight mode.
4.4 Features Video
ビデオ: 終了view of the Juno Flush Mount's key features, including color temperature selection, dimming, and nightlight functionality.
5. メンテナンス
Regular maintenance ensures optimal performance and longevity of your LED flush mount light.
- クリーニング： Ensure power is OFF at the circuit breaker before cleaning. Wipe the fixture with a soft, damp 布で拭いてください。研磨剤入りの洗剤や溶剤は、仕上げや電気部品を損傷する恐れがあるため使用しないでください。
- 検査： Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off power immediately and consult a qualified electrician.
- LEDは： 内蔵の LED 光源は長期使用を想定して設計されており、交換の必要はありません。
6。 トラブルシューティング
If you experience issues with your Juno FMLSQ light, refer to the following common troubleshooting steps:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しない | No power to the fixture; Loose wiring connection; Faulty switch. | Check circuit breaker and wall switch. Verify all wire connections are secure. Test the switch for functionality. |
| 色温度が正しくありません | CCT スイッチが正しく設定されていません。 | Turn off power at the breaker. Remove the diffuser and adjust the CCT switch to the desired setting. Reinstall diffuser and restore power. |
| 照明が不適切にちらついたり暗くなったりする | 互換性のない調光スイッチ、緩んだ配線。 | Ensure a compatible LED dimmer switch is used. Check wiring connections for tightness. |
| Nightlight mode not activating | Incorrect switch sequence. | Follow the ON-OFF-ON sequence within 1 second precisely. |
7. 仕様
Detailed technical specifications for the Juno FMLSQ 15-Inch Square LED Flush Mount Ceiling Light.
| 特徴 | 詳細 |
|---|---|
| ブランド | ジュノ |
| モデル番号 | FMLSQ 15IN SWW5 90CRI WBT NL M4 |
| 寸法 | 長さ15インチ x 幅15インチ x 高さ3.3インチ |
| 光源の種類 | 導かれた |
| ワットtage | 26ワット |
| 輝度 | 2600ルーメン |
| 色温度 | Adjustable (2700K, 3000K, 3500K, 4000K, 5000K) |
| 調光可能 | Yes (100% down to 10%) |
| 材料 | アクリル |
| インストールタイプ | フラッシュマウント |
| 巻tage | 120ボルト |
| 屋内/屋外での使用 | 屋内 |
| Ratings/Listings | CSA certified, suitable for damp location, Title 24 Part 7 |
| アイテム重量 | 4 ポンド |
Image: Dimensional drawing of the Juno FMLSQ fixture, indicating its 15-inch length and width, and 3.3-inch height.
8. 保証
The Juno FMLSQ 15-Inch Square LED Flush Mount Ceiling Light is covered by a 5-year limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or contact customer support.
9. サポート
For further assistance, technical support, or warranty claims, please contact Juno customer service. Refer to the contact information provided on the product packaging or the official Juno webサイト。
