1. はじめに
Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.
2. 重要な安全情報
Please read all safety warnings and instructions carefully to reduce the risk of fire, electric shock, or injury.
- 電気要件: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
- 給水： Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
- 重量制限： The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
- Lid Caution: The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
- クリーニング： Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
- 能力が低下した子供および個人: この機器は、8 歳以上の子供、身体、感覚、精神能力が低下している人、または経験や知識が不足している人でも、機器の安全な使用に関する監督や指導を受けており、危険性を理解している場合に使用できます。子供は機器で遊ばないでください。子供は監督なしで清掃やユーザー メンテナンスを行ってはなりません。
3. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- XCQQ Bidet Toilet Seat
- 3-way Valve + DMT Pipe (Pre-Installed)
- 固定プレート
- Mounting Hardware (screws, rubber expansion nuts)
- 取扱説明書（本書）
4 製品の特徴
The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:
- 温水洗浄： Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
- シートヒーター: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
- 温風乾燥機： Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
- ソフトクローズ蓋: 叩きつけを防ぎ、騒音を軽減します。
- ナイトライト: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
- セルフクリーニングノズル： A stainless steel nozzle that performs self-cleaning before and after each use.
- LEDディスプレイ： Real-time display of water temperature, seat temperature, and drying temperature.
- Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outage）。
- Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.
Image 4.1: Illustration of the heated toilet seat and warm air drying functions.
Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.
Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.
5.インストールガイド
Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.
Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.
インストール前のチェック:
- トイレの給水を止めてください。
- トイレを流してタンクの水を抜きます。
- 既存の便座と便蓋を取り外します。
ステップバイステップのインストール:
- Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
Image 5.2: Removing the fixing plate from the bidet seat.
- Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
Image 5.3: Securing the fixing plate to the toilet bowl.
- Attach Bidet Unit: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
Image 5.4: Attaching the bidet unit to the fixing plate.
- 給水接続: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
Image 5.5: Connecting the bidet to the toilet's water supply.
- 水と電力の復旧： Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.
Initial Power-On and Water Spray Check:
When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.
If the LED light blinks continuously for more than 5 minutes:
- Unplug the bidet.
- 給水バルブを閉めてください。
- 3〜5分お待ちください。
- Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.
Image 5.6: Important attention notice for initial power-on and LED light behavior.
6. 操作
The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:
画像6.1: 詳細 view of the side control panel, indicating various function buttons.
コントロールパネルの機能:
- 力： ユニットのオン/オフを切り替えます。
- 停止します。 Stops any active washing or drying function.
- スプレー： Initiates a general wash.
- Bidet: Initiates a feminine wash.
- ターボウォッシュ: Provides a stronger, more focused wash.
- 乾燥: 温風乾燥機を作動させます。
- 自動: Starts an automatic washing and drying cycle with a single touch.
- ライト： Toggles the LED night light on/off.
- Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
- ノズル位置（FR/BK）： ノズルの前方または後方の位置を調整します。
- 水温: 水温を調節します。
- シート温度: シートヒーターの温度を調整します。
- メモリ： Saves current settings for personalized use.
Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.
7. メンテナンス
定期清掃:
- ノズルのクリーニング: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
- ユニットクリーニング: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
- Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
- 外観： Wipe down the exterior surfaces, including the control panel, with a soft, damp 布。
長期保存庫：
If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.
8。 トラブルシューティング
このセクションでは、発生する可能性のある一般的な問題について説明します。問題が解決しない場合は、カスタマーサポートにお問い合わせください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 電源が入らない / ユニットがオンにならない | Unit unplugged; GFCI tripped; Power outage. | Ensure the unit is securely plugged into a GFCI outlet. Reset the GFCI if tripped. Check household power supply. |
| LED light blinks continuously for more than 5 minutes after power-on | Initial water fill incomplete or system error. | Unplug the bidet, turn off the water valve, wait 3-5 minutes, then plug it back in without operating functions. The light should stop blinking within 1 minute. Ensure water supply is fully open. |
| No water spray / Weak water pressure | Water supply valve closed; Nozzle clogged; Water pressure setting too low. | Ensure the toilet's water supply valve is fully open. Check for any kinks in the water hose. Clean the nozzle if visibly clogged. Adjust water pressure settings on the control panel. |
| Heated seat not warm / Water not warm | Temperature settings too low; Power save mode active. | Adjust seat and water temperature settings on the control panel. Disable power save mode if applicable. |
| Air dryer not working / Air too hot | Drying function not activated; Temperature setting incorrect. | Activate the drying function. Adjust the drying temperature settings on the control panel. |
| Lid closes too quickly / Does not stay open | Improper installation or alignment. | Recheck the installation of the fixing plate and bidet unit to ensure proper alignment and secure attachment. |
9. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | XCQQ |
| モデル番号 | XCQQ-S8L |
| スタイル | S8L-Elongated (Panel Control) |
| 色 | 白 |
| 材料 | アクリロニトリルブタジエンスチレン（ABS） |
| 形 | 楕円形 |
| 製品寸法 | 20.1 x 17.5 x 5.5インチ |
| アイテム重量 | 12.27ポンド |
| 電源 | AC |
| 巻tage | 120ボルト |
| ワットtage | 1300ワット |
| Temperature Range (Water/Seat) | 59 - 95 Degrees Fahrenheit (Adjustable up to 102°F / 39°C) |
| 最大重量容量 | 280 ポンド |
| プラグフォーマット | B - 米国式（アースプラグ付き） |
10. 保証とサポート
保証情報: Please refer to the product packaging or the official XCQQ web保証条件の詳細については、ウェブサイトをご覧ください。保証請求の際は、購入証明書を保管してください。
カスタマーサポート: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand webサイト。
