ETENWOLF VORTEX S6 Portable Tire Inflator

製品終了view

The ETENWOLF VORTEX S6 is a high-performance cordless air compressor designed for efficient inflation of various items, from heavy-duty vehicle tires to recreational inflatables. It features a powerful 19200 mAh lithium battery, a dual-cylinder motor for ultra-fast inflation, and intelligent auto-stop functionality.

• 超高速インフレ： 1.5 CFM@0 PSI or 42 L/Min@0 PSI, capable of filling a 31” tire (30-35 PSI) in 1 minute.
• 大容量バッテリー： Built-in 19200 mAh lithium battery, able to inflate multiple F150 tires on a single charge.
• 100%デューティサイクル: Durable dual-cylinder and dedicated cooling system allow for continuous inflation without breaks.
• スマート機能： Auto-stop at target pressure, seven preset modes, and preset pressure memory.
• 統合照明: 1000 lumens LED light for illumination in dark conditions, including strobe and SOS modes.
• パワーバンクの機能: USB-C 45W dual-direction fast charging port for charging the unit and powering external electronic devices.

Figure 1: ETENWOLF VORTEX S6 Portable Tire Inflator.

パッケージ内容

開梱時にすべてのアイテムが揃っていることを確認してください。

• VORTEX S6 Air Compressor (x1)
• Air Chuck (x1)
• 45W Charger (x1)
• ノズル (x2)
• ボールニードル（×1）
• Presta Valve Adapter (x1)
• 収納バッグ（×1）
• USB-C - USB-C ケーブル (x1)

Figure 2: All components included in the ETENWOLF VORTEX S6 package.

設定

1. 初期充電

Before first use, fully charge the VORTEX S6. Connect the provided 45W USB-C charger to the unit's USB-C port located at the back (under the flap) and plug it into a wall outlet. The display will indicate charging status.

Figure 3: Charging the VORTEX S6 using the provided USB-C charger.

2.エアホースの取り付け

For high-pressure inflation (tires), attach the high-pressure hose to the brass connector on the side of the unit. For high-volume inflation/deflation (air mattresses, pool floats), use the larger hose that stores in the back channel.

Figure 4: High-pressure hose connection point.

操作手順

1. 電源のオン/オフ

Press and hold the "Start/Pause" button on the central dial to power on the unit. The digital display will illuminate. To power off, press and hold the same button.

2. 単位とモードの選択

• ユニット選択: Press the "Unit" button below the dial to cycle through pressure units (PSI, Bar, KPA).
• モード選択: Rotate the central dial to select from seven preset inflation modes (e.g., car, motorcycle, bicycle, ball, RV, pickup). Each mode has a default pressure setting.
• 圧力の調整: Once a mode is selected, rotate the central dial to adjust the target pressure in 0.1 PSI increments.

Figure 5: Digital display showing current and target pressure, battery level, and mode selection.

3. インフレのプロセス

1. Connect the appropriate hose and nozzle to the item you wish to inflate.
2. 空気の漏れを防ぐために接続がしっかりしていることを確認してください。
3. Select your desired mode and set the target pressure.
4. Press the "Start/Pause" button to begin inflation. The unit will automatically stop once the target pressure is reached.

Figure 6: VORTEX S6 in use, inflating a large vehicle tire.

4. LEDライトの機能

Press the "Light" button on the central dial to cycle through the LED light modes:

• 低輝度
• High Brightness (1000 lumens)
• Strobe Light (for emergencies)
• SOSシグナル

Figure 7: The integrated LED light for visibility in low-light conditions.

5. Power Bank Usage

The VORTEX S6 can act as a power bank. Connect your electronic device (e.g., smartphone, tablet) to the USB-C (in/out) or USB-A (out) ports located under the flap at the back of the unit.

Figure 8: Using the VORTEX S6 to charge other devices.

メンテナンス

• ユニットを清潔に保ち、ほこりや破片がないようにしてください。
• Store in the provided storage bag when not in use to protect it.
• ユニットを極端な温度や直射日光に長時間さらさないでください。
• Regularly check the air hoses and nozzles for any signs of wear or damage.

トラブルシューティング

仕様

Figure 9: Dimensions of the ETENWOLF VORTEX S6.

保証とサポート

The ETENWOLF VORTEX S6 comes with a 2年間保証. For any inquiries or support, please refer to the contact information provided in your product packaging or visit the official ETENWOLF webサイト。

• 3年間の保護プラン
• 4年間の保護プラン
• Complete Protect（対象となる購入をカバーする月額プラン）

製品ビデオ