Coaster Home Furnishings Nathan Eastern King Panel Bed Frame Instruction Manual

導入

This manual provides detailed instructions for the safe assembly, proper usage, and maintenance of your Coaster Home Furnishings Nathan Eastern King Size Panel Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

安全情報

• 組み立て前に、すべての部品が揃っていて損傷がないことを確認してください。部品が不足または破損している場合は使用しないでください。
• 傷や損傷を防ぐために、柔らかく清潔な表面の上でベッドフレームを組み立ててください。
• Two or more people are recommended for assembly to prevent injury and ensure proper alignment.
• Do not overtighten screws or bolts, as this may damage the wood.
• This bed frame requires a foundation (box spring or equivalent) for proper mattress support. Do not place a mattress directly on the slats without a foundation.
• 組み立て中は小さな部品を子供の手の届かないところに保管してください。
• すべての接続がしっかりと固定されているかどうかを定期的に確認してください。

パッケージ内容

パッケージに次のすべてのコンポーネントが含まれていることを確認します。

• ヘッドボード (1)
• フットボード (1)
• サイドレール (2)
• Slats (Set)
• ハードウェアパック（ボルト、ワッシャー、ナット、六角レンチ）

組み立て手順

Follow these steps to assemble your bed frame:

1. エリアを準備する: 組み立てのために広いスペースを確保し、すべての部品とハードウェアを配置します。
2. サイドレールをヘッドボードに取り付けます。 Align the pre-drilled holes on the side rails with the corresponding holes on the headboard posts. Secure using the provided bolts, washers, and nuts. Do not fully tighten yet.
3. サイドレールをフットボードに取り付ける: Repeat the previous step to attach the other ends of the side rails to the footboard. Ensure the footboard's flared legs are correctly oriented.
4. すべての接続を締めます: Once all four corners are connected, carefully tighten all bolts using the Allen wrench. Ensure the frame is stable and square.
5. スラットの取り付け: Place the wooden slats across the width of the bed frame, resting them on the support ledges of the side rails. Ensure they are evenly spaced and secure. Some slats may require screwing into the side rails; refer to your specific hardware for details.

使用ガイドライン

• Foundation Required: This panel bed frame is designed to be used with a mattress foundation (e.g., box spring, bunkie board). A mattress placed directly on the slats without a foundation may void the warranty and lead to premature wear of the mattress and frame.
• 重量配分： Ensure weight is evenly distributed across the bed frame. Avoid standing or jumping on the bed.
• 配置: Position the bed frame on a level surface to prevent wobbling or instability.

メンテナンスとケア

ベッドフレームの外観と耐久性を維持するには、次のお手入れ手順に従ってください。

• クリーニング： Clean the wood surfaces using a damp cloth. Wipe dry immediately to prevent water marks.
• 刺激の強い化学物質を避ける: Do not use strong chemicals, abrasive cleaners, or polishes that may damage the finish.
• 日光への露出: 直射日光に長時間さらさないでください。木材の仕上げが褪色したり変色したりする原因になります。
• 湿度コントロール: 木材の割れや反りを防ぐために、室内の湿度を一定に保ちます。
• ハードウェアチェック: Periodically inspect and tighten all assembly hardware to ensure the frame remains stable.

仕様

Troubleshooting / Common Questions

• ベッドフレームのぐらつき: Ensure all bolts are securely tightened. Check that the bed is on a level surface.
• きしみ音: Squeaking can often be resolved by tightening all hardware. If the issue persists, check the foundation and mattress for proper fit and support.
• Why is a foundation required? Panel beds are designed with slats that provide support for a foundation (like a box spring or bunkie board), which in turn supports the mattress. This design ensures proper mattress longevity and comfort.

保証とサポート

Coaster Fine Furniture products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Coaster Fine Furniture website. For assistance with parts, assembly, or any other inquiries, please contact Coaster Fine Furniture customer service.

また、 Coaster Fine Furniture Store on Amazon 詳しい情報と製品については、こちらをご覧ください。

About Coaster Fine Furniture

Coaster Fine Furniture has been designing, crafting, and distributing stylish furniture for nearly four decades, offering a range of collections to suit various tastes and lifestyles.