1. はじめに
The OOYCYOO MPPT Solar Charge Controller 60A is an advanced device designed to manage power flow from your solar panels to your battery bank. It utilizes Maximum Power Point Tracking (MPPT) technology to optimize energy harvesting, ensuring efficient charging for 12V, 24V, 36V, and 48V battery systems. This controller automatically identifies the system voltage and is compatible with various battery types, including lead-acid and lithium.
画像1.1：正面 view of the OOYCYOO MPPT Solar Charge Controller 60A, showing the LCD display and control buttons.
2 製品の特徴
- MPPT テクノロジー: Maximizes power extraction from solar panels.
- 自動システムVoltage 識別: Supports 12V, 24V, 36V, and 48V systems.
- 高効率: DC/DC transfer efficiency up to 98.7%.
- LCDバックライトディスプレイ: Provides clear real-time operational data.
- 高度な冷却: Scientifically designed convection cooling with integrated fan for optimal temperature management.
- 4-Stage Battery Charging: Includes Bulk, Boost, Float, and Equalization for efficient and safe battery charging.
- マルチバッテリー互換性: Supports lead-acid (sealed, gel, flooded) and lithium batteries (LFP), with user-customizable parameters.
- 包括的な保護: Multiple safety features to protect the controller and connected components.
- 負接地設計: 操作時の安全性を高めます。
画像2.1: 以上view of the controller's features, including LCD display, terminals, and protection icons.
3. Safety Precautions and Protection Functions
To ensure safe operation and prevent damage, observe the following safety guidelines. The controller incorporates several protection mechanisms:
- PV Current/Power Overload Protection
- PV短絡保護
- PV 逆極性保護
- 夜間逆充電保護
- バッテリー逆極性保護
- バッテリーオーバーボリュームtag保護
- Battery Over-discharge Protection
- バッテリー過熱保護
- コントローラー過熱保護
- リチウム電池低温保護
- 負荷短絡保護
- 負荷過負荷保護
- TVS ハイボリュームtageトランジェント保護
Always connect the battery first, then the solar panels, and finally the load. Disconnect in the reverse order.
4. セットアップとインストール
MPPT ソーラー充電コントローラーを適切に設置するには、次の手順に従ってください。
- 取り付け: Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure adequate space around the controller for air circulation.
- バッテリー接続: Connect the battery cables to the controller's battery terminals (labeled '+' and '-'). Ensure correct polarity. The controller will automatically detect the battery voltage. Use 10 AWG wires for power terminals.
- ソーラーパネル接続: Connect the solar panel cables to the controller's PV input terminals (labeled 'SOLAR +' and '-'). Ensure correct polarity. Verify that the open circuit voltage (Voc) and power of your solar array do not exceed the controller's maximum limits for your system voltage.
- 負荷接続（オプション）: Connect your DC load to the controller's load terminals (labeled 'LOAD +' and '-'). Ensure correct polarity.
Image 4.1: Diagram illustrating the connection of solar panels, battery, and DC load to the MPPT controller. It also shows support for parallel connection of two 60A controllers for a total of 120A.
図4.2: 例ample of the MPPT Solar Charge Controller integrated into a residential solar power system, managing power for various household appliances.
画像4.3: 側面 view of the controller highlighting the solar, battery, and load terminals for wiring.
5. 操作手順
Once connected, the controller will automatically begin operation. The LCD display provides real-time information:
- PV 入力: ボリュームを表示しますtageとソーラーパネルからの電流。
- バッテリー： バッテリー容量を表示tage, charge status, and percentage.
- 負荷出力: 巻を示しますtage and current supplied to the load.
コントロールボタン:
The controller features four buttons (A, B, C, D) and a SET button for navigation and parameter adjustment. Refer to the on-screen menu for specific functions. Pressing A+D for 5 seconds typically initiates a reset.
冷却ファンの動作:
The integrated cooling fan activates automatically when the internal temperature exceeds 45°C and deactivates when the temperature drops below 40°C, ensuring optimal performance and longevity.
6. Battery Charging Methods
The OOYCYOO MPPT controller employs a 4-stagバッテリーの健全性と寿命を最適化する充電アルゴリズム:
- バルクチャージ： 最大電流を供給してバッテリーを急速充電します。
- ブーストチャージ： バッテリーをより高い電圧まで充電するtag完全に充電されるようにします。
- フロートチャージ： バッテリーを安全な電圧に維持しますtage、自己放電を補償します。
- イコライゼーション: Periodically overcharges flooded lead-acid batteries to balance cell voltages。
Pre-set charging parameters are available for sealed, gel, flooded lead-acid, and LFP (lithium iron phosphate) batteries. Users can also customize charging parameters to suit other battery types or specific requirements.
7. 仕様
| パラメータ | 価値 |
|---|---|
| 定格充電電流 | 60A |
| システム巻tage | 12V / 24V / 36V/48Vオート |
| 最大。 PV開回路Voltage（Voc） | 160V直流 |
| 最大PV入力電力（12Vシステム） | 720W (Voc ≤ 72V) |
| 最大PV入力電力（24Vシステム） | 1440W (Voc ≤ 108V) |
| 最大PV入力電力（36Vシステム） | 2100W (Voc ≤ 160V) |
| 最大PV入力電力（48Vシステム） | 2800W (Voc ≤ 160V) |
| Power Terminal Wire Size | 10AWG |
| 動作温度 | 40°C (as per specification 4E+1 Degrees Celsius) |
| 寸法（パッケージ） | 35.9 x 15.2 x 6.9 cm |
| 重量（パッケージ） | 1.85キロ |
| 材料 | プラスチック |
| 表示タイプ | 液晶 |
| 欧州連合 | 768420064490 |
Image 7.1: Detailed table showing original battery parameters for 12V, 24V, and 48V systems, including float voltage、undervoltage protection, and maximum PV input power. Also includes PV module series connection guidelines.
画像7.2: View of the internal components, highlighting the copper coil transformer and capacitance, which contribute to the controller's efficiency and stability.
8。 トラブルシューティング
If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, consider the following general troubleshooting steps:
- ディスプレイ/電源なし: Check all wiring connections, especially the battery connection, for proper polarity and secure contact. Ensure the battery has sufficient charge.
- 充電なし: Verify solar panel connections and ensure panels are receiving adequate sunlight. Check PV input voltage on the display. Confirm battery connections are secure.
- エラーコード: If the LCD displays an error code, refer to the specific error message for guidance. If not listed in this manual, consult the manufacturer's support resources.
- 過熱： Ensure the controller is installed in a well-ventilated area and that the cooling fan is operating correctly. Clear any obstructions around the vents.
問題が解決しない場合は、カスタマー サポートにお問い合わせください。
9. メンテナンス
定期的なメンテナンスは、ソーラー充電コントローラーの寿命を延ばし、最適なパフォーマンスを確保するのに役立ちます。
- クリーニング： コントローラーの外側は定期的に乾いた布で埃やゴミを拭き取ってください。通気口にゴミが詰まっていないことを確認してください。
- 接続チェック: Annually inspect all wiring connections for tightness and corrosion. Re-tighten as necessary.
- 環境チェック: Ensure the installation environment remains dry and free from excessive temperatures or humidity.
10. 保証とサポート
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or further assistance, please contact OOYCYOO customer service.
You may also find additional resources by scanning the QR code on the product label or visiting the following link: http://qr61.cn/oQXA1T/qsECN8rL
