Byron DBY-22352BS

Byron Wireless Plug-in Doorbell Set

Model: DBY-22352BS

ユーザー取扱説明書

導入

This manual provides instructions for the installation, operation, and maintenance of your Byron Wireless Plug-in Doorbell Set, Model DBY-22352BS. This set includes a wireless push button and a plug-in door chime, designed for convenient notification of visitors.

パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

Byron Wireless Plug-in Doorbell Set components: a rectangular plug-in chime unit and a smaller oval push button unit, both in black.

Image: The Byron Wireless Plug-in Doorbell Set, showing the main chime unit on the left and the push button on the right. Both units are black with the "Byron" logo.

特徴

設定

  1. プッシュボタン電池を取り付けます。 プッシュボタンcを開くasing (refer to diagrams if available in physical manual) and insert the supplied CR2032 battery, ensuring correct polarity. Close the casin安全に。
  2. プッシュボタンの取り付け:
    • Choose a suitable location near your door, avoiding direct metal surfaces which can interfere with the wireless signal.
    • 取り付け面をよく清掃してください。
    • Use the provided double-sided tape to adhere the push button to the desired location.
  3. Plug in Door Chime: Insert the wireless plug-in door chime into a standard electrical outlet indoors. Ensure it is within the 150-meter unobstructed range of the push button.
  4. ペアリング(必要な場合): The units are typically pre-paired from the factory. If the chime does not ring when the push button is pressed, refer to the "Troubleshooting" section or the full manual for specific pairing instructions.

操作手順

  1. ドアベルを鳴らす: Press the push button once. The plug-in chime will sound the selected melody.
  2. メロディーの変更: Locate the melody selection button on the plug-in chime (refer to product diagrams if available). Press this button repeatedly to cycle through the 16 available melodies. The chime will play a preview 選択したメロディーごとに異なります。
  3. 音量の調整: Locate the volume control button on the plug-in chime. Press this button to cycle through the 5 available volume levels (low to high).

メンテナンス

トラブルシューティング

問題考えられる原因解決
ドアベルが鳴りません。
  • Push button battery is low or depleted.
  • Chime is not plugged in or powered.
  • ユニットが範囲外であるか、信号干渉が発生しています。
  • ユニットはペアになっていません。
  • プッシュボタンの CR2032 電池を交換します。
  • チャイムが機能している電源コンセントにしっかりと差し込まれていることを確認します。
  • Move the chime closer to the push button. Avoid large metal objects between units.
  • Refer to the full manual for pairing instructions if necessary.
チャイムの音量が低すぎます。音量設定が低いです。Press the volume control button on the chime to increase the volume level.
Limited range or intermittent ringing.
  • 障害物(壁、金属構造物)。
  • 他の無線デバイスからの干渉。
  • プッシュボタンの電池残量が少なくなっています。
  • Reposition the chime or push button to minimize obstructions.
  • Ensure the push button battery is fresh.

仕様

保証とサポート

For warranty information, technical support, or to purchase replacement parts, please refer to the official Byron webご購入いただいたサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証請求のために購入証明書を保管してください。

メーカー: バイロン

Webサイト: www.byron.com (元amp(リンクは変更される場合があります)