WORX WG779 Power Share Outdoor Power Tool Kit Instruction Manual

重要な安全情報

Read all safety warnings and instructions before operating any of the tools in this kit. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep all warnings and instructions for future reference.

• 目の保護具、聴覚保護具、丈夫な履物などの適切な個人用保護具を常に着用してください。
• Ensure the work area is clear of debris, children, and pets before operation.
• 可燃性の液体、ガス、粉塵などが存在する爆発性雰囲気内で電動工具を操作しないでください。
• 調整、アクセサリの交換、またはツールの保管を行う前に、ツールからバッテリー パックを取り外してください。
• 製造元が指定したバッテリー パックと充電器のみを使用してください。
• バッテリーパックやツールを火や高温にさらさないでください。
• 工具は慎重に保守してください。 切削工具を鋭く清潔に保ちます。

製品終了view

This WORX Power Share kit includes a 40V Cordless Lawn Mower, a 20V GT 3.0 Grass Trimmer/Edger, a 20V Hedge Trimmer, and a 20V Turbine Blower, along with compatible batteries and a charger. Each tool is designed for specific outdoor maintenance tasks.

含まれるもの

Figure 1: Components of the Worx 40V 14" Cordless Lawn Mower kit, including the mower, two 20V 4.0 Ah batteries, and a dual-port charger.

Figure 2: The Worx 20V GT 3.0 Grass Trimmer/Edger, 20V Hedge Trimmer, and 20V Turbine Blower, shown with two 20V batteries and a charger.

• Worx 40V 14" Cordless Lawn Mower: Features Intellicut technology and 2-in-1 mulching or bagging capability. Powered by two 20V 4.0Ah batteries.
• Worx 20V GT 3.0 Grass Trimmer/Edger: A versatile tool that converts from a trimmer to an edger in seconds, with command feed auto line advance.
• Worx 20V Hedge Trimmer: Equipped with a 22-inch blade and soft over-mold grip for comfortable operation.
• Worx 20V Turbine Blower: Offers high and low-speed settings for efficient debris clearing.
• (2) Worx 20V 4.0Ah Power Share Batteries: Provide power for all tools in the kit.
• デュアルポート充電器: For recharging the 20V batteries.

Figure 3: The Worx Power Share system, demonstrating battery compatibility across 20V, 40V, and 80V tools.

セットアップと組み立て

バッテリー充電

1. デュアルポート充電器を標準の電源コンセントに接続します。
2. Insert the 20V Power Share batteries into the charger slots. Ensure they are fully seated.
3. The indicator lights on the charger will show the charging status. A solid green light typically indicates a full charge.
4. 完全に充電されたら、充電器からバッテリーを取り外します。

40V 14" Cordless Lawn Mower Assembly

1. ハンドルアセンブリ: 芝刈り機のハンドルを広げ、クイックリリースクランプを使用して固定します。ampノブまたはハンドルがしっかりとロックされていることを確認してください。
2. 草収集バッグ： Assemble the grass collection bag if it came disassembled. Attach it securely to the rear discharge opening of the mower.
3. バッテリーの取り付け: Open the battery compartment cover. Insert two fully charged 20V batteries into the designated slots until they click into place. Close the cover.

Figure 4: The Worx 40V 14" Cordless Lawn Mower with batteries and charger, illustrating the complete setup.

20V GT 3.0 Grass Trimmer/Edger Assembly

1. 補助ハンドル: Attach the D-handle to the trimmer shaft at a comfortable position. Tighten securely.
2. ガード設置: Secure the safety guard onto the trimmer head.
3. バッテリーの取り付け: Insert a fully charged 20V battery into the battery slot on the trimmer until it clicks.

20V Hedge Trimmer Assembly

1. ハンドル調整: Adjust the front D-handle to a comfortable grip position.
2. バッテリーの取り付け: Insert a fully charged 20V battery into the battery slot on the hedge trimmer until it clicks.

20V Turbine Blower Assembly

1. ノズルアタッチメント: Attach the blower nozzle to the main unit. Ensure it is securely fastened.
2. バッテリーの取り付け: Insert a fully charged 20V battery into the battery slot on the blower until it clicks.

操作手順

40V 14" Cordless Lawn Mower

1. 刈り取り高さの調整: Use the single-point height adjustment lever to select one of the 6 cutting height positions (2.5" to 3.5").
2. 芝刈り機を始動します: Press and hold the safety button, then pull the bail switch lever towards the handle.
3. Intellicut™ Technology: The mower automatically adjusts torque for thicker grass. For tougher areas, the Intellicut system provides additional power.
4. 芝刈り技術: For best results, mow in straight, overlapping lines. Avoid overloading the mower by cutting excessively long grass in one pass.
5. Mulching/Bagging: The mower supports both mulching and bagging. Ensure the grass collection bag is attached for bagging, or remove it and insert the mulching plug (if included) for mulching.

Figure 5: The Worx 40V 14" Cordless Lawn Mower demonstrating its 2-in-1 mulching or bagging capability.

20V GT 3.0 Grass Trimmer/Edger

1. トリミング： Hold the trimmer firmly with both hands. Press the trigger to start. Move the trimmer in a sweeping motion, keeping the cutting line parallel to the ground.
2. エッジング： To convert to edger mode, rotate the head 90 degrees. Use the guide wheel to maintain a consistent cutting depth along sidewalks or driveways.
3. ラインアドバンス: The command feed system automatically advances the line as needed. Avoid hitting hard surfaces to prolong line life.

20Vヘッジトリマー

1. 起動： Ensure both hands are on the handles. Press the safety switch and then the trigger to start the blades.
2. トリミングテクニック: Use a smooth, sweeping motion. For vertical cuts, move the trimmer up and down. For horizontal cuts, move it across the top of the hedge.
3. ブレード容量: The 22-inch blade is designed for efficient cutting of hedges and shrubs. Avoid cutting branches thicker than the recommended capacity.

Figure 6: A user operating the Worx 20V Hedge Trimmer, showcasing its 22-inch blade for large cutting capacity.

20V Turbine Blower

1. 起動： 電源ボタンを押します。
2. 速度設定: Use the speed selector to choose between low speed for delicate areas or high speed for maximum clearing power.
3. 吹き付け技術： Direct the airflow towards the debris. For stubborn debris, use short, powerful bursts.

メンテナンス

定期的なメンテナンスにより、最適なパフォーマンスが確保され、ツールの寿命が延びます。

一般的なメンテナンス

• Always remove the battery pack before performing any maintenance or cleaning.
• Clean the tools after each use with a damp 布で拭いてください。強力な化学薬品や研磨剤入りの洗剤は使用しないでください。
• Inspect all parts for damage, wear, or loose fasteners before and after each use. Replace damaged parts immediately.
• ツールは子供の手の届かない乾燥した安全な場所に保管してください。

芝刈り機のメンテナンス

• 刃の検査: Regularly check the mower blade for sharpness and damage. A dull or damaged blade can affect cutting performance and balance. Replace or sharpen as needed.
• デッキクリーニング: Clear grass clippings from the underside of the mower deck to prevent buildup and ensure proper airflow for mulching/bagging.
• グラスバッグ： Empty and clean the grass collection bag regularly to maintain efficiency.

Trimmer/Edger Maintenance

• ライン交換: Replace the trimmer line when it runs out. Refer to the product specifications for the correct line diameter.
• ガードクリーニング: Keep the safety guard free of grass and debris.

Hedge Trimmer Maintenance

• ブレードクリーニング: After each use, clean the blades of sap and debris. A light coat of machine oil can help prevent rust and ensure smooth operation.
• 刃研ぎ: If the blades become dull, have them professionally sharpened or replace them.

バッテリーと充電器のメンテナンス

• 電池は直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• バッテリーを長期間放電した状態で保管しないでください。使用していない場合は定期的に充電してください。
• 充電器の接点を清潔に保ち、ゴミが付着しないようにしてください。

トラブルシューティング

This section addresses common issues you might encounter with your WORX Power Share tools.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact WORX customer support.

仕様

一般的な

• ブランド： ワークス
• モデル： WG779
• 電源: Battery Powered (WORX Power Share)
• 電池のタイプ： Lithium-Ion (20V 4.0Ah)

40V 14" Cordless Lawn Mower

• 切断幅: 14インチ
• 切断高さ調整： 6ポジション（2.5インチ～3.5インチ）
• Max Cut Area per Charge: Up to 5000 sq ft (with two 4.0Ah batteries)
• 特徴： Intellicut™ Technology, 2-in-1 Mulching/Bagging

20V GT 3.0 Grass Trimmer/Edger

• 機能性: 2-in-1 Trimmer and Edger
• 改行: Command Feed Auto Line Advance
• 頭の回転： 90° pivoting cutting head

20Vヘッジトリマー

• 刃の長さ: 22インチ
• グリップ： Soft over-mold grip, D-handle

20V Turbine Blower

• 速度設定: 高いと低い

公式製品ビデオ

Watch these official videos for visual guidance on product features and operation.

保証とサポート

WORX products are backed by a manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included with your product or visit the official WORX webサイト。

For customer service inquiries, please contact WORX customer support directly.