KKSB Arduino UNO Rev3 および Arduino Mega Rev3 用ケース取扱説明書

導入

This manual provides detailed instructions for the assembly, installation, and proper use of the KKSB Case, designed for Arduino UNO Rev3 and Arduino Mega Rev3 boards. This robust steel enclosure offers protection and versatile mounting options for your Arduino projects, including space for an Arduino Shield.

パッケージ内容

Please verify that all components are present before proceeding with assembly.

KKSB Case (Steel, black powder-coated)
Mounting screws for Arduino board
Rubber feet (adhesive)
ケーブルグロメット

KKSB Arduino Case Packaging — Figure 1: KKSB Arduino Case packaging. The package contains the steel case and necessary accessories for assembly.

セットアップとインストール

Follow these steps to install your Arduino UNO Rev3 or Arduino Mega Rev3 board into the KKSB Case.

1. ケースを準備する

Carefully remove the lid of the KKSB case by unscrewing the four corner screws. Note that some cases may have additional screws that do not need to be removed for lid access.
If using, attach the adhesive rubber feet to the bottom of the case for stability.

後方 view of KKSB Arduino Case — 図2：背面 view of the KKSB case, showing the Ethernet port cutout, USB-B port, Reset button access, and Power input. This view helps identify port alignment.

2. Install the Arduino Board

Align your Arduino UNO Rev3 or Arduino Mega Rev3 board with the mounting holes inside the case. Ensure that the USB and power ports align with the corresponding cutouts on the case.
Secure the Arduino board to the case using the provided mounting screws. Do not overtighten.
If you are using an Arduino Shield, install it onto your Arduino board before closing the case. The case provides sufficient vertical space for most standard shields.

Arduino board installed inside KKSB case — Figure 3: An Arduino board correctly installed within the KKSB case, demonstrating proper alignment with internal mounting points and external port cutouts.

Arduino board and shield installed inside KKSB case — Figure 4: An Arduino board with an attached shield inside the KKSB case, illustrating the ample space provided for additional components.

KKSB case with Arduino UNO, Mega, and Ethernet Shield — Figure 5: Components including the KKSB case, an Arduino UNO, an Arduino Mega, and an Ethernet Shield, demonstrating compatibility and potential configurations.

3。ケースを閉じる

Replace the lid and secure it with the four corner screws.
If routing cables, use the provided cable grommet in the designated opening to protect wires from sharp edges.

操作上の考慮事項

The KKSB Case is designed to protect your Arduino board while providing access to essential ports and features.

ポートアクセス: All standard Arduino UNO/Mega ports, including USB-B, power jack, and reset button, are accessible through labeled cutouts.
Shield Compatibility: The case accommodates an Arduino Shield, allowing for expanded functionality without requiring external modifications.
ケーブル管理 Openings are provided for routing cables, and a grommet is included for protection.
換気： The case features ventilation slots to aid in passive cooling of the internal components.

角度付き view of KKSB Arduino Case with ports — 図6: 角度付き view of the KKSB case, highlighting the accessible ports and the overall robust construction.

取り付けオプション

The KKSB Case offers several mounting solutions for integration into various environments.

DINレール取り付け： The case supports DIN rail mounting for industrial or organized setups.
Pre-cut Mounting Holes: Additional pre-cut mounting holes are available for custom installations.
Kensington Lock Compatibility: A slot is included for a standard Kensington lock, providing a theft deterrent for public or shared environments.

KKSB Arduino Case mounted on a DIN rail — Figure 7: The KKSB case securely mounted on a DIN rail, demonstrating its compatibility with industrial mounting standards.

KKSB Arduino Case with Kensington lock installed — Figure 8: A Kensington lock inserted into the designated slot on the KKSB case, illustrating the security feature.

メンテナンス

The KKSB Case requires minimal maintenance.

クリーニング： 外側は柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
検査： Periodically check screws for tightness, especially if the case is subjected to vibrations or frequent movement.
環境： Ensure the case is used in a dry environment, away from excessive dust or moisture, to protect the internal electronics.

トラブルシューティング

インストール中または使用中に問題が発生した場合は、次の点を考慮してください。

Board Not Fitting: Ensure you are using a compatible Arduino UNO Rev3 or Arduino Mega Rev3 board. Verify that no components on the board are obstructing the mounting posts or case edges.
Port Misalignment: Double-check the orientation of the Arduino board before securing it. The ports should align perfectly with the case cutouts.
蓋が閉まらない： Ensure all internal components, especially shields, are seated correctly and not exceeding the case's internal height. Verify that no wires are pinched.

仕様

ブランド	KKSB事件
モデル番号	7350001161273
互換性	Arduino UNO Rev3, Arduino Mega Rev3 (and compatible clones)
材料	Steel, black powder-coated
寸法（長さx幅x高さ）	2.99 x 4 x 4.5 インチ (7.59 x 10.16 x 11.43 cm)
アイテム重量	9.1オンス（0.26 kg）
特徴	Space for Arduino Shield, labeled cutouts, cable routing openings, Kensington lock slot, DIN Rail mounting support, pre-cut mounting holes.

保証とサポート

For warranty information or technical support, please refer to the official KKSB Cases web当サイトをご覧いただくか、販売店にお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。

Official KKSB Cases Webサイト： kksb-cases.com

KKSB Cases 7350001161273

KKSB Arduino UNO Rev3 および Arduino Mega Rev3 用ケース取扱説明書

導入

パッケージ内容