UniFormation GKtwo 8K レジン 3D プリンター ユーザーマニュアル

導入

This manual provides essential information for the safe and efficient operation of your UniFormation GKtwo 8K Resin 3D Printer. Please read it thoroughly before initial use and keep it for future reference.

The UniFormation GKtwo is a high-resolution 8K resin 3D printer featuring a 10.3-inch monochrome LCD screen, a built-in heating system, and an odor removal filter, designed for detailed and large-volume resin printing.

パッケージ内容

Upon unboxing, please verify that all components listed below are present and undamaged.

図 1: パッケージの内容。 This image displays all items included in the UniFormation GKtwo 3D printer package, including the printer unit, build plate, resin vat, power cord, U disk, gloves, plier, rubber scraper, nFEP film, wrench tools kit, funnel, metal scraper, and screen protector.

• 3D Resin Printer (GKtwo 8K)
• ビルドプレート
• レジンバット
• スクリーンプロテクター
• 電源コード
• Uディスク
• 金属スクレーパー
• 手袋
• nFEPフィルム
• プライヤー
• Wrench Tools Kit
• 漏斗
• Rubber Scraper

設定

1. 開梱と初期検査

Carefully remove the printer from its packaging. Inspect the unit for any visible damage that may have occurred during transit. Remove all protective films and packaging materials.

Figure 2: Removing Protective Film. Ensure all protective films, especially from the LCD screen, are carefully removed before operation.

2. Installing the Carbon Filter

The GKtwo features a built-in odor removal filter. Install the carbon filter into its designated slot at the rear of the printer.

Figure 3: Powerful Air Filter. The diagram illustrates the large volume activated carbon filter and 4000 RPM high-speed purification fan, crucial for odor removal.

3. 電源接続

Connect the power cord to the printer and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.

4. Build Plate and Resin Vat Installation

Install the resin vat onto the LCD screen area. Then, attach the build plate to the Z-axis arm. The GKtwo features a quick-release design for easy installation and removal.

Figure 4: User-friendly Design. This image highlights the vertical flip-up cover, quick-release build plate, and screwless resin vat for convenient operation.

5. ビルドプレートの水平調整

The GKtwo build plate is pre-leveled at the factory. However, it is recommended to verify the leveling before the first print or if print failures occur. Use the provided leveling paper.

1. LCD 画面に水準器を置きます。
2. Lower the build plate until it gently presses the paper.
3. Ensure the paper can be pulled with slight resistance from all sides. Adjust if necessary using the Z-axis movement controls on the touchscreen.

操作手順

1. Powering On and User Interface

Press the power button to turn on the printer. The 5-inch touch screen will display the user interface, allowing access to various functions.

Figure 5: User-Friendly UI. The interface provides real-time temperature monitoring and settings for the heating system, along with other printer information.

2. Heating System Operation

The GKtwo features a built-in PTC ceramic heating technology to maintain optimal resin temperature. You can set the desired temperature (77°F, 86°F, 95°F) via the system settings.

Figure 6: GKtwo 8K Resin 3D Printer. The printer is shown alongside a highly detailed 3D printed model, demonstrating its capability.

3. 印刷用のモデルの準備

The GKtwo is compatible with popular slicers like Chitubox and UniFormation slicer. For optimal results, use UniFormation's recommended preset profiles.

• Import your 3D model (.STL, .OBJ, etc.) into your chosen slicer software.
• Adjust print settings (layer height, exposure time, lift speed, etc.) according to your resin type and desired print quality.
• Add supports as necessary for complex geometries.
• Slice the model and save the print file (.ctb) to the provided U disk.

Figure 7: Highly-detailed Printing. This image highlights the 8K monochrome screen with 7680x4320 px resolution and 29.6 micron XY resolution, enabling exceptional detail.

Figure 8: Non-submersible Build Plate. The design features a gutter around the edge to save resin drips and facilitate easy cleaning.

4. 印刷を開始する

1. Insert the U disk into the printer's USB port.
2. On the touchscreen, navigate to "U Disk" or "Built-in Storage" to select your print file.
3. Ensure the resin vat is filled with resin, not exceeding the MAX fill line (700g).
4. Confirm the print settings and press "Start" to begin printing.

Figure 9: Resin Filling. Fill the resin vat carefully, ensuring not to exceed the maximum fill line to prevent overflow during printing.

メンテナンス

1. Cleaning the Resin Vat and Build Plate

After each print, or if changing resin types, clean the resin vat and build plate thoroughly with isopropyl alcohol (IPA).

• Remove the build plate and scrape off any remaining resin. Clean with IPA.
• Carefully pour unused resin back into its bottle using a filter funnel.
• Clean the resin vat and FEP film with IPA. Avoid using sharp objects on the FEP film.

2. Replacing the Carbon Filter

The honeycomb carbon filters in the odor purification system should be replaced every 15 days for optimal air purity, especially with constant printing.

3. LCD Screen Protection

The LCD screen has an upgraded anti-scratch film to protect against accidental resin leakage. Regularly inspect the screen for any damage or cured resin and clean gently.

Figure 10: Screen Protector. The printer comes with a screen protector to safeguard the LCD from resin spills and scratches.

トラブルシューティング

仕様

保証とサポート

For warranty information and technical support, please refer to the official UniFormation web購入サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。購入証明書としてレシートを保管してください。

追加のリソースとFAQについては、 UniFormation Store on Amazon.

ユーザーマニュアルの PDF 版はダウンロード可能です。 ユーザーマニュアル（PDF）.