重要な安全上の注意事項
Please read all instructions carefully before using the OFFNOVA Heat Press. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always connect the heat press to a grounded outlet with the correct voltage（110V）。
- Do not operate the heat press if the power cord or plug is damaged.
- Keep hands and fingers away from the heating plate during operation to prevent burns.
- ヒートプレスが安定した耐熱性の表面上に置かれていることを確認してください。
- Do not leave the heat press unattended while it is powered on or heating.
- Unplug the heat press when not in use and allow it to cool completely before storing.
- This appliance is equipped with overheat protection and an automatic shut-off feature for enhanced safety.
製品終了view
The OFFNOVA im·pression Heat Press is a compact and efficient tool for various heat transfer applications. Its user-friendly design and advanced heating technology ensure professional results for your DIY projects.
コンポーネント
- 加熱プレート付きヒートプレスユニット
- 断熱滑り止めベース
- LCDディスプレイ
- Control Buttons (Power, Temperature Up/Down, Time Up/Down, Start/Stop)
- 電源コード
仕様
| 特徴 | 価値 |
|---|---|
| 定格巻tage | 110ボルト |
| 定格出力 | 1150ワット |
| 加熱プレートのサイズ | 23 cm x 23 cm（9インチ x 9インチ） |
| 時間範囲 | 0～600秒 |
| 温度範囲 | 100〜205°C / 210〜400°F |
| 加熱時間 | Approx. 5 minutes to 400°F |
| 総重量 | 2.9キロ |
| モデル番号 | im·pression (886361039) |
設定
Follow these steps to set up your OFFNOVA Heat Press for first-time use.
- 開梱: Carefully remove the heat press and all accessories from the packaging. Retain the packaging for future storage or transport.
- 配置: Place the heat press on a flat, stable, and heat-resistant surface. Ensure there is adequate space around the unit for ventilation and safe operation. The insulated anti-slip base provides stability and protects your work surface.
- 電源接続: Insert the power cord into the heat press unit, then plug the other end into a standard 110V grounded electrical outlet.
操作手順
基本操作
- 電源オン: 電源ボタンを押します（⏻) to turn on the heat press. The LCD display will illuminate.
- 設定温度： 温度ボタン（🌡️) once to enter temperature setting mode. Use the up (∧）とダウン（∨) arrows to adjust the desired temperature. Press the temperature button again to confirm.
- 設定時間: Press the time button (⏱️) once to enter time setting mode. Use the up (∧）とダウン（∨) arrows to adjust the desired time in seconds. Press the time button again to confirm.
- 熱を加える: Once temperature and time are set, the heat press will begin to heat up. Place your material and transfer design on a flat, heat-resistant surface. When the desired temperature is reached, place the heat press firmly onto your design. Press the start button (▶) to begin the countdown. A beep will sound when the time is complete.
高度な機能
- 華氏/摂氏切り替え: To switch between Fahrenheit (°F) and Celsius (°C), press and hold the temperature button (🌡️) for a few seconds until the unit changes.
- オートオフ機能: For safety, the heat press will automatically shut off after 10 minutes of inactivity.
- 均一加熱技術： The dual-tube heating element ensures uniform heat distribution across the entire 9" x 9" heating plate, minimizing temperature differences to approximately 5°C between the center and edges.
応募ガイドライン
The OFFNOVA Heat Press is suitable for a wide range of heat transfer materials and projects, including:
- Sublimation transfers
- All types of Heat Transfer Vinyl (HTV), such as Glitter, Foil, Holographic, Mosaic, and Fusible fabric
- Infusible Ink Paper
Common projects include custom designs on T-shirts, tote bags, pillows, and mouse pads.
メンテナンス
適切なメンテナンスを行うことで、ヒートプレス機の寿命が長くなり、最適なパフォーマンスが確保されます。
- クリーニング： After each use, ensure the heat press is unplugged and completely cooled. Wipe the heating plate with a soft, damp 残留物を布で拭き取ってください。研磨剤入りの洗剤や溶剤は使用しないでください。
- ストレージ： Store the heat press in a dry, cool place, away from direct sunlight and moisture. Use the insulated base for safe storage.
トラブルシューティング
If you encounter issues with your OFFNOVA Heat Press, refer to the table below for common problems and solutions.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ヒートプレスの電源が入らない | No power supply; damaged cord/plug | Check power outlet and connections. Ensure cord is not damaged. |
| 不均一な加熱 | Incorrect placement; internal issue | Ensure the heat press is on a flat, stable surface. If problem persists, contact support. |
| Overheating or not reaching set temperature | 間違ったボリュームtage; sensor malfunction | Ensure you are using a 110V power supply. If the issue continues, contact customer support. |
| ディスプレイが機能しない | Power issue; internal fault | Check power. If still not working, contact customer support. |
保証とサポート
The OFFNOVA Heat Press comes with a 12ヶ月保証 購入日から、製造上の欠陥および通常使用における故障をカバーします。
For technical support, warranty claims, or any inquiries, please contact OFFNOVA customer service through the platform where you purchased the product (e.g., Amazon) or visit the official OFFNOVA website for contact information. Please have your model number and purchase details ready when contacting support.
