導入
The Infinity Primus 603F 6.5-inch 2-Way Multi-Element Speakers are designed to enhance your in-car audio experience. Featuring patented Plus One woofer cone architecture and edge-driven silk dome tweeters, these speakers deliver clear vocals, crisp high frequencies, and defined bass. The compact design facilitates installation in various vehicle types, and the vented basket frame promotes cooling for reliable performance.
箱の中身
- スピーカー x 2
- ネジ8本
- 8倍速クリップ
- 2x 18AWG、長さ200mmのピグテールケーブル
- 1x フォームガスケット
- 2x ブランドステッカー
- 1xオーナーズマニュアル
主な特徴
- プラスワンウーファーコーンアーキテクチャ： Provides increased speaker cone area (up to 35%) compared to other cones in its class, contributing to enhanced bass output and overall sound efficiency.
- エッジ駆動シルクドームツイーター： Expands the high-frequency range, ensuring detailed and natural reproduction of high notes.
- コンパクトなデザイン: Engineered for easy installation in tight spaces, allowing compatibility with a wider range of vehicles without extensive modifications.
- Vented Basket Frame: Designed to cool the voice coils, improving speaker reliability and performance by dissipating heat effectively.
- Consistent Sound Signature: Carefully tuned to deliver the characteristic Infinity sound, known for its balanced and clear audio reproduction.
設定
- 準備： Ensure your vehicle's audio system is turned off and the battery is disconnected before beginning installation. Gather all necessary tools, including screwdrivers, wire strippers, and any specific mounting hardware.
- Speaker Removal: Carefully remove existing speakers from their mounting locations. Refer to your vehicle's service manual for specific instructions on panel removal and speaker access.
- 取り付け: Position the new Infinity Primus 603F speakers in the desired location. Utilize the provided screws and speed clips to secure the speakers firmly. The compact design aids in fitting into various spaces. Ensure no wires are pinched or obstructed.
- 配線： Connect the speaker wires to your vehicle's audio system. Use the provided 18AWG pigtail cables if needed. Pay close attention to positive (+) and negative (-) terminals to ensure correct polarity. Incorrect wiring can lead to poor sound quality or damage.
- テスト: Once speakers are securely mounted and wired, reconnect the vehicle battery and test the audio system at a low volume. Gradually increase the volume to check for proper function and sound quality.
- 最終組立: Reinstall any removed panels or grilles. Ensure all components are reassembled correctly and securely.
オペレーティング
Once installed, the Infinity Primus 603F speakers operate as part of your vehicle's audio system. Adjust your head unit's settings (bass, treble, balance, fader) to optimize the sound to your preference. These speakers are designed to deliver a balanced sound profile with clear highs and defined lows.
メンテナンス
- クリーニング： Periodically wipe the speaker grilles and surrounding areas with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- 検査： Occasionally inspect the speaker cones and surrounds for any signs of damage or wear. Ensure all mounting screws remain tight.
- 環境要因: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures for prolonged periods, as this can affect performance and longevity.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スピーカーから音が出ない | Incorrect wiring; loose connections; ampライターの問題、ヘッドユニットの問題。 | すべての配線接続の極性と締め付けが正しいことを確認してください。 ampライターとヘッドユニットは正常に機能しています。 |
| 歪んだ音 | Overpowering speakers; incorrect gain settings; damaged speaker cone/surround. | 音量を下げるか、 amplifier gain. Check speaker for physical damage. Ensure power handling limits are not exceeded. |
| 低音が弱い、または全くない | Incorrect polarity; phase issues; inadequate power. | Verify correct wiring polarity. Check head unit/amplifier settings for bass boost or crossover. Ensure sufficient power is supplied. |
| 断続的な音 | Loose wiring connections; faulty speaker wire. | Inspect all connections for looseness. Replace damaged speaker wire. |
仕様
| 仕様 | 価値 |
|---|---|
| ウーファーサイズ | 6-1/2インチ（6.5インチ） |
| ウーファー素材 | Polypropylene Driver |
| ツイータータイプ | シルクドーム |
| ツイーターのサイズ | 1/2インチ |
| 電力処理（RMS） | 50ワーム |
| パワーハンドリング（ピーク） | 150Wピーク |
| 感度 (2.83V@1m) | 92デシベル |
| 周波数応答 (-6dB) | 55Hz – 20kHz |
| 公称インピーダンス | 3.0オーム |
| クロスオーバーポイント | 5kHz@6dB/オクターブ |
| 取り付けタイプ | フラッシュマウント |
| 製品寸法 | 奥行き15インチ x 幅4インチ x 高さ8インチ |
| アイテム重量 | 3.1 ポンド |
公式製品ビデオ
ビデオ1: 公式製品ビデオショーasing the design and features of Infinity Reference Speakers, including the Plus One woofer cone and silk dome tweeters.
保証とサポート
この製品には、 限定保証. For detailed warranty information, terms, and conditions, please refer to the included owner's manual or visit the official Infinity website. For technical support or service inquiries, please contact Infinity customer service.
